Creative Diy Guide: Burlap Wedding Cones

If you're looking for a simple DIY project for your wedding, why not try making your own burlap wedding cones? All you'll need is some burlap fabric, a few basic craft supplies, and a little bit of time. You can use these cones as pew decorations, goody bags, or even as a unique way to display your wedding flowers. In this tutorial, we'll walk you through the step-by-step process of creating these rustic cones, which can add a charming touch to your special day. So, gather your materials and let's get started!

Cut the burlap into 1ft by 1ft squares

To make burlap wedding cones, you'll want to start by cutting the burlap into 1ft by 1ft squares. This will give you the material from which the cones will be formed. It's a good idea to iron the burlap flat before you begin cutting to ensure you get neat, even squares.

When cutting the burlap, use a sharp pair of scissors or a rotary cutter for accuracy and to prevent fraying. You can also fold the burlap to cut multiple squares at once, saving time and effort. If you're using a patterned burlap, pay attention to the pattern placement to ensure it's centred or aligned according to your preference.

Cutting the burlap into 1ft by 1ft squares will give you a good amount of material to work with. From here, you can trace a circular pattern, which will form the base of your cones. You can use a plate or bowl as a guide for tracing, ensuring each circle is the same size. It's important to leave a margin of at least 0.5 inches between the edge of the circle and the edge of the burlap square to allow for sewing and to prevent the cone from becoming too small.

Once you've cut out your squares and traced the circles, you're ready to move on to the next step of assembling your burlap wedding cones.

Trace a circle on the burlap

To make burlap wedding cones, you'll need to start by tracing a circle on the burlap. This will serve as the base pattern for your cones. Here's a step-by-step guide to help you through the process:

Firstly, gather your materials. You will need a plate or bowl that is roughly the size you want your cones to be. A paper plate works well, but any plate or bowl with a circular shape will do. You will also need something to draw with—a marker or pen that shows up on the burlap.

Next, lay your plate or bowl on the burlap and carefully trace around the edge to create a circle. Ensure that your plate or bowl is centred on the burlap, especially if you are working with limited fabric. You want to make sure you have enough fabric to cut out the entire circle without running into the edges of the fabric.

When tracing, try to maintain a steady hand to create a smooth circle. It doesn't have to be perfect, but the more precise you are, the neater your cones will look. Leave at least 0.5 inches (1.3 cm) between the edge of the plate/bowl and the edge of the burlap to allow for a seam allowance.

If you're feeling creative, you can use a coloured pen or marker that complements the colour of your burlap. For example, if you're using a natural-coloured burlap, a yellow or orange marker will show up well and add a touch of fun to your project.

Once you've traced your circle, carefully cut it out. You can now use this as a template to trace and cut out additional circles from your burlap. Repeat this process until you have enough circles for all your cones.

Now that you've mastered the art of tracing and cutting perfect circles, you're well on your way to becoming a burlap wedding cone pro!

Sew the burlap

Now that you have your burlap cut into squares and ironed out, it's time to start sewing! Here's a step-by-step guide:

• Using a paper plate, trace a circular pattern on the burlap squares. Make sure to leave at least 0.5 inches between the drawn circle and the edge of the burlap. You can use a different colour to make the line more visible.
• Set up your sewing machine to do a zig-zag stitch, which is a basic stitch that almost every machine will have. Adjust the settings so that the stitches are closer together for a tighter hold. Burlap has a loose weave, so a tighter zig-zag stitch will help it hold together better. Don't forget to do reverse stitching at the start and end to prevent the stitches from unraveling.
• Sew along the traced line. Remember to leave a hole, about 0.5 inches in diameter, unsewn, so you can turn the square right side out.
• After sewing, trim the excess burlap, turning the square into a circle. Try to leave no more than 0.5 inches of excess fabric on the edges to ensure it lays flat when turned right side out.
• Turn the burlap circle right side out through the hole. Iron the circle again to help the edges lay flat.
• Pin the hole closed as neatly as possible. You can use the edge of the sewing foot as a guide to keep the edge of the cone straight.
• Sew the hole closed by hand or using your machine, keeping the edge close to the edge of the sewing foot.
• You can choose to sew around the entire cone to make it more uniform, or you can stop after closing the hole. It's a matter of personal preference, so you may want to try both methods to see which one you like better.
• Roll the burlap circle into a cone shape and pin it in place. You can secure the cone shape by hand-stitching a few quick stitches, as it might be difficult to use the machine at this point.

And that's it! Your burlap wedding cone is now sewn and ready for further decoration or filling.

Trim excess fabric

Trimming the excess fabric

Now that you have sewn your burlap squares together, it's time to trim the excess fabric to create a circular shape. This step will ensure that your cone has a neat and tidy appearance.

Using scissors, carefully trim away the excess burlap fabric, leaving approximately 1/2 inch (1 cm) of fabric extending beyond the sewn circle. This will allow the cone to lay flat when it is turned right side out. Be cautious not to cut too close to the stitching, as this may cause the fabric to unravel.

If you accidentally forget to leave an opening, don't worry! Simply cut a small hole close to the circle you sewed. You can patch the hole later or start over with a new square if needed.

Once you have trimmed the excess fabric, your burlap circle is almost ready to be transformed into a cone. At this stage, it should resemble a whoopee cushion! The next step is to pin the hole closed and sew it shut, ensuring that the edge of the cone is aligned with the edge of the sewing foot for a precise finish.

Now, you have a hanging circle with a closed hole. The final step in preparing the fabric is to fold over one side and then the other, creating a small opening at the bottom, and ensuring the jute hanger is at the top. Pin this in place, ready for hand stitching.

Roll the burlap into a cone

Now that you have your burlap fabric cut into circles, it's time to roll them into cones. This process will involve some careful pinning and sewing to ensure that the cone shape is maintained. Here is a step-by-step guide:

Step 1: Rolling the Burlap Circle

Start by taking your burlap circle and placing it on a flat surface. Fold one side of the circle towards the centre, and then bring the other side over, creating a cone shape with a small opening at the bottom. Ensure that the jute hanger remains at the top. This step may require some adjustment to get the desired cone shape.

Step 2: Pinning the Cone

Once you are happy with the cone shape, use pins to secure the overlapping fabric in place temporarily. Place the pins along the curved edge of the cone, starting at the bottom on the underside and working your way up. This will help you achieve a neat finish when you sew the cone together.

Step 3: Hand Sewing the Cone

Now, it's time to hand stitch the cone together. Using a needle and thread, start at the bottom on the underside of the cone and sew along the curved edge. Try to keep your stitches small and close together to create a strong bond. Continue sewing until you reach the top of the cone, and then tie off the thread securely.

Step 4: Final Touches

Give your cone a light press with an iron to ensure that the seams lay flat and the cone holds its shape. Now, your burlap wedding cone is almost complete! All that's left to do is to add any desired embellishments, such as ribbons, bows, or flowers, to decorate your cone.

Remember, you can always add a personal touch to your cones by experimenting with different fabrics, colours, and decorations. Feel free to get creative and make your cones unique to your wedding theme!

Frequently asked questions