Deborah Chan
Wedding rings are often a significant investment, so it's important to get the right fit. A ring that fits well should go on the finger easily but come off with a bit of difficulty. If your ring is too loose, you risk losing it, and if it's too tight, it can be uncomfortable and hard to remove. There are several ways to make a ring smaller, some of which can be done at home, but it's always best to consult a professional jeweller to avoid damaging your ring.
Sizing beads
Some wearers find sizing beads uncomfortable, so it is worth asking your jeweller if they have an example ring with sizing beads to try on before committing.
Creating a Unique Wedding Guest Book with Shadow Boxes
You may want to see also
Fold-over device
A fold-over device is a simple and effective way to make a ring fit better, and it is especially useful if you have a large knuckle that makes it difficult to get the ring on and off. This device is a small metal bar, or a U-shaped bar, that a jeweller solders to the bottom of the ring to make it tighter. It has a hinge on one side and a latch on the other, which can be opened to put the ring on and then closed to hold it in place. This method can resize a ring by several full sizes and is reported to be comfortable.
A fold-over device is a good option if you don't want to have to squeeze your finger through the ring to get it past your knuckle. It is also a good alternative to sizing beads, which some people find uncomfortable. Sizing beads are small metal balls that are soldered onto the bottom of the inner ring shank to make the ring smaller. However, unlike sizing beads, a fold-over device does not require any cutting of the metal, which minimises damage to the ring.
If you are considering a fold-over device, ask your jeweller if they have a sample ring with one attached that you can try on.
There are also plastic ring size adjusters that you can buy and attach yourself, but these are not as durable as metal fold-over devices and may not last as long.
Creating a Wedding Guest List: Strategies for Success
You may want to see also
Ring Snuggie
To use Ring Snuggies, simply choose the size that best fits your ring and finger. If you need to, you can cut the Ring Snuggie to make it smaller. Then, hook the Ring Snuggie onto the back of your ring. You can also use Ring Snuggies to join two rings together on one finger for a unique look.
Keep in mind that some customers have mentioned that Ring Snuggies can feel uncomfortable and bulky. They may also fall off, especially when touching them or washing your hands. However, with a range of sizes available, Ring Snuggies can be a good temporary solution to make your wedding ring tighter without the need for resizing.
Creating a Fondant Ruffle Wedding Cake: A Step-by-Step Guide
You may want to see also
Spring insert
A spring insert is a simple and effective way to make a ring tighter. It is a small, horseshoe-shaped piece of metal that lines the bottom 3/4 of the inside of your ring band. The insert is designed to spring open slightly to allow the ring to pass over your knuckle, and then spring back to fit snugly at the base of your finger. This method can make a ring up to one full ring size smaller.
When choosing a spring insert, it is important to select one made from a suitable material. Metal spring inserts are a good option as they are durable and can be soldered onto the ring by a jeweller, ensuring a secure fit. Plastic or silicone spring inserts are also available, which can be purchased online and fitted at home. However, these may not last as long as metal inserts and could negatively impact the aesthetics of your ring.
If you are considering a spring insert to resize your wedding ring, it is recommended to consult a professional jeweller. They will be able to advise on the best type of insert for your ring and ensure it is fitted correctly.
Creating a Wedding Registry: The Ultimate Guide for Couples
You may want to see also
Food-grade silicone
Firstly, clean the inside of your ring with rubbing alcohol. This will ensure the silicone adheres properly. Next, get a small applicator, such as a popsicle stick, and apply the food-grade silicone adhesive to the inside of the ring. Focus on the bottom part of the ring, applying the thickest amount of silicone here. Smooth the silicone with the applicator to ensure an even finish, and wipe away any excess with a paper towel.
Now, you simply need to let the silicone cure and dry. This usually takes 24-48 hours, so be sure to leave enough time for this step. Once the silicone is fully cured, it will feel dry and appear transparent. If you start wearing the ring before this stage, the silicone may come off after a few days. If you need to, you can always add an extra coat of adhesive if the ring is still too loose.
Creating Sweet Trees for Weddings: A Step-by-Step Guide
You may want to see also
Frequently asked questions
If you can easily slide your ring off your finger without much force, it's likely too big. If your skin is bulging out of the top or bottom of the ring, or you feel pain or tingling, it's also too big.
You can use a piece of yarn, string, or medical tape to wrap around the base of the ring until you get the desired tightness. You can also use a silicone ring sizer, which is a cheap and quick option.
You can add sizing beads or a spring insert to the inside of your ring. Sizing beads are small metal balls that are soldered to the bottom of the ring, while a spring insert is a strip of metal in the shape of a horseshoe that lines the inside of the band.
If you don't want to resize your ring, you can try using a ring guard or a silicone insert. A ring guard is a metal sleeve that fits over your existing ring and can be adjusted to make it tighter. A silicone insert is placed inside the band to make it tighter against your finger.
Before resizing your ring, consider the circumstances under which it was first fitted. For example, if you were pregnant or ate a high-salt meal before the fitting, this could have temporarily affected your finger size. It's also important to note that each resize weakens the metal, so it's best to avoid resizing multiple times.
