Guide To Gluing Lace On Wedding Invitations

Creating wedding invitations with lace can be a delicate task, especially when it comes to gluing. The right adhesive is crucial to achieving a polished, professional look without lumps, bumps, and wrinkles. While glue sticks are readily available and easy to use, they may not be the best option as they can curl the paper and lace. Instead, consider using double-sided tape, glue dots, or spray adhesive. Double-sided tape and glue dots are easy to apply, lie flat, and leave no adhesive residue. Spray adhesive, such as 3M Super 77, is ideal for bonding paper and fabric without wrinkling but should be used in a well-ventilated area due to health risks associated with the fumes. For a mess-free option, the Scotch Adhesive Tape Gun Applicator is a versatile and easy-to-use tool that dispenses double-sided tape with precision. Zip Dry Paper Glue is another option specifically designed for paper, but it must be used sparingly to avoid bleeding through the lace.

Glue dots

When using glue dots, it is important to purchase the variety that is most appropriate for your needs. For example, you can choose between permanent, temporary, or repositionable glue dots, as well as different sizes. For attaching lace, it is recommended to use flat glue dots to avoid a bumpy effect.

To use glue dots, simply peel them off the base sheet and place them on the desired surface. Press firmly, then remove the top layer by pulling the peel-away tab to expose the other adhesive side. Once you have the desired number of glue dots in place, press the lace firmly onto the invitation.

Double-sided tape

When using double-sided tape, you have two main options: "edge-to-edge" tape or "finger-lift" tape. "Edge-to-edge" tape goes right up to the edge of the backing, while "finger-lift" tape has a wider backing that doesn't go all the way to the edge, making it easier to peel off. The choice between the two comes down to personal preference, as both types will effectively stick lace to your invitations.

To use double-sided tape for your lace invitations, start by cutting or tearing the tape to the desired length. Then, stick the tape onto the lace, and remove the backing. Finally, place the laced invitation onto the card stock. Be sure to place the lace carefully, as it can be tricky to remove or adjust once the tape is stuck down.

One advantage of double-sided tape is that it dries flat, strong, and without any lumps, bumps, or wrinkles. It is also not sticky, runny, or messy, and there are no worries about it drying out like glue. However, keep in mind that removing the tape may leave a sticky residue or damage the paper.

Spray adhesive

When using spray adhesive to attach lace to your wedding invitations, follow these steps:

• Ensure your work area is well-ventilated or take your project outdoors.
• Place the invitation on a flat surface.
• Spray the adhesive directly onto the lace. Be sure to cover all the areas that will be in contact with the invitation.
• Carefully position the lace on the invitation, smoothing out any bumps or wrinkles.
• Gently press the lace in place, ensuring good contact with the invitation.
• Allow the adhesive to dry completely before handling the invitations further.

By following these steps, you can create elegant and professional-looking lace wedding invitations using spray adhesive.

Pros and cons of Zip Dry Paper Glue

Zip Dry Paper Glue is a popular adhesive for wedding invitations. It is a liquid glue designed specifically for use with paper, although it can also be used for small embellishments.

Pros

Zip Dry Paper Glue is a fast-drying adhesive that sets within 10 seconds and fully dries within 10 minutes, depending on the amount used. It dries clear and is wrinkle-free, with no bumps or air pockets. It is also very inexpensive, costing around $5.00-$6.00 USD. The glue also allows for some readjustment, as it sets after 10 seconds and fully dries within 10 minutes.

Cons

The main disadvantage of Zip Dry Paper Glue is that it must be applied very precisely. Using too much glue will cause it to bleed through the paper and ruin the invitation. The bottle can also be a little difficult to squeeze, and the glue is quite stringy and runny, so care must be taken to avoid making a mess. The glue also has a strong odour, so it is recommended to use it in a well-ventilated area.

Additional Considerations

While Zip Dry Paper Glue is a good option for adhering paper, it may not be suitable for attaching larger embellishments like lace to wedding invitations. In such cases, other adhesives like double-sided tape, glue dots, or spray adhesive may be more suitable. These alternatives can provide a neater and more secure attachment for delicate materials like lace.

Pros and cons of a Scotch Adhesive Tape Gun Applicator

The Scotch Adhesive Tape Gun Applicator is a handy tool for applying adhesive transfer tape with speed, precision and ease. Here are some pros and cons to consider:

Pros:

• Fast and Efficient Application: The applicator allows for quick and easy single-handed operation, making it ideal for small to medium assembly jobs as well as light and heavy-duty industrial applications.
• No Mess, No Cleanup: The applicator applies adhesive while simultaneously removing and rewinding the liner, eliminating the need for cleanup. It also provides consistent thickness without oozing, glue lines or aerosol adhesive overspray.
• Controlled Application: With a squeeze of a trigger, you can control the application of adhesive with precision.
• Versatility: The Scotch ATG Adhesive Applicator can be used on a variety of materials such as metal, plastic, foam and paper. It is compatible with both 3/4" and 1/2" width adhesive rolls, providing flexibility for different projects.
• Durability: The covered gears minimize applicator jams, ensuring smooth and reliable performance.
• Visual Verification: The transparent cover allows for quick inspection of the remaining tape, so you know when to replace the roll.

Cons:

• Cost: Some users have mentioned that the Scotch ATG Adhesive Applicator is more expensive than other tape dispensers, especially for those who are not regularly involved in crafting or industrial applications.
• Size and Bulkiness: The applicator is larger in size compared to smaller tape dispensers, which may make it cumbersome for certain projects or storage.
• Learning Curve: While the applicator is easy to use, some users have mentioned that the instructions for loading the tape could be clearer, requiring additional time to understand the process.
• Adhesion Issues: There have been mixed reviews regarding the adhesion of the tape. Some users have experienced issues with the tape twisting and becoming sticky, requiring extra care when handling.

Frequently asked questions