Creative Diy Wedding Selfie Frame Ideas For Your Big Day

A wedding selfie frame is a fun way to entertain your guests and create lasting memories. You can buy a personalised selfie frame or make your own with a large piece of card and some creative flair. If you're feeling crafty, here's what you'll need: a foam board, a utility knife or scissors, something to protect your work surface, and optional decorations like vinyl decal wording, fake flowers, paint, or a marker pen. Protect your surface, mark out the frame, cut it out carefully, smooth the edges, and get creative with your chosen decorations. You can also add a fun twist with playful photo booth props, like cardboard cutouts, personalised wedding props, or a fancy dress box.

Use foam board to cut out your frame

To make a wedding selfie frame using a foam board, you'll need to cut out a hole for people to stand in when taking photos. Here's a step-by-step guide to help you cut out the frame using foam board:

Protect Your Work Surface

Place something flat and sturdy like a cardboard box or a cutting mat underneath your foam board to protect the surface underneath from any potential damage.

Mark Out the Frame

Before cutting, use a pencil and a ruler to mark out where you want the hole in your frame to be. If you're using a vinyl decal, place it on the board first to ensure you've left enough space around it. You can also use a Polaroid picture as inspiration for the size and shape of your frame.

Cut the Outline

Carefully use a utility knife or a sharp craft knife to cut along the pencil lines. If you don't have a knife, you can also use scissors, but be very careful and take your time. Make sure the blade is new and sharp to achieve cleaner cuts.

Push Out the Middle

Once you've cut along the entire pencilled rectangle, carefully push out the middle section. You may need to go over the lines a few times if the foam board doesn't come out easily.

Straighten and Smooth the Edges

Use your knife or scissors to straighten out any uneven edges. Then, use sandpaper to lightly sand the edges that you've just cut to make them as smooth and straight as possible.

Paint the Frame (Optional)

At this point, you can choose to paint your foam board a different colour if you wish. Spray paint or acrylic paint works best for this purpose. Allow the paint to dry completely before proceeding to the next step.

By following these steps, you'll be able to cut out a neat and presentable frame from your foam board, providing a fun and memorable photo opportunity for your wedding guests!

Protect the surface underneath with cardboard

Protecting the surface underneath your wedding selfie frame is an important step in the process of making one. This is because it ensures that your work area is not damaged by any cuts or marks. A flattened cardboard box is a great option for protecting the surface underneath. Before you begin cutting the board, place the cardboard on your work surface. This will provide a barrier between your tools and the surface, preventing any accidental damage.

Cardboard is an ideal material for this purpose, as it is sturdy enough to withstand the pressure of cutting and will also catch any stray marks or spills. It is also easily replaceable if it becomes too damaged. Using cardboard means you can cut with confidence, knowing that your work surface is protected.

Additionally, cardboard is readily available and can be sourced from recycled materials, making it an environmentally friendly option. It is also lightweight and easy to transport, so you can set up your frame-making station almost anywhere.

By taking the time to protect your work surface, you can focus on creating a beautiful and unique wedding selfie frame without worrying about any accidental damage to tables or other surfaces. This simple step will make the process less stressful and more enjoyable, allowing you to fully embrace the creativity of the project.

Decorate your frame with vinyl decals, flowers, or paint

There are many ways to decorate your wedding selfie frame using vinyl decals, flowers, or paint. Here are some ideas to get you started:

Vinyl Decals

Vinyl decals are a versatile and easy way to decorate your wedding selfie frame. They can be used to create patterns, labels, or even works of art. With a variety of decal types, sizes, and designs available, you can find the perfect one to match your wedding theme and style. For example, opt for classic vinyl decals with a die-cut design or go for vinyl stickers and sticker sets to create your own patterns. Transfer tape decals, on the other hand, are perfect for applying wall words and transparent designs.

Flowers

If you want to add a touch of nature to your wedding selfie frame, consider using flowers. You can choose to press your own flowers or use pre-pressed ones. Look for fine, delicate flowers such as butterfly ranunculus, hellebores, nigella, clematis, or delphiniums as they tend to press well. Once you have your flowers, lightly press them into blotting paper and leave them to dry for 2-4 weeks. Then, apply a light coat of glue to the back of the flowers and stick them onto your frame.

Paint

Painting your wedding selfie frame is a simple and inexpensive way to change up its look. You can use a variety of paints, including acrylic, latex, alkyd (synthetic) oil paint, or natural (e.g. linseed) oil paint. If you're painting a wooden frame, start by removing the existing paint or finish with sandpaper. Then, apply a coat of primer to ensure better adhesion and brighter colors. For metal frames, clean the frame with a grease-cutting dish detergent and lightly abrade the surface with sandpaper before painting.

Add a personalised message with a marker pen

Adding a personalised message with a marker pen is a great way to make your wedding selfie frame unique. You can write your message directly on the frame, customising it with your choice of font and wording. Whether you're looking to add a touch of humour or a heartfelt sentiment, a marker pen allows you to get creative and make your frame truly yours.

When adding your message, consider the placement. You can put the wording at the top and bottom of the frame, just the bottom, or even up the sides—it's entirely up to you! If you're feeling extra creative, you can even decorate the frame with additional fake or paper flowers, fairy lights, or other decorations to complement your message.

If you want to include a hashtag for your wedding, the marker pen is a perfect way to do so. This will encourage guests to use the hashtag when posting their photos on social media, making it easier for everyone to find and share memories from your special day.

When choosing a marker pen, opt for a type that will write smoothly and clearly on your frame material. You may want to test it out on a small area first to ensure it looks the way you want. Additionally, consider the colour of the marker pen. A black or dark-coloured marker will typically show up well on a light-coloured frame, while a light-coloured marker can be effective on a darker frame.

Remember to take your time and carefully write out your message, as you may not be able to erase any mistakes. Adding a personalised message with a marker pen is a simple yet effective way to customise your wedding selfie frame and make it a fun and memorable part of your celebration.

Include fairy lights or other decorations

Adding fairy lights or other decorations to your wedding selfie frame is a great way to enhance its visual appeal and make it more fun for your guests. Here are some ideas to get you started:

Fairy Lights:

• Fairy lights come in various colours, from warm white to multicoloured, and different lengths to suit your frame size. Choose a colour and length that complements your wedding theme and provides the desired amount of illumination.
• For a simple and elegant look, wrap fairy lights around the border of your frame. Ensure the lights are secured with tape or glue, and hide any excess wiring.
• If you want a more whimsical effect, intertwine the fairy lights with artificial flowers or greenery. This combination adds texture and creates a romantic atmosphere.
• For a unique touch, opt for fairy lights with replaceable batteries. This feature ensures consistent illumination throughout your wedding, and you can avoid the hassle of dealing with power outlets or extension cords.
• Consider using fairy lights with decorative elements attached to the string, such as stars, hearts, or even miniature lanterns. These decorative accents can enhance the overall visual appeal of your frame.

Other Decorations:

• Artificial flowers, whether paper or fabric, can add a touch of elegance and colour to your frame. Attach them along the border or let them cascade from the top for a more whimsical look.
• If you're feeling creative, use paint to decorate your frame. You can paint directly on the frame or create a design on a separate sheet of paper or cardboard and attach it to the frame.
• Bows, ribbons, and streamers can also be used to embellish your frame. Choose colours that complement your wedding theme, and attach them at the corners or along the border for a festive touch.
• For a more natural look, especially if your wedding has an outdoor or rustic theme, consider using twigs, branches, or dried flowers as decorations. Attach them securely to the frame, perhaps intertwining them with fairy lights for a magical effect.

Frequently asked questions