Crafting A Wedding Ring Toss Game: Diy Guide

Ring toss is a fun game that can be played at weddings, and it's easy to make your own. You can use recycled wine bottles, or clear soda bottles, and decorate them with paint. You'll also need to make some rings, which can be made from rope, wire, or PVC pipe. You can add your own creative flair to the design, making it as simple or as intricate as you like.

Use recycled wine bottles as targets

Using recycled wine bottles as targets for a wedding ring toss game is a fun and eco-friendly way to entertain your guests. Here's a guide to help you create this game for your special day:

Materials

You will need around six recycled wine bottles. These bottles can be of different shapes, sizes, and colors, adding a unique touch to your game. Ensure you remove any sharp edges for safety. You can also keep the old labels and stickers on the bottles for a rustic look.

Additionally, you will need some small rings. You can make these by cutting links of jute rope and joining the ends with hot glue. You can also wrap the rope with ribbon for a decorative touch.

Game Setup

Arrange the wine bottles on a low table or surface. Place them in an assorted pile, with the bottles touching and leaving little space between them. You can vary the difficulty by arranging the bottles in different ways. For instance, place them in a straight line or create a pyramid structure.

The throwing line should be approximately six feet from the center of the bottle arrangement. You can mark this distance with a piece of string or tape on the floor.

Game Rules

The objective of the game is simple: players must try to toss the rings onto the bottles. Each player gets a set number of throws or plays until they successfully land a ring on a bottle.

You can assign different challenges or tasks to each bottle. For example, the couple kisses if a player lands a ring on the center bottle, while landing on other bottles might result in the player having to perform a funny or embarrassing task.

Customization

If you want to add a personal touch, consider decorating the bottles with paint or ribbon to match your wedding theme. You can also place the bottles inside a rustic wooden crate, perhaps with "Ring Toss" painted on the side.

Safety

Remember to always supervise children playing the game and ensure they are a safe distance from the bottles to avoid any accidents.

With these tips, you can create a fun and memorable wedding ring toss game using recycled wine bottles as targets!

Create a folding ring toss game

A ring toss game is a fun addition to a wedding, especially as a lawn game! You can buy a ring toss game or make your own. Here's a guide on how to make a folding ring toss game for your wedding:

Materials and Tools

First, gather all the materials and tools you will need:

• One 4 ft. 1 x 4 in. board
• One 6 ft. x 1 in. dowel
• Power drill with a 1 1/2-in. drill bit
• Phillips-head screwdriver
• Sandpaper or a sanding sponge
• 1/2 in. 19-gauge nails
• Five 1 1/2-in. screws
• 14 ft. of 1-in. Manila twist rope
• Hot glue gun and glue

Cutting and Marking the Wood

Cut the 1 x 4 in. board into two pieces with a miter saw, one 2 feet long and the other 18 inches long. Save the offcut for later. Mark the center of both boards with a writing marker and then mark a point 1 1/2 inches from each end of both boards. For a nicer finish, you can also make dog-ear cuts to the wood.

Drilling

Drill through the center mark on the 18-in. board and then drill at the four remaining marks, stopping when the central point of the bit breaks through the other side. Sand all the surfaces and edges of the boards and slightly enlarge the hole that was drilled through.

Cutting and Installing the Dowels

Cut the dowel into five 12-inch pieces with the miter saw. Drill a pilot hole in the center of one end of each dowel. Place a dowel in every hole except the through hole and attach with a screw from the other side.

Attaching the Parts

Attach the feet with wood glue and nails to the ends of the 18-in. board. Slip the through hole over the center dowel on the 2 ft. board. When it's time to play, rotate the 18-in. board and let it slip down to touch the lower board. When playtime is over, lift the top board enough for the feet to clear so it can rotate to the closed position for easy storage.

Making the Rings

Make the rings from slices of PVC pipe or Manila twist rope. For PVC pipe rings, use a hacksaw to cut the pipe and sand the rough edges. Scuff the surface with sandpaper and paint the rings with spray paint that adheres to plastic. For rope rings, cut a 16-inch piece of rope for each ring, apply hot glue to the ends, and hold them together until the glue dries.

Now you have a fun and unique ring toss game for your wedding!

Make diamond-shaped rings

Making your own diamond-shaped rings for a ring toss game is a fun and creative project for your wedding. Here's a step-by-step guide to help you create these rings:

Materials:

• Wire (one piece per ring)
• Clear, empty glass bottles
• Spray paint (in your choice of colour)
• Sharpie (in your choice of colour)

Steps:

• Take a piece of wire and wrap it around a circular object a few times until your ring has a thickness of about three wires. Ensure you leave enough wire on one end to create your diamond shape.
• Create the diamond shape by bending the extra wire with your fingers. You can make one diamond silhouette or two crossing over each other for a 3D effect.
• Wrap the wire around the circular ring to secure the diamond shape. Cut off or wrap any excess wire.
• Paint your diamond rings with spray paint. You can choose any colour you like, such as gold or metallic.
• Allow the paint to dry completely before using a Sharpie to add details. You can write numbers on the rings or decorate them as you wish.
• Now you have your diamond-shaped rings ready for the ring toss game!

You can also paint and decorate the bottles you will be using for the ring toss game. Get creative and have fun with this DIY project!

Paint the bottles and rings

Painting the bottles and rings for your wedding ring toss game is a fun and simple process. Here's a step-by-step guide to help you get started:

Choosing the Bottles:

• You can use recycled wine bottles or empty sparkling cider bottles for your ring toss game. Make sure to have at least six bottles to create a fun and challenging game.
• When using recycled bottles, understand that they may vary in shape, size, and colour. Old labels and stickers may still be present, adding a unique touch to each bottle.

Preparing the Bottles:

• Gently remove any labels from the bottles to ensure they are completely bare.
• Clean the bottles with a rag and acetone to remove any residue or dirt. This step is essential to ensure the paint adheres well to the surface.

Painting the Bottles:

• Choose your paint colours. For a wedding theme, you can opt for metallic gold or colours that match your wedding palette. You can also go with traditional wedding colours like white and gold or something more playful like red, white, and blue.
• Mix equal parts of your chosen paint colour with water in a plastic cup. You can use acrylic paint for this step.
• Pour the diluted paint into the bottle and spin the bottle around to completely cover the inside. You may need to do multiple coats, depending on the opacity you desire.
• Allow the paint to dry completely before adding a second coat or moving on to the next step.

Creating the Rings:

• For the rings, you can use jute twine, rope, plastic costume jewellery bracelets, paper plates with the centre cut out, or even glow stick bracelets.
• Cut the jute rope or other chosen material into links long enough to easily fit over the bottlenecks when made into rings.
• Apply a generous amount of glue to one end of the cut rope and press the ends firmly together until the glue dries completely.
• Once dry, apply glue to the outside of the attached ends and attach a ribbon if desired. This adds a decorative touch and can be used to differentiate teams or players.

Now you have your painted bottles and rings ready for your wedding ring toss game! Feel free to get creative with your colour choices and decorations to match your wedding theme.

Use rope to make the rings

Using rope is a great way to make the rings for your wedding ring toss game. Here's a step-by-step guide to creating them:

Materials:

• Rope: You'll need a 16-inch piece of 1-inch Manila twist rope or similar for each ring.
• Hot glue gun and glue: This will be used to join the ends of the rope.
• Scissors: Ensure they are heavy-duty and sharp to cut through the rope easily.
• Wooden beads (optional): These should have a 3/8-inch hole and can be painted or stained to match your wedding theme.
• E6000 glue or super glue (optional): If you're using wooden beads, this type of glue can provide extra strength.

Instructions:

• Cut the Rope: For each ring, cut a 15- to 16-inch piece of rope. Ensure the ends are cut squarely.
• Form the Ring: Bend the rope into a circle. Apply hot glue to each end of the rope and hold them together until the glue dries. If you're using wooden beads, add a small amount of glue inside one end of the bead, then insert one end of the rope, holding it in place until it dries.
• Decorate the Rings: If you're using wooden beads, paint or stain them before attaching them to the rope. You can decorate the rope rings as well. Try wrapping them with coloured string or ribbon to add a pop of colour or a rustic touch.
• Safety: Ensure the rings are not too small to pose a choking hazard, especially if children will be present at the wedding.

Your rope rings are now ready for your wedding ring toss game! They are a simple, cost-effective, and customisable option that will add a unique touch to your special day.

Frequently asked questions