Creative Paper Balls: A Diy Guide For Weddings

Tissue paper pom-poms are a popular choice for wedding decorations. They are easy to make, affordable, and can be customised to fit any colour scheme. You can make them in different sizes and hang them in various places, such as over the cake, the dance floor, or on the walls and ceiling. This guide will take you through the steps to make your own paper pom-poms for your wedding.

Tissue paper pom-poms

To make tissue paper pom-poms, you will need tissue paper, scissors, ribbon or string, and something to secure the centre of the pom-pom, such as a paper clip or floral wire.

First, stack 8 pieces of tissue paper and make 1 1/2 inch wide accordion folds, creasing each fold. Then, secure the centre with your chosen material and trim the ends of the tissue paper into rounded or pointy shapes. Next, separate the layers, pulling away from the centre one at a time. Finally, hang your pom-pom or use it as a napkin ring!

You can also buy pre-made tissue paper pom-poms that are easy to assemble and come in a variety of colours and sizes. These can be a great option if you are short on time or don't want to deal with the hassle of making them yourself.

Paper flower pomanders

Materials:

• Styrofoam balls (4" balls are recommended)
• Pins (you will need a lot of these, approximately 1000 pins for 8 balls)
• Paper flowers in your choice of colour and size (pre-made mulberry paper flowers are a good option, or you can cut your own flowers using a Silhouette machine or a handheld punch)
• Ribbon or twine for hanging
• Hot glue gun
• Wire cutters or pliers
• Screw eye (optional)

Steps:

• Cut your paper into strips of the desired size for your flowers.
• Stack 4 pieces of paper and fold them into an accordion. The folds should be about 1/2" wide.
• Wrap floral wire or a paper clip around the centre of the folded paper and twist the ends to secure.
• Round the edges of the folded paper with scissors.
• Fan out the paper and separate the layers to create a flower shape.
• Repeat steps 1-5 to create as many flowers as needed.
• Insert a wire hook or screw eye into the top of the styrofoam ball. Secure it with hot glue.
• Start adding the paper flowers to the styrofoam ball by poking the wire stem into the ball. Add a dab of hot glue to each flower for extra security.
• Nestle the flowers close together to eliminate gaps and give the pomander a full appearance.
• Continue adding flowers until the entire ball is covered.
• Attach a ribbon or twine to the wire hook or screw eye for hanging.
• Adjust and fluff the flowers as needed to create the desired shape.

Honeycomb paper balls

Materials:

• Tissue paper in your chosen colours
• Scrap paper
• Washi tape or low-tack tape
• Coloured markers
• Plate or bowl
• Strong tapestry needle and thread
• Paper clips
• Glue

Steps:

• Fold and cut your tissue paper. For an 8-inch honeycomb ball, you will need 50 sheets of tissue paper. Fold and cut the paper in half until you have eight even pieces.
• Prepare your guide by taking a piece of scrap paper larger than your tissue paper and dividing it into even sections. For a dense honeycomb, make 1-inch sections, and alternate the colours of the lines to make it easier.
• Tape your guide to your work surface and secure a sheet of tissue paper on top using washi tape.
• Choose a colour and trace your glue stick along the lines, holding the tissue paper down to prevent tearing. Repeat this for all lines of the same colour.
• Place another sheet of tissue paper on top and press down.
• Repeat the gluing process on the lines of the other colour, layering and alternating colours with each new sheet. You can change the tissue paper colour halfway through for a striped design.
• Continue layering and gluing until you have a stack of 50 sheets of tissue paper.
• Cut a semi-circle out of cardboard, lining it up with the edge of your tissue paper stack, and draw around it. Cut out all your sheets along this line.
• Cut two arches out of cardboard by drawing and cutting around a plate, then placing a smaller bowl inside and cutting around it. Fold and cut these in half to create semi-circles.
• Glue the cardboard arches to each side of your tissue paper sheets.
• Poke a hole through the top and bottom of your tissue paper/cardboard stack using a needle.
• Thread some cotton through the holes and tie a loose knot, leaving some slack to allow the ball to open.
• Fan open your honeycomb ball. You can use a paper clip or rolled tape to keep it open if you want to store it flat, or glue the arches to keep it permanently open.
• Hang your honeycomb paper balls and enjoy!

You can also get creative with different shapes and colours, such as strawberries, pineapples, balloons, or shamrocks. They are a fun and versatile addition to any wedding décor!

Napkin rings

Paper Napkin Rings:

Following the same concept as the paper balls, you can create beautiful napkin rings using paper. This idea is simple, cost-effective, and allows you to choose a fun print that complements your wedding table. You will need:

• Scrapbook paper or any decorative paper of your choice
• Tape
• Scissors
• Ruler (optional)

First, measure the circumference of your rolled-up napkins and cut the paper to an appropriate length to wrap around them. Cut the paper evenly so that all your napkin rings match. You can secure the paper rings with a small piece of tape. This idea is not only budget-friendly but also convenient, as you can dispose of the paper rings after use without needing to store them.

Toilet Paper Tube Napkin Rings:

Toilet paper tubes provide a great base for creating napkin rings. You will need:

• Empty toilet paper tubes
• Ruler
• Tape measure
• Scissors
• Ribbon (grosgrain ribbon in different widths and colours, or any other type of ribbon you prefer)
• Silk flower embellishments
• Double-sided tape or glue gun

Start by measuring and cutting the toilet paper tubes to your desired width. Then, measure the diameter of the tubes and cut the ribbon accordingly, adding a little extra length for adjustments. You can use double-sided tape or a glue gun to attach the ribbon to the tubes. Cover any seams or imperfections with the silk flower embellishments. Finally, fold your paper napkin and insert it into the toilet paper tube napkin ring.

Kraft Paper Napkin Rings:

Kraft paper is a natural material that can be used to create elegant and whimsical napkin rings. You will need:

• Kraft paper
• Gel Art Ink or stencil paint
• Scissors or a paper cutter
• Painter's tape or Scotch tape
• Stencils (optional)

First, choose your napkins and roll one up. Measure the circumference to determine the length of the kraft paper needed to wrap around the napkin. Then, measure and cut the kraft paper accordingly. If using stencils, centre them on the kraft paper and secure them with tape. Apply the Gel Art Ink or stencil paint, and gently remove the stencils. Let the ink dry, and place the napkin rings on your rolled-up napkins, securing them with Scotch tape.

Wire Napkin Rings:

Wire napkin rings are versatile and can seamlessly complement any table decor. You will need:

• Wire (gold, copper, or silver)
• Wire cutters
• Pliers

Purchase wire from a hardware store and use wire cutters and pliers to create loops of the appropriate size to fit around your rolled-up napkins. You can leave the wire as-is or paint it with metallic spray paint for a more polished look.

Leather Napkin Rings:

Leather napkin rings are simple, durable, and perfect for a minimalist or casual wedding table setting. You will need:

• Leather
• Scissors or a craft knife
• Leather glue or a glue gun

Cut the leather into strips of the appropriate length to wrap around your rolled-up napkins. Secure the ends of the leather strips with leather glue or a glue gun. These napkin rings can be reused and will add a rustic, elegant touch to your wedding tablescape.

Vase filler

Paper flower balls are a great, inexpensive DIY option for wedding decorations and can be used in many ways. They can be placed in a vase or planter, hung at a wedding reception, or even combined to make a wreath.

To make paper flower balls, you will need regular-weight coloured paper, such as coloured printer paper, and some glue. Tissue paper can also be used, but keep in mind that it tears more easily. You will also need some thread or ribbon for hanging, and optionally, some pearls for the centre of the flowers.

First, cut your paper into squares. You can choose whatever size you want, but make sure they are all the same size for each flower. Fold the squares in half to form a triangle, then fold each end into the middle to create a rectangle. Unfold one side and fold it diagonally, then fold your triangle inside and then back out again. Repeat this procedure on the other side of the flower, then glue the two sides together. This will form one leaf of your flower. Repeat this process until you have five leaves, then glue them all together. You can glue a pearl into the centre of the flower to add depth and decoration.

To make a flower ball, create six flowers in any colour or combination of colours. Make two flower balls, then glue them together with the thread or ribbon in the centre for hanging.

For a different type of paper ball, you can also try decoupaging paper napkins onto plastic baseballs or golf balls. Cut strips of decorative paper napkins and spread a thin coat of Mod Podge onto part of the ball. Pick up a strip of napkin and press it onto the ball, then repeat until the ball is covered. Set it aside to dry, then cover the entire ball with another thin coat of Mod Podge to seal it.

Frequently asked questions