Creative Diy Table Card Holders For Your Wedding Day

Wedding table card holders are a great way to add a personal touch to your big day. They can be as simple or creative as you like and are a fun DIY project. From wire loops to vintage books, there are many ways to display your table cards. You can even use natural items like leaves, fruit, or seashells, especially if they fit your wedding theme. With a little creativity, you can make unique and memorable table card holders without breaking the bank.

DIY clay table numbers

If you like baking or crafting with clay, making DIY clay table numbers for your wedding can be a fun project. Here's a step-by-step guide to help you create these unique wedding decorations:

Materials and Preparation:

• Gather your materials: You will need clay, a rolling pin, old cookie cutters, and toothpicks. You can choose a type of clay that suits your preferred style and colour scheme. Air-dry clay or polymer clay are good options and come in a variety of colours.
• Plan your design: Decide on the size and shape of your table numbers. You can use cookie cutters to create uniform shapes, or roll out the clay and cut it into rectangles or circles for a simpler design.
• Prepare your work area: Clear a clean, flat surface to work on. Have some water or acrylic glaze handy to smooth out any cracks or imperfections in the clay.

Creating the Table Numbers:

• Roll out the clay: Use the rolling pin to roll out the clay to your desired thickness. Aim for an even thickness throughout to ensure consistent drying and baking.
• Cut out the shapes: Use the cookie cutters or a knife to cut out the shapes for your table numbers. If you're making rectangular or square shapes, use a ruler to measure and mark the clay before cutting.
• Add the numbers: Use toothpicks to carefully inscribe the numbers onto the clay. You can also use small number-shaped cookie cutters to stamp out the numbers and attach them to the base.
• Personalise your design (optional): You can add additional decorations to your table numbers, such as small clay flowers, leaves, or other shapes. Get creative and make your design unique to your wedding theme.
• Let the clay dry: Follow the instructions for your chosen clay to allow adequate drying time. Air-dry clay will harden at room temperature, while polymer clay will need to be baked in an oven.
• Paint or decorate (optional): If you want to add colour to your table numbers, use acrylic paint to paint them. You can also leave them as-is for a more rustic look.
• Seal the clay (optional): Apply a clear sealant to protect your table numbers and give them a finished look.

Displaying the Table Numbers:

You can simply place your DIY clay table numbers on the reception tables, or you can attach them to small stands or easels to make them more visible. Add some extra decorations around the table numbers, such as greenery, flowers, or fairy lights, to complete the look.

Your DIY clay table numbers are now ready to guide your guests to their tables at your wedding reception!

Wooden table number holders

If you're looking for a simple, stylish, and inexpensive way to make wedding table card holders, wooden table number holders are a great option. Here's a step-by-step guide on how to create them:

Firstly, source some wooden blocks. These can be purchased from your local hardware store. Opt for blocks that are the desired height and width for your table card holders. You can also choose between different types of wood to match your wedding theme or venue, whether it's a rustic barn wedding or a modern elegant affair.

Once you have your wooden blocks, it's time to add the numbers. You can purchase adhesive numbers in your desired font and style, or you can get creative and paint the numbers onto the wood yourself. If you're feeling extra crafty, you can even try wood-burning the numbers onto the blocks for a unique, rustic look.

For a romantic touch, consider painting the wooden blocks a light pink or any other colour that fits your wedding colour palette. This adds a subtle pop of colour to your table décor. You can also decorate the wooden blocks with additional elements such as faux greenery or fairy lights. Drill small holes next to the slit where the table number card will go, and insert some eucalypti stems for a fresh look. Alternatively, wrap fairy lights around the wooden block to outline the number and add a warm ambiance to your wedding tables.

Finally, it's time to assemble your table card holders. If you're using wooden blocks, simply slot your table number cards into the slit at the top of the block. If you want to add stability, you can attach a small wooden dowel or clothespin to hold the card in place. And there you have it! Your wooden table number holders are now ready to guide your guests to their seats at your wedding reception.

Pom-pom DIY place card holders

If you're looking for a fun, colourful, and playful place card holder idea for your wedding, look no further than these Pom-pom DIY place card holders. They are simple to make, affordable, and can be easily customised to fit any wedding style or theme. Here's a step-by-step guide on how to create these whimsical creations:

Supplies You'll Need:

• Steel wire (19-gauge wire is recommended)
• Yarn or pom-pom balls in your choice of colours
• Something to roll the wire around, such as a pencil or paintbrush
• Wire cutters
• Pliers

Instructions:

• Cut your wire: Using wire cutters, cut the steel wire into strips of about 3-4 inches each.
• Create the wire loops: Take a strip of wire and use your hands to wrap it around a pencil or paintbrush handle to create a loop. You can also use pliers to help tighten the loop and create a neat circle.
• Secure the ends: Adjust the wire as needed and use pliers to tighten and secure the ends neatly.
• Remove the loop: Take the wire loop off the handle and use pliers to pull the long part down, straightening it as much as possible.
• Create a "foot": If your pom-pom is round or cannot stand on its own, you may need to create a "foot" by bending the wire into a triangle or square shape.
• Assemble the place card holder: Stick the straightened wire into the yarn pom-pom ball. You can use glue or a hot glue gun to secure it if needed.
• Add the place cards: Once the glue is dry, slide the paper cards with your guests' names into the wire loops.

And that's it! You now have adorable and whimsical Pom-pom DIY place card holders that will add a playful touch to your wedding tables. Feel free to experiment with different colours and sizes of pom-poms to match your wedding theme. You can also try using other materials like clay, wood, or special moulds for the base of the place card holders.

DIY fruit place card holders

For this DIY project, you will need photos of your guests, a paper cutter, and decorative scrapbook paper. First, print out small, black-and-white photos of your guests—you can easily find these on social media. Cut the photos into 1.5" x 1.5" squares, and then cut slightly larger squares (1.75" x 1.75") from the decorative scrapbook paper. Next, glue or tape the photos onto the centre of the decorative paper squares. Finally, use a straight pin to attach each photo to a piece of fruit.

If you want to add a little extra flair to your place card holders, you can create wire loops to insert into the fruit. To do this, cut a piece of steel wire into a 3-4 inch strip and wrap one end around a pencil or paintbrush handle to form a circle. Use pliers to tighten the loop and then remove the wire loop from the handle. You can then insert the straight end into the fruit and place the cards in the loop.

Your guests will love this creative and personalised touch, and it will make finding their seats a fun and unique experience.

DIY wire place card holders

Supplies:

• Steel wire (19 gauge wire is recommended, costing about $4 for a 50 ft roll)
• Wire cutters
• Pliers
• Something to roll the wire around, such as a pencil or paintbrush
• Place card holder bases (optional)

Instructions:

• Cut Your Wire: Using wire cutters, cut the steel wire into strips of about 3-4 inches each.
• Wrap the Wire: Take one of the wire strips and, using your hands, wrap it around the pencil or paintbrush handle to create a loop.
• Tighten the Loop: Use pliers to wrap the wire at least twice around the handle, tightening it into a neat loop. Adjust as needed and pinch the wrapped wire together.
• Remove the Loop: Take the wire loop off the handle and hold the pliers in the center. Pull the long part down to straighten it as much as possible.
• Create a Stand: If your base is round or unstable, create a "foot" by bending the wire into a triangle or square shape.
• Add Your Touch: Place the bent wire into something that matches your wedding theme. You can insert it into yarn pom-poms, fruit or vegetables, wine corks, clay, special molds, wood, or any other material that suits your style.
• Finalize: Slide your place cards into the wire loops.

With these simple steps, you can create unique and personalized DIY wire place card holders for your wedding. It's a fun and creative way to add special touches to your big day without breaking the bank!

Frequently asked questions