Diy Wedding Ring Holder: Creative Ways To Showcase Your Rings

There are many ways to make your own wedding ring holder, from using clay to woodworking. You can make a simple dish by rolling out clay, cutting it into a circle, pressing it with a vintage glass plate, and baking it. If you're looking for something more challenging, you can create a wooden box with a hinge and a faux leather interior. For a unique touch, you could turn a birch log, a toy animal, or even a vintage cigar box into a ring holder.

Using clay

Materials and Tools:

• Air-dry modelling clay or polymer clay (choose your preferred colour)
• Lotion (to prevent the clay from sticking to your hands)
• Rolling pin or a cylindrical object
• Jar or a circular cutter
• Pool ball or any spherical object (optional)
• Various tools for shaping/sculpting (e.g., toothpicks, dowels, X-acto knife)
• Paintbrush
• Paint (white, gold, and your choice of colours)
• Washi tape
• Gloss varnish

Instructions:

• Start by applying lotion to your hands to prevent the clay from sticking.
• Take a chunk of clay and knead it until it's soft and pliable.
• Use a rolling pin or a cylindrical object to flatten the clay into a sheet.
• Use a jar or a circular cutter to cut out a circle from the flattened clay.
• To create a concave bowl shape, place the clay circle on a spherical object such as a pool ball. Gently press the clay around the ball to form the desired shape. Alternatively, you can shape it by hand.
• For the ring holder, roll a piece of clay into a cone shape and cut the end flat so it stands upright. Smooth the surface with your fingers.
• Attach the cone to the centre of the clay dish by roughing up the bottom of the cone and the centre of the dish with a toothpick or dowel. Press the pieces together and smooth the edges.
• Let the clay ring holder dry overnight or follow the baking instructions on the clay package.
• Once dry, lightly sand the ring holder to achieve a smooth finish.
• Paint the ring holder with a base colour of your choice, such as white. You can also paint the bottom for an even finish.
• Decorate the ring holder with washi tape and paint. For example, paint the tip of the cone a solid colour and splatter gold paint around the bottom.
• Carefully remove the washi tape once the paint is dry. Touch up any areas as needed and let it dry.
• Apply a coat of gloss varnish to seal the paint and make it more durable. Let it dry thoroughly before using the ring holder.

Feel free to personalise your clay ring holder with colours and designs of your choice. You can also add gold leaf details or experiment with different clay colours and techniques. Enjoy creating your own unique wedding ring holder!

Making a box

Materials:

• TiteBond II Wood Glue
• Tung Oil
• Barrel Hinges (5mm)
• Sliding Compound Miter Saw
• Miter Saw Stand
• Thickness Planer
• Power Drill
• Sander
• Plunge Router
• Drill Bit Set
• Clutch Clamps
• Rafter Square
• Hand Saw
• Sanding Sponges
• Digital Measuring Caliper

Steps:

• Planning: Before starting, it is important to sketch out your design and plan the materials needed. This will help you visualize the final product and ensure you have all the necessary tools and supplies.
• Gathering Materials: For this project, you will need wood, preferably hardwood such as maple or IPE. You can use scrap pieces of wood or purchase new ones.
• Cutting and Gluing: Cut your chosen wood into strips of the desired length. Laminate and glue the strips together, leaving them to dry overnight.
• Planing: After the glue has dried, plane the laminated wood to the desired thickness, typically around 2/3 of an inch.
• Creating the Box Shape: Measure and cut the laminated wood to create the sides of the box. You can play around with the design, such as creating a corner with dark strips or varying the thickness of the sides.
• Gluing the Box: Rotate and glue the cut pieces together to form the box shape. Take your time with this step to ensure the pieces are aligned correctly and clamped securely. Let the glue dry overnight.
• Shaping and Sanding: Use a sander to flatten the sides of the box and create a smooth surface. Pay attention to the angles and ensure all sides are perpendicular to each other. Sand the surfaces with fine-grit sandpaper for a smooth finish.
• Creating the Lid: Carefully cut the box in half using a hand saw or a miter saw to create the lid and base of the box. Sand the cut edges to smooth them out and ensure a clean separation.
• Routing the Hole: Decide on the size and position of the hole for the ring. Create a simple jig to guide your plunge router in cutting the hole. Choose the appropriate router bit and mark the dimensions of the hole on the box.
• Finalizing the Hole: Follow the marked lines and dimensions to route and sand the hole. Take your time and make multiple passes to achieve the desired depth and smoothness.
• Adding Hinges: Install the barrel hinges to the box. Mark and drill pilot holes for the hinges, being careful not to drill too deep. Chamfer the back top edge of the bottom piece at a 45-degree angle to allow the hinges to open properly.
• Creating the Ring Pillow: Measure the width of the interior of the box. Cut and roll a piece of faux black leather or similar material to create a cylinder that fits snugly inside the box. Secure it with glue.
• Finishing Touches: Apply tung oil to the box to protect and enhance the wood. Insert the ring pillow into the box and use a pointed object to flatten it out neatly.

Your handmade wedding ring box is now ready to safely hold your ring and can be a cherished keepsake for years to come.

Using a vintage dish

Supplies:

• Sculpey clay in your choice of colour (white and black are popular options)
• Vintage pressed glass dish
• Wide mason jar ring lid
• Gold metallic acrylic paint
• Paintbrush with bristles
• Cutting board or another prepared surface

Instructions:

• Gather all your supplies.
• Open the clay and use 2-3 bars, depending on the size of your dish.
• Roll the clay into a ball and then flatten it with your hands to a thickness of about 1/4". Aim for a circular shape slightly larger than your mason jar lid.
• Use the jar lid to cut the clay into a perfect circle.
• Take your vintage glass dish and press the circular clay flat onto it. Apply pressure to ensure the pattern transfers to the entire clay surface.
• Carefully lift the glass and gently pull the clay away. If it breaks, simply roll it back into a ball and start again.
• Lay the pressed circle of clay in the smallest circle of the mason jar lid.
• Bend the clay into a natural bowl shape, distributing the curves to your liking.
• Place the jar lid with the clay onto a baking sheet and bake according to the Sculpey package instructions.
• Allow the dish to cool.
• Once cool, dip your dry paintbrush into the gold paint. Brush off some of the paint onto a scrap surface to avoid applying too much.
• Dry brush your ring bowl, adding more paint as needed.
• Let it dry, and your vintage-style ring holder is ready!

This DIY project is a lovely way to create a functional and meaningful piece for your wedding or as a gift for a loved one. Enjoy the process of crafting your own unique ring holder!

Creating a wall hanging

If you're looking to create a wall hanging wedding ring holder, there are a few different ways you can go about it. Here's a step-by-step guide to creating a beautiful and functional wall hanging to display your rings:

Materials:

• Wood slice or basswood carving block (approximately 7" x 3.5" x 1.75")
• Cup hooks or brass tubing
• Sharpies or paint pens in your choice of colour
• Martha Stewart Crafts gloss enamel spray paint
• Sandpaper
• Nails or screws
• Picture hanging hardware (such as D-rings and wire)

Steps:

• Start by sealing your wood slice or block with the gloss enamel spray paint. This will help to prevent the ink from bleeding into the wood if you're using Sharpies, and will create a smooth base if you're using paint. Be sure to follow the manufacturer's instructions for proper ventilation and drying time.
• If desired, sand the edges of your wood slice or block for a more polished look.
• Decide on a design for your wall hanging. You can download a free design or create your own using a font of your choice.
• Print out your design and cut it out. Then, shade the backside of the design with a pencil, leaving lots of graphite behind.
• Trace your design onto the wood block, creating a perfect pencil outline to colour in.
• Using your Sharpies, paint pens, or paint, fill in your design. If you're using a delicate font, you may need to use a fine-tip pen.
• Optional: if you want a different colour for the edges of your wall hanging, paint them with a brush or spray paint.
• To make adding the cup hook or brass tubing easier, make a nail hole first, then screw in your chosen hardware.
• Secure picture hanging hardware to the back of your wall hanging, such as D-rings and wire, to ensure it can be safely hung on the wall.
• Add your wedding rings and admire your handiwork!

Feel free to get creative and adapt this project to your own style and skill level. Happy crafting!

Using wood

Making a wooden wedding ring holder is a fun and creative project. Here is a step-by-step guide to crafting your own unique and personalised ring holder from wood:

Materials and Tools:

First, gather your supplies. You will need a block of wood, such as basswood, with dimensions of approximately 7" x 3.5" x 1.75". Additionally, you will require Sharpies in your preferred colours, craft paint and a paintbrush (optional), and gloss enamel spray paint to seal the wood. A cup hook, nail, and a hammer are also necessary.

Design and Decoration:

Start by sealing the wood block with a coat of gloss enamel spray paint. This step ensures that any ink or paint you apply later won't bleed into the wood. If you plan to use paint instead of Sharpies, you can skip this step.

Next, create your design. You can download and print a design template or get creative and design your own using a font of your choice. Once you have your design, shade the backside with a pencil, and then trace it onto the wood block. This transfer technique will leave a perfect pencil outline that you can colour in.

Use Sharpies, paint pens, or paint and a brush to fill in your design. If you're using a delicate font, opt for a fine-tip pen for better precision. You can also paint the sides of the block to match or complement your chosen design.

Adding the Cup Hook:

To make attaching the cup hook easier, first create a nail hole, and then screw in the cup hook. This will securely hold your wedding rings.

As an optional final step, you can further seal your design by applying another coat of gloss enamel spray. This will ensure your creation is long-lasting and protected.

And there you have it! A unique, handmade wooden wedding ring holder, perfect for displaying your most important piece of jewellery.

Frequently asked questions