Crafting Delicate Flower Bracelets For Your Wedding Day

Flower bracelets are a cheap and chic alternative to a traditional bouquet for your bridesmaids, and they can double as a memento of your special day. You can make your own floral bracelet with flowers of your choice, wire, ribbon, floral tape, and glue. First, measure the wire to fit across your wrist, leaving 2cm of extra space. Cut off any excess wire. Next, attach the ribbon to the wire by wrapping floral tape around it. Then, add your flowers by wrapping the floral tape around their stems and the wire. Continue adding flowers until your bracelet is full but not overflowing. Finally, tie the bracelet onto your wrist, ensuring that the ribbon is long enough.

Choosing flowers and materials

The type of flowers and materials you choose for your wedding flower bracelet are important considerations. You want to select flowers that are not only aesthetically pleasing but also durable and easy to work with. Here are some guidelines to help you choose the right flowers and materials:

When selecting flowers for your bracelet, it is best to avoid flowers that are too big, as they may make the bracelet cumbersome and difficult to assemble. Smaller flowers or flower buds are ideal, such as baby's breath (gypsophila), limonium, or bouvardia. These flowers provide a delicate and elegant look while being easy to work with. You can also use spray roses, as suggested by Huckleberry Karen Designs, for a romantic and versatile floral bracelet.

In addition to the flowers, you will need some basic materials and equipment. Here is a list of what you will need:

• Floral wire: Choose a thin and flexible wire that can be easily bent and shaped. Aluminum floral wire in gauge 12 is a good option and can be found at most craft stores.
• Ribbon: Select a ribbon that complements the colour of your flowers and wedding outfit. Satin or a similar material is ideal as it is smooth and easy to work with.
• Floral adhesive or floral tape: These will be used to secure the flowers to the bracelet. Floral adhesive (glue) provides a strong hold, while floral tape is easier to work with and can be wrapped around the wire and stems.
• Shears or wire cutters: These will be needed to cut the wire to the appropriate length. Scissors can also be used if you don't have shears or wire cutters.
• Cardstock: Cut two pieces of cardstock into 1" diameter circles. These will be used as a base for your flowers.
• Foliage (optional): You can add some greenery to your bracelet by using foliage like dusty miller.

Once you have gathered all the necessary materials, you can start assembling your flower bracelet. Remember to choose flowers that complement your wedding colour palette and theme, creating a cohesive and stylish look for your special day.

Preparing the wire

The first step in making a flower bracelet is to prepare the wire. This will form the base of your bracelet and ensure a comfortable fit.

Start by measuring the wire. You'll want it to fit comfortably across your wrist, so take a measuring tape and wrap it around your wrist. Make a note of this measurement and add on an extra 2cm to ensure a comfortable fit. This extra length will also be useful once you start adding flowers. It's important to remember that the wire will only pass over the top of your wrist, the ribbon will wrap around the rest, so don't cut enough wire to fit your whole wrist.

Now, cut the wire to the correct length. You can use wire cutters or, if your wire isn't too thick, a pair of sharp scissors. Once you've cut the wire to size, put the offcuts to one side – you could use them to make another bracelet!

Next, you'll be attaching the ribbon to the wire. Take your ribbon and place the wire in the middle, ensuring you have an equal amount of ribbon on either side. Secure the ribbon to the wire by gently wrapping floral tape around it. This will keep everything in place and provide a secure base for your flowers.

Now that your wire is prepared, you're ready to start adding flowers and bringing your bracelet to life!

Attaching the ribbon

Step 1: Prepare the Wire:

Before attaching the ribbon, you need to prepare the wire that will form the base of your flower bracelet. Measure the wire around your wrist, leaving an extra 2 cm to ensure comfort. Cut the wire to this length, being careful not to make it too long, as it will only pass over the top of your wrist.

Step 2: Position the Ribbon:

Take your satin or similar material ribbon and place the wire in the middle of it. Ensure that you have an equal amount of ribbon on both sides of the wire. This will create a symmetrical look and provide a sturdy base for your bracelet.

Step 3: Secure the Ribbon:

Using floral tape, gently wrap it around the wire and ribbon. This step will secure the ribbon in place and ensure that your flowers remain attached once added. Floral tape is a delicate and flexible type of adhesive tape designed specifically for floral arrangements.

Step 4: Add Floral Embellishments:

Now it's time to add some flowers! Start by attaching a few flower stems (such as limonium) close to the wire and ribbon. Secure them by wrapping floral tape around the stems and the wire. This will create a base for your floral arrangement and help guide the placement of the rest of the flowers.

Step 5: Continue Building Your Floral Design:

Add more flowers, such as spray roses or bouvardia, continuing the same pattern of wrapping floral tape around the stems and wire. Allow the flowers to overlap slightly to create a full and elegant look without overcrowding the bracelet. You may need to adjust the placement of the flowers to achieve a balanced design.

Step 6: Finalise the Ribbon:

Once you're happy with your floral arrangement, cut off the end of the floral tape and carefully tie the ribbon around your wrist. Ensure that the ribbon is long enough to comfortably tie a knot or bow. If you're making this bracelet for a special occasion, try it on to ensure a perfect fit and to check that the ribbon is long enough.

Creating a flower bracelet for a wedding requires time and attention to detail. By carefully attaching the ribbon and building your floral design, you can achieve a beautiful and elegant accessory that will perfectly complement your wedding outfit.

Adding flowers

Now it's time to add some flowers to your bracelet! You can use any flowers you like, but it's best to avoid flowers that are too big, as this can make the bracelet difficult to put together and maintain. Some recommended flowers include baby's breath (gypsophila) and limonium stems.

Start by placing your chosen flowers as close as possible to the wire and ribbon. Attach them by wrapping floral tape around the stems and the wire to secure them. You can also use floral adhesive to glue the flowers in place, especially if you are using a corsage bracelet with a silicon pad or aluminium tabs.

When adding more flowers, continue the same pattern and method, spreading the flowers around and overlapping them slightly to create a full but not overflowing look. You may need to swap ends at some point to avoid the bracelet looking crowded.

If you are using a cardstock base for your flowers, as in the Huckleberry Karen Designs tutorial, glue your chosen foliage and flowers to the cardstock with floral adhesive before gluing the cardstock to the bracelet.

Securing the bracelet

Attaching the Ribbon to the Wire

Place the wire in the centre of the ribbon, leaving an equal amount of ribbon on either side. Use floral tape to gently wrap around the wire, securing the ribbon in place. This step ensures that the flowers will be securely attached to the bracelet later.

Adding Flowers

Start by placing your chosen flowers as close as possible to the wire and ribbon at one end. Secure them by wrapping floral tape around the stems and the wire. Continue adding flowers, wrapping the tape around each addition to keep them in place. Allow the flowers to overlap slightly to create a full and cohesive look.

Tying the Bracelet

Once you have finished adding flowers, cut off the end of the floral tape and prepare to tie the bracelet onto your wrist. This step ensures that the bracelet fits comfortably and securely. It is a good idea to test the bracelet on your wrist to ensure it feels secure and there is enough ribbon for a comfortable fit.

Using Floral Adhesive

For an even more secure bracelet, consider using floral adhesive. First, remove any excess ribbon, leaving enough to fasten the acrylic square to the bracelet. Use a sharp pair of scissors to snip off any excess. Then, fold over any aluminium tabs on the bracelet before gluing the flowers in place. This will ensure that the flowers are securely attached and won't come loose during wear.

Final Adjustments

Finally, place the bracelet around your wrist and gently bend it to ensure a comfortable and secure fit. This step ensures that the bracelet won't be too tight or too loose and that it will stay in place throughout the wedding day.

By following these steps, you can ensure that your flower bracelet is securely fastened and will stay in place, adding a beautiful and elegant touch to your wedding attire.

Frequently asked questions