Creating Wedding Pew Ends: A Guide To Tying The Knot

Pew ends are a great way to decorate your wedding ceremony and create a gorgeous atmosphere. They can be made with flowers, bows, or other materials, and can be easily crafted at home. Pew ends can be attached to the ends of pews or chairs using ribbon, twine, or special clips, adding a romantic touch to your wedding ceremony.

Using dried flowers like lavender

Dried flowers, such as lavender, are a beautiful and inexpensive way to decorate your wedding pew ends. Not only will they create a romantic walkway for the bride, but they will also fill your ceremony space with a delightful fragrance. The best part? You can prepare these decorations well ahead of time, and they will last long after your special day.

When using dried flowers like lavender, simplicity is key. A lovely way to incorporate lavender into your pew ends is by creating bunches. Pick or purchase lavender blooms and assemble them into bunches of around 20. Then, use a ribbon that complements your wedding colour palette to tie each bunch together, leaving enough ribbon to loop over the pew ends. You can make these bunches a few days in advance and put them in place the day before, as dried lavender will not wilt and will only become more fragrant.

If you're looking for something a little more creative, consider combining lavender with other dried flowers or elements. For a rustic touch, pair lavender with burlap. You can tie a bunch of lavender with a burlap ribbon or create a bow from hessian fabric to add a whimsical detail to your pew ends. Another option is to use dried lavender alongside fresh or dried baby's breath, also known as Gypsophila. This combination will add texture and volume to your decorations. You can find dried baby's breath at craft stores or online.

To attach your dried flower pew ends, be mindful of the venue's restrictions. Some churches may not allow the use of adhesive tapes or tack, so ribbon and twine may be your best options. Ensure that your decorations are securely attached, especially if your ceremony is outdoors, to avoid any surprises on a windy day.

With dried lavender pew ends, you can create a romantic and fragrant atmosphere for your wedding ceremony without breaking the bank. These decorations are easy to assemble and can be prepared ahead of time, making them a stress-free choice for your big day.

Hydrangeas in mini buckets

Hydrangeas are delicate and classic flowers that come in a range of colours, including pink, purple, blue, white, green, and red. They are perfect for a DIY wedding as they are versatile, chic, and always classy. You can use them sparingly or make them the theme for the entire wedding. They can be used in bouquets, arrangements, or even on the cake.

If you want to use hydrangeas for your wedding, you can either pick blooms from your own or a friend's garden, purchase them directly from a grower, or use a florist. Picking your own hydrangeas can save you a lot of money, but it's important to plan ahead and learn about handling them. Hydrangea blooms are typically at their peak for 2-3 weeks and occasionally change colour as they age. They should be hydrated as soon as you receive them and placed in cool temperatures.

If you're purchasing hydrangeas, you can either buy them from a grower and arrange them yourself, or use a florist who will provide the hydrangeas and create the arrangements. Florists can obtain hydrangeas at any time of year and have a lot of experience designing sophisticated and beautiful displays. They can also take some of the stress out of wedding planning and will be aware of the rules and traditions of local churches.

Paper strip hearts

To make paper strip hearts, you will need:

• Two sheets of matching paper (scrapbook paper is a good option for the variety of patterns and colours)
• Spray glue
• Scissors
• Hole punch
• Ribbon
• Stapler

Firstly, glue and stick two sheets of paper together, white sides facing. Cut the paper into strips—you will need seven strips for each heart. Cut two 12-inch strips, two 10.5-inch strips, two 9-inch strips, and one 6-inch strip. Punch a hole in the top of the 6-inch strip, and thread a piece of ribbon through it for hanging.

Next, assemble the strips as follows: the 6-inch strip should be central, with the 12-inch strips on either side, followed by the 10.5-inch strips, and then the 9-inch strips. Ensure the bottoms of the strips sit neatly at 3 inches from the top of the central piece, and staple in place. Bend the strips down to the bottom of the central piece, and staple in place. Cut another piece of ribbon, about 10 inches long, and thread it through the hole at the top of the heart, securing with a knot.

You can hang these hearts on their own or as a garland on a length of ribbon.

Using wired ribbon to create bows

Wired ribbon is a great way to create gorgeous, voluminous bows without a lot of complicated tying. You can use wired ribbon to make a variety of different bows for your wedding pew ends. Here are some ideas:

Traditional Pew Bow

To make a traditional pew bow, you will need 3 yards (2.74 m) of ribbon that is approximately 6 inches thick, as well as some scissors and invisible tape or crafting wire. First, make a loop by holding one end of the ribbon steady and folding the ribbon over on itself. Then, twist the remaining ribbon to the right and make another loop at an angle to the first loop. Continue making loops by twisting the ribbon back and forth, holding the centre of each loop as you go. Make about 12 loops in total. Next, take a 12-inch (30 cm) strip of ribbon and wrap it around the middle of the bow where all the loops meet. Tie a knot or bow to keep the loops steady, allowing the remaining ribbon to fall down the middle. You can add some detail to the bow by cutting a 3-inch (7.6 cm) line in the middle of each loop, then unfold the bow. Adjust the loops by pulling on them and fanning them out. Finally, attach the bow to the pew using invisible tape or crafting wire.

Tulle Pew Bow

For a tulle pew bow, you will need wired ribbon, tulle, scissors, and twist ties. Cut two to three-foot lengths of both the wired ribbon and the tulle. Make 8 to 12 loops out of the wired ribbon, holding the centre of the bow as you go. Wrap a twist tie around the centre of the ribbon bow and tighten it. Then, attach a tail by folding a length of ribbon in half and placing the centre against the centre of the bow. Redo the twist tie with the tail attached. Make the tulle bow loops in the same way, ensuring they are larger than the wired ribbon loops. Attach the tulle bow with a twist tie, then add the tail. Finally, place the wired ribbon bow on top of the tulle bow and tie the two twist ties together to join the bows.

Pew Bow with Flowers

This design uses wired organza ribbon, a rose or other large bloom, baby's breath or other filler flowers or greenery, and floral tape and wire. First, cut the rose stem to about 6 inches long and arrange the baby's breath behind it, trimming the stem to match. Use floral tape to wrap the stems together. Then, fold the ribbon in half and make a loop that is slightly larger than you need to attach it to the pew. Tie a simple knot, or make a small loop if you will be wiring the bow to the pew. Spread the two ribbon ends apart at the knot and place the flowers in the middle, attaching them with floral wire. Make a loop with one end of the ribbon, then wrap the other end around it and tie a simple bow over the flowers. Adjust the loops and cut the ribbon ends at an angle to finish.

Gypsophilia and burlap

Gypsophilia, or Baby's Breath, is an affordable option for wedding pew ends, especially if you're going for a rustic theme. You can buy big sprays of this delicate white flower for very little and arrange them into a decent-sized bouquet.

To make the pew ends, start by tying the gypsophilia together with string or ribbon. Then, create a bow from a strip of burlap, also known as hessian fabric. You can find a tutorial online for how to tie a bow. If your budget allows, add a contrasting rose to the bouquet for a pop of colour.

Once you've made your gypsophilia and burlap pew ends, you can attach them to the pews using ribbon or twine. If you're having an outdoor wedding, make sure they're secured properly in case of wind. You could also add some dried gypsophilia to your pew ends, which will smell beautiful and won't wilt.

These rustic pew ends will create a romantic walkway for the bride and brighten up the ceremony space. They're an easy and inexpensive DIY decoration that will wow your wedding guests!

Frequently asked questions