Creating Wedding Car Pull Bows: A Step-By-Step Guide

Decorating a wedding car with a bow is a fun and creative way to celebrate a special day. You can make your own pull bow with florist ribbon, or buy a ready-made bow with ribbon to decorate your car. This is a simple task that can add a festive and celebratory touch to your wedding car. With a few materials and a bit of creativity, you can create a beautiful bow that matches your wedding colour scheme.

Using florist ribbon

Step-by-step guide to making pull bows for wedding cars with florist ribbon

Pull bows are a great way to decorate a wedding car and can be easily made with florist ribbon. Here is a step-by-step guide on how to create them:

Gather your materials:

You will need florist ribbon in your desired colour, a pair of scissors, and some wire or string. The amount of ribbon needed will depend on the size of your car and how many bows you want to make. As a reference, a typical wedding car decoration kit includes 6 to 10 pull bows and 18 to 50 metres of ribbon.

Cut the ribbon:

Cut the florist ribbon into strips of equal length. The length of each strip will depend on the size of the bow you want to create. For small bows, cut the ribbon into 30-centimetre strips, and for large bows, cut the ribbon into 50-centimetre strips. You will need multiple strips of ribbon for each bow.

Create the loops:

Take one strip of ribbon and form a loop in the centre. Then, take another strip and form a smaller loop in front of the first one. Continue adding loops in this way, alternating the sizes, until you have used all your strips. Make sure the loops are evenly spaced and aligned in the centre.

Secure the centre:

Once you have created all the loops, you need to secure the centre. You can do this by using wire or string to tie the loops together tightly. Alternatively, some pull bows come with pre-cut strips that you can pull to form the bow. If your kit includes these strips, simply hold the bow between your thumb and forefinger and slowly pull both strips at the same time until the bow tightens. Then, tie the strips in a knot to keep the bow in place.

Fluff and arrange the loops:

Gently fluff and arrange the loops to create a full and symmetrical bow. Make sure all the loops are even and there are no gaps. You can also curl the ends of the ribbon for a more elegant look.

Attach the bows to the car:

Finally, use the remaining ribbon to tie the bows to the wedding car. You can attach them to the car doors, rearview mirrors, or anywhere else you desire. Be careful not to cover the license plate or block the driver's view.

Tips and Tricks:

• When choosing the colour of your florist ribbon, consider the wedding colour scheme or theme. You can also mix and match different colours to create a unique look.
• If your ribbon is folded and creased, use a cool iron without steam to remove the wrinkles before tying it to the car.
• If you are attaching the bows to a moving car, make sure they are secured tightly to prevent them from blowing away.
• For a more durable option, choose a weather-resistant material such as plastic or polyester ribbon.
• For added decoration, you can combine the bows with other wedding car accessories such as streamers, tulle, or flower garlands.

Classic design: 15 petals, plastic ring, long ribbon

Pull bows are a great way to decorate wedding cars and are easy to make. The classic design with 15 petals, a plastic ring, and a long ribbon is a simple, elegant choice. Here is a step-by-step guide to creating this beautiful bow:

Firstly, you will need to gather your materials. For this classic design, you will need a long ribbon, preferably made from poly satin or a similar material, which is around 15 inches in length. A plastic ring will also be needed, which can be sourced from a local craft store.

To begin, lay the ribbon out flat on a table or another surface. You should now see two tail ribbons; lift one of them to reveal the narrower pull cords underneath. Take the two narrow pull cords and run them through your fingers, pulling gently. You will feel the bow start to gather against your hand. Continue this process until the entire ribbon has been gathered into a bow.

Now that you have a formed bow, simply tie off the two pull cords to secure it and prevent any unravelling. You can then adjust the ribbon tails to create the desired look, spreading them out to your preferred style.

Finally, attach the plastic ring to the centre of the bow. This will help maintain the shape and make it easier to attach to the wedding car. You can use a hot glue gun or a strong adhesive to secure the ring in place. And there you have it—a classic pull bow, ready to be used as a beautiful decoration for a wedding car!

Assemble: pull inner ribbon, paste, roll, store

To assemble the pull bow, first, pull the thin inner ribbon. This will start to form the bow shape. Next, paste the tabs of the inner ribbon onto the area you want to decorate. You can stick it onto the car or gift, or you could stick it onto another surface first if you want to prepare the bow in advance. Once you have affixed the bow, you can roll out the remaining ribbon to create a decorative effect. The ribbon is 20 feet long, so there should be plenty to work with. If you want to remove the bow, simply roll it back up and store it for next time.

Decorative effect: big bow, long ribbon

To create a decorative effect with a big bow and long ribbon, you can follow these steps:

Firstly, source a ribbon in your choice of colour and length. Florist ribbon is a good option, and you can opt for a classic colour or mix and match to fit a specific wedding colour scheme. You will also need a sharp pair of scissors and, optionally, some curling ribbon or a twist tie.

Once you have your ribbon, follow these steps:

• Take the ribbon and form a loop at the centre, leaving a tail at the end.
• Cross the working end over the loop to create an "X" shape.
• Pull the working end behind the loop and bring it forward again, creating a second loop.
• Pull the working end through the centre of the "X" and tighten the knot.
• Adjust the loops to the desired size and fluff out the ribbon to create a full bow.
• Use the sharp scissors to cut the ribbon at an angle to your desired length.
• Optionally, use the curling ribbon or twist tie to add extra decoration or secure the bow to the car.

With this method, you can create a beautiful, decorative effect with a big bow and long ribbon, perfect for a wedding car.

Bow diameter: 50 cm or 62.5 cm

If you're looking to make a pull bow for a wedding car, you can purchase a ready-made bow with a ribbon that you can use to decorate the car. These bows are available in two sizes: 50 cm (20 inches) and 62.5 cm (25 inches). The ribbon included is approximately 6 m/20 feet in length, which should be enough for your decoration needs.

To assemble the bow, simply pull the thin inner ribbon plastic tabs and paste it on the car where you want to add a decorative touch. If you need to remove the bow, you can carefully roll it back up and store it for next use. The bow is made of polypropylene material, which is waterproof and durable, making it suitable for both indoor and outdoor use. The classic design of the bow, composed of 15 pieces of petals linked by a plastic ring, will surely catch people's eyes and make your wedding car more attractive.

Frequently asked questions