Crafting A Wedding Money Sash: A Guide To Making Yours

A money dance is a wedding tradition in which the couple dances in the middle of the guests, who pin money to the couple's dress. A money sash is a way to present your gift all at once. To make a money sash, you'll need a roll of ribbon (2-3 inches wide), paper bills, double-sided tape or hot glue, plastic wrappers, and cardstock. Cut two 1.5-metre-long pieces of ribbon and stick them together to make a wider strip. Cut short strips of ribbon, pleat them, and secure them to both sides with double-sided tape or glue to create ruffles. Insert the paper bills into plastic wrappers, secure with tape, and stick them to the centre of the ribbon. Attach the ends of the ribbon with hot glue, and if there are extra bills, fold them into a cone shape and secure with tape. Cut two circles from the cardstock, glue the cone-shaped bills around one, and then glue this into the centre of the sash. Cut a label from the remaining cardstock and stick it in the middle of the money circle.

Choosing and preparing the materials

The materials you will need to make a money sash for a wedding include:

• 1 roll of ribbon (2-3 inches wide)
• 10-20 paper bills
• Double-sided tape or hot glue
• Plastic wrappers
• Transparent tape
• Cardstock
• Scissors
• A small paintbrush
• A paper plate
• Glue (E6000 is recommended)

Begin by cutting out two 1.5-metre long pieces of ribbon. You can use any colour ribbon you like, but make sure it complements the wedding colour scheme. If you want a wider sash, stick the ribbons together using double-sided tape or hot glue.

Next, cut short strips of ribbon and pleat them to make ruffles on both sides of the sash. Secure these with more double-sided tape or hot glue.

To prepare the money, insert the paper bills into plastic wrappers and secure both ends with transparent tape. You can also fold any extra bills into cones and secure them with tape.

Now it's time to assemble the sash. Carefully apply the wrapped money to the centre of the ribbon, using double-sided tape for a neat finish. If you have any cones, glue them onto a cardstock circle, then glue this piece into the sash.

Finally, cut the ends of the ribbon at an angle and attach both ends using hot glue. Your money sash is now ready for the wedding!

Cutting and sticking the ribbons

Firstly, you will need to cut out two pieces of ribbon, each measuring 1.5 metres in length. This will form the basis of your money sash. It is recommended to use a ribbon that is 2-3 inches wide, and you can find these ribbons at craft stores or online.

Now, take your chosen adhesive and apply it to the ribbons. You can use double-sided tape or hot glue, whichever you find easier to work with. Stick the ribbons together, ensuring they are aligned properly, to create a wider base for your money sash. This will provide a sturdy foundation for attaching the paper bills.

Next, cut short strips of ribbon and pleat them to create ruffles. These ruffles will add a decorative touch to your money sash. Secure these pleated strips on both sides of the ribbon using your chosen adhesive. This will give your sash a three-dimensional look and feel.

At this point, you can insert the paper bills into plastic wrappers and secure both ends with transparent tape. This step is important to protect the money and ensure it stays in place.

Now, it's time to attach the paper bills to the ribbon. Use double-sided tape to stick them one by one in the centre of the ribbon. This will give you a neater finish than using transparent tape. Space out the bills evenly along the length of the ribbon, creating a stylish money sash.

Finally, attach both ends of the ribbon using hot glue to form a loop that can be worn around the waist. And there you have it! A beautiful and functional money sash for the wedding, ready to be used during the money dance tradition.

Feel free to add extra decorations or personal touches to your money sash to make it even more special for the happy couple.

Preparing the paper bills

You will need 10-20 pieces of paper money for your money sash.

First, insert the paper bills into plastic wrappers and secure both ends with transparent tape.

Next, cut out two 1.5-metre-long ribbons and stick them together using double-sided tape or hot glue to make it wider.

Now, cut short strips of ribbon and pleat them to make ruffles on both sides. Secure these with more double-sided tape or hot glue.

Then, stick the wrapped paper bills one by one in the middle of the ribbon, using double-sided tape for a neat finish.

If you have any extra bills, fold them into a cone shape and secure with tape. Take a piece of cardstock and cut out a circle. Glue the cone-shaped bills around the circle, then glue this into the sash.

Finally, cut out another circle from cardstock and write a label. Stick the label in the centre of the money circle.

Attaching the paper bills to the ribbon

Now that you have your paper bills and ribbons ready, it's time to assemble your money sash! Here is a step-by-step guide to attaching the paper bills to the ribbon:

• Insert each paper bill into a plastic wrapper and secure both ends with transparent tape. This step is important to keep the money clean and protected.
• Decide on the placement of your paper bills along the ribbon. You can space them out evenly or cluster them together—it's up to your preference.
• Using double-sided tape, carefully stick each wrapped bill to the centre of the ribbon. The tape will give you a neater finish than transparent tape.
• If you have any extra bills, fold them into cones and secure them with tape. These can be used as additional decorations on the sash.
• Cut out two circles from cardstock. One will be used as a base, and the other will be for the label.
• Glue the cone-shaped bills around the edge of one of the cardstock circles. Then, glue this piece onto the sash, creating an eye-catching focal point.
• On the second cardstock circle, write the label. You can personalise it with the bride and groom's names or a special message.
• Stick the label in the centre of the money circle. This will add a special touch to your money sash.
• Finally, attach both ends of the ribbon using hot glue. This will ensure that the sash stays securely in place during the wedding festivities.

By following these steps, you will create a beautiful and functional money sash that is ready for the wedding celebration. It is a unique and thoughtful way to gift money to the happy couple and will surely be appreciated by all.

Adding a label

Step 1: Cut out two circles from cardstock

Using cardstock, cut out two circles that are the same size. These circles will be used to create the base for your label. You can choose any colour of cardstock that matches your wedding theme or the colour of your money sash.

Step 2: Create the label

On one of the cardstock circles, write the label for your money sash. You can use a black pen or any other colour that stands out. Be creative and choose a font or style that reflects your personality and the theme of your wedding. You can write something like "Bride" or "Groom" or even the couple's names.

Step 3: Assemble the label

Glue the edges of the two cardstock circles together, sandwiching the ribbon between them. This will give your label a sturdy base and ensure that it stays in place. Make sure the label is centred on the ribbon for a polished look.

Step 4: Add extra embellishments (optional)

If you want to make your label even more special, you can add some extra embellishments. Consider using rhinestones, glitter, or small flowers to decorate the edges of the circle. You can also attach a small ribbon or string to the top of the label, allowing it to hang down elegantly. Get creative and use any materials that complement your wedding theme.

Step 5: Allow the glue to dry

Before wearing your money sash, make sure that the glue is completely dry. This will ensure that all the elements of your sash, including the label, stay securely in place during your wedding celebrations.

By following these steps, you will have a beautiful and personalised money sash for your wedding, complete with a unique label. It's a fun and creative project that will add a special touch to your big day.

Frequently asked questions