Junior Rasmussen
A wedding ring that doesn't fit properly can be a common issue for many people. While resizing is an option, it's not always ideal, especially if the ring is a family heirloom or has a special engraving. There are several temporary and semi-permanent solutions to make a ring fit tighter without resizing. These include using sizing beads, fold-over devices, ring snuggies, spring inserts, food-grade silicone, or clear nail polish. Each of these methods has its own pros and cons, and some may be more suitable for certain types of rings or personal preferences. For example, those with sensory issues may prefer a different method to sizing beads, and those with large knuckles may benefit from a spring insert. Ultimately, the best solution depends on individual needs and preferences.
| Characteristics | Values |
|---|---|
| Ring spinning | A common issue, often caused by a large diamond and an uneven ring setting. |
| Ring slipping | Rings that are too large might come off and get lost, or slip sideways. |
| Ring comfort | Wearing a ring should not cause any discomfort. |
| Ring resizing | A professional jeweller can typically alter rings by a maximum of two sizes. |
| Ring resizing beads | Small metal beads soldered onto the bottom of the inner ring shank. |
| Ring resizing bar | A small metal bar soldered to the bottom of the ring, also known as a fold-over device. |
| Ring snuggie | A piece of silicon wedged between the finger and the ring. |
| Spring insert | A U-shaped, thin, flexible bar that goes across the bottom of the ring, often made of white gold. |
| Hinged shank | A hinge that opens at the side of the ring, useful for those with arthritis or pain in their fingers. |
| Soldering rings together | A permanent solution to keep two rings together. |
| Ring adjuster | A small spiral made of clear plastic that fits around the band of a ring to create a snug fit. |
Sizing beads
If you are considering sizing beads, it is recommended to consult a professional jeweller. They will be able to advise you on the best solution for your ring and perform the necessary work to add or remove sizing beads.
Creating a Simple, Elegant Wedding Cake: A Step-by-Step Guide
You may want to see also
Fold-over device
A fold-over device is a small metal bar soldered to the bottom of the ring to make it fit properly. It is a comfortable and easy fix for a jeweller to perform.
A fold-over device is also known as a sizing bar. It is a U-shaped bar that goes across the bottom of the ring, with a hinge on one side and a latch on the other. To put the ring on, you simply open the latch and swing it shut to hold it in place. This method can resize a ring several full ring sizes smaller.
A fold-over device is a good option for those who don't like the idea of squeezing their finger through a ring to get it past the knuckle. It is also a good option for those who want to avoid resizing, as resizing can weaken the metal of the ring.
If you are considering a fold-over device, ask your jeweller if they have a sample ring to try out.
Artificial Wedding Flowers: Create Your Own Bouquet
You may want to see also
Ring Snuggie
Customer reviews of Ring Snuggies are mixed. Some customers find them accurate and secure, while others say they don't fit wider rings or are too wide to wear comfortably. Some customers also report that the plastic quality is poor and that the product feels bulky and uncomfortable. However, others find Ring Snuggies comfortable and easy to use, with no discomfort.
Creating a Wedding Card Envelope: DIY Guide
You may want to see also
Spring insert
A spring insert is a U-shaped or horseshoe-shaped strip of metal that lines the bottom 3/4 of the inside of your ring band. It is a semi-permanent solution for those who have larger knuckles and can be a great alternative to resizing your ring.
The insert pushes down as you place the ring over your knuckle and springs back to fit snugly at the base of your finger. This method is a little more complicated for a jeweller to execute than sizing beads but is still an affordable choice. It is also more comfortable for the wearer than sizing beads.
Creating a Rustic Cupcake Stand for Your Wedding
You may want to see also
Food-grade silicone
To resize your ring with food-grade silicone, start by cleaning the inside of the ring with rubbing alcohol. This will ensure the silicone adheres properly. You can use a small applicator, such as a popsicle stick, to apply the silicone to the inside of the ring. Smear a thin layer of silicone to the inside of the ring, opposite the setting, and apply a small portion to the sides as well. Smooth the adhesive over the shank to make it even, and use a paper towel to gently wipe off any adhesive that gets on the outer layer. Leave the silicone to cure and dry; this usually takes around 24 hours. If you need to, you can always add an extra layer of silicone if the ring is still too loose.
Crafting Wedding Decorations: A Guide to Making Your Own
You may want to see also
Frequently asked questions
There are several temporary methods to make a ring tighter without resizing. You can use a flexible ring adjuster, a small spiral made of clear plastic, to create a snug fit. You can also use a fold-over device, a small metal bar soldered to the bottom of the ring, or sizing beads, two small metal balls soldered onto the bottom of the inner ring shank.
Spring inserts are U-shaped, thin, flexible bars that go across the bottom of the ring and are a good option for those with larger knuckles. You can also add more wedding bands to your ring to increase the width of the band, making the ring tighter. Soldering the rings together is also an option, but it is a permanent and pricey solution.
Finger sizes fluctuate depending on the time of day, what you eat, and other factors, so it is important to get your ring resized at the right time. Many professional jewelers offer free ring resizing services for the first year, so you can take advantage of that if your ring doesn't fit well. However, resizing a ring too many times can weaken the metal band.
