Creating Ribbon Bows To Decorate Your Wedding Car

Decorating a wedding car with ribbon is a fun and creative way to make a couple's big day more memorable. There are many ways to do this, from the classic V-shape ribbon design to giant door bows, ribbons on car handles and side mirrors, and even sun visors and roof ribbons. When choosing your ribbon, it's important to consider the colour palette and wedding theme, as well as the weather conditions to ensure the ribbons are secure and won't get damaged. With a bit of creativity and some careful planning, you can make a grand entrance on your wedding day with a beautifully decorated wedding car.

Classic V-shaped ribbon design

The classic V-shaped ribbon design is a great way to add a unique flair to your wedding car. This style is eye-catching and sophisticated, and will definitely make your bridal car stand out!

To achieve this look, you'll need some wide ribbon, preferably 5cm or 3.8cm wide, and about two meters long. This will ensure that the ribbon fits securely from the grill to the mirror of your car. Magnetic tape is also recommended for attachment, as it won't damage the paintwork.

Here's a step-by-step guide to creating the classic V-shaped ribbon design:

• Secure one end of two pieces of fabric ribbon to the hood latch.
• Pull them back in a diagonal direction until they form a V shape.
• Roll their ends around the front windows or tie each ribbon around the rearview mirrors.
• Ensure that the ribbons are tight and taut to prevent obstruction of the driver's view.

This classic design will add a touch of personality and elegance to your wedding car, making it a memorable part of your special day!

Giant door bow decoration

Giant door bows are a great way to create a bold and festive entrance to your home, especially during the holidays. You can make your own giant door bow using the following steps:

Materials:

• Roll of cloth ribbon, 2 inches or wider
• Floral wire or other bendable wire
• Wire cutters (optional)

Instructions:

• Cut a wide ribbon 1 inch longer than the width you want for your door bow. For example, cut a 25-inch ribbon for a 12-inch wide bow.
• Fold each end of the ribbon to the middle and overlap the ends by 1/2 inch.
• Wrap floral wire twice around the middle of the ribbon to secure it into two loops. Twist the wire a few times and clip off the excess, or twist until it breaks off.
• Cut a piece of ribbon for the bow's streamers. Make the streamers at least 50% longer than the bow's width. For a one-foot-wide door bow, cut a 36-inch-long piece of ribbon and cut it in half at a 45-degree angle to give each streamer a classic point.
• Take a 4- to 5-inch piece of floral wire and wrap one end of it three times around the top of each streamer, about 1/2 inch from the straight-cut end. Gather the ribbon in the loop of wire to secure it. Twist the short end of the wire around the other end of the wire next to the gathered ribbon three times.
• Wrap the loose end of each wire around the middle of the big bow's loop to attach the streamers.
• Cut a 4- to 6-inch piece of ribbon to make the loop at the middle of the bow. The thicker the ribbon, the longer the loop needs to be. Set this piece good-side down on your work surface.
• Centre the bow's loops on this short strip of ribbon with the streamers facing down. Fold each end of the short piece of ribbon over the middle of the bow's loops and overlap the ends to cover the wires and create the centre of the bow.
• Fold an 8-inch piece of wire in half and wrap it around the overlapped ends of the short piece of ribbon four times, then twist it around itself. Make a hanging loop with the free end of the double wire.

Tips:

• Go green by choosing reusable fabric instead of plastic ribbon.
• Store your bow in a box to prevent creases or donate it when you're done.
• You can also purchase ready-made giant door bows online from retailers like Etsy and Kmart.

Car handle and side mirror ribbons

To attach the ribbons, start by securing one end of the ribbon around the car's sun visor or handle. Draw it out to the front and attach the other end to the hood latch. Pull the ribbon back diagonally to form a V-shape towards the rearview mirrors and tie it securely near the radiator grille or within the bonnet. This will create a beautiful bow that adds a special touch to the door handles and side mirrors.

You can also add extra flair by incorporating flowers, balloons, or other creative accents. Just make sure to use adhesive tape or magnetic strips to attach these additional decorations.

Remember to keep the ribbons tight and taut to avoid obstructing other drivers on the road. With these tips, you can create exquisite and safe wedding car decorations!

Car window ribbon streamers

To create this look, cut ribbons that are 2-3 inches wide into different sizes, ranging from 3 to 8 feet long. Hang these streamers from the rear bumper so they flutter behind the car as you drive off.

To attach the ribbons securely, cut them to size and hang them over the edge of the open window. Then, roll up the window, trapping a bit of ribbon inside the roll. This will hold the ribbons in place as you drive away.

You can also personalise your window ribbons with your wedding colour scheme or include personal messages, such as the date of your wedding or your initials.

Personalising your wedding car ribbon

Choose the Right Ribbon

The type of ribbon you choose for your wedding car will depend on the overall theme and colour palette of your wedding. Consider selecting ribbons that complement your chosen colours and theme. Satin, grosgrain, or organza ribbons are popular choices due to their long-lasting quality and soft feel, which helps prevent any damage to the car's paintwork. The size of the ribbon will also depend on the look you want to achieve, with options ranging from 1.5 inches (38 mm) to 25 inches (635 mm) in width. Don't forget to take the weather into account and opt for waterproof materials like vinyl or polyester if you're having an outdoor wedding.

Add Personalised Details

Customised ribbons with printed designs are a great way to add a unique touch to your wedding car. You can include your names, initials, wedding date, or even decorative elements like flowers and bows that match your theme. These personalised ribbons are sure to grab the attention of your guests and make your car stand out.

Classic V-Shape Ribbon Design

One classic way to decorate your wedding car is by creating a V-shape with the ribbons. Secure one end of two pieces of fabric ribbon to the hood latch, pulling them back diagonally to form a V. Then, roll the ends around the front windows or tie them to the rearview mirrors. This look adds a touch of personality and sophistication to your bridal ride.

Giant Door Bow

For a statement decoration, consider adding a giant flower door bow to your wedding car. Choose a bow that matches your wedding colours and theme, with popular options being white, ivory, silver, or shades of purple. Ensure the bow is securely attached to the door using strong adhesive or double-sided tape suitable for outdoor conditions.

Car Handle and Side Mirror Ribbons

Tying ribbons around the car handles and side mirrors is a sophisticated way to decorate your wedding car. Secure one end of the ribbon to the car's sun visor or handle, draw it out to the front, and attach the other end to the hood latch. Pull the ends back diagonally to form a V towards the rearview mirrors and tie them securely. This creates beautiful bows that add extra flair to your car.

Window Ribbon Streamers

To make your big day feel extra festive, hang colourful ribbon streamers from the car windows. Cut ribbons that are 2-3 inches wide into different sizes ranging from 3 to 8 feet long. Hang these streamers from the rear bumper or open windows, allowing them to flutter behind as you drive off.

Remember to have fun with your wedding car ribbon and be creative! Just ensure that your decorations are secure and do not obstruct the driver's view or compromise safety.

Frequently asked questions