Creating A Cake Pop Stand For A Wedding

Cake pops are a fun addition to any wedding, but displaying them can be a challenge. You can purchase cake pop stands, but they are often plain or expensive. Making your own cake pop stand is a great way to ensure your dessert table looks exactly how you want it to. There are many creative ways to make a DIY cake pop stand, from using foam blocks to terra cotta pots to wooden boards. With a little creativity and some basic materials, you can create a stand that is both functional and stylish.

Using a wooden board

Materials and Tools:

• Wooden board (approximately 1" x 12")
• Wooden beads (optional)
• Wooden candlestick (4.5" - 10")
• Wooden plaques in various sizes (one large round plaque for the top, and smaller ones for stacking)
• Wood glue
• Paint or wood stain
• Paintbrushes
• Sandpaper
• Ruler
• Drill and drill bits
• Measuring tape

Instructions:

• Cut the wooden board to your desired size and shape. You can make it into a rectangle or any other shape that fits your wedding theme.
• Sand the wooden pieces to smooth out any rough edges. Use sandpaper to sand the pieces, and remember to wipe off any grit with a clean cloth afterward.
• Stack the wooden plaques and candlestick to create the desired height and structure for your stand. Use a ruler to draw circles on the pieces to help you line them up accurately.
• Apply wood glue to attach the pieces together. Glue the largest wooden plaque to the base, then glue the candlestick on top, followed by the smaller plaques.
• If you want to add a decorative touch, you can string wooden beads onto a wire and wrap them around the bottom edge of the candlestick. Apply wood glue to secure the beads in place.
• Drill holes into the wooden board to hold the cake pops. Space the holes about 1.5 inches apart, or adjust the spacing as needed to fit your cake pops comfortably.
• Paint or stain your cake pop stand. You can use white craft paint or choose a color that matches your wedding theme. Apply at least two coats of paint, allowing sufficient drying time between coats.
• Let the paint dry completely, and your wooden wedding cake pop stand is ready!

Feel free to add your own creative touches, such as using stencils or distressing techniques, to make your stand unique and memorable.

Making a tiered stand

Materials and Tools:

• Wooden board (around 1" x 12")
• Saw
• Drill
• Sandpaper
• Paint and paintbrushes
• Measuring tape
• Lollipop or cake pop sticks

Instructions:

• Cut the wooden board to your desired size and shape. For a tiered stand, you may want to cut it into a rectangle or a circle.
• Draw a grid on the board to plan out the placement of your cake pops. Space the rows about 3 inches apart, and the vertical holes about 1.5 inches apart.
• Using a drill bit that matches the size of your cake pop sticks, drill holes at each marked point. Make sure the holes are deep enough to hold the sticks securely, about 1/4" to 1/2" deep.
• Sand the board to smooth out any rough edges and remove splinters.
• Paint the stand with your chosen colour. You may need multiple coats for full coverage.
• Let the paint dry completely before assembling your cake pops and placing them on the stand.

Tips:

• You can decorate your stand further with ribbons, flowers, or other embellishments to match your wedding theme.
• If you want a taller stand, consider making it tiered by attaching smaller boards or plates at different levels.
• Always measure your cake pops and plan the spacing accordingly to ensure they fit comfortably on the stand.
• If you're short on time, consider purchasing a pre-made stand and decorating it to match your wedding theme.

Making a wedding cake pop stand can be a fun DIY project, and with some creativity, it can be a beautiful addition to your special day.

Using floral foam

Step 1: Gather Your Materials

You will need a floral foam ring, double-sided cardstock, a marker, and a small circle punch. You can find these materials at most craft stores.

Step 2: Prepare the Floral Foam

Start by painting the floral foam ring. This will be the base of your stand. You can use any colour paint you like, but it's a good idea to choose something that will complement the colours of your wedding.

Step 3: Cut the Cardstock

Use the small circle punch to make holes in the centre of each round piece of cardstock. This will allow you to thread the cardstock through the wires of the floral foam ring.

Step 4: Assemble the Stand

Thread the cardstock through the wires of the floral foam ring, creating a soft base for the cake pops to plunge into. You can vary the height of the cardstock to create a visually appealing display.

Step 5: Add the Cake Pops

Once your stand is assembled, it's time to add the cake pops! Simply plunge the sticks of the cake pops into the floral foam, and your display is ready to go!

Tips:

• If you want to add extra stability to your stand, you can place it in a box or basket.
• To make your stand even more festive, consider decorating it with ribbon, craft paper, or other wedding-themed embellishments.
• If you're looking for a more natural look, you can use a wooden cake pop stand with curved sides and sturdy legs.
• For a fun twist, try making an emoji cake pop stand by using a smooth foam block, ribbon, straight pins, decorative paper, and hot glue.

Styrofoam and streamers

Materials:

• Styrofoam: You will need a few pieces of Styrofoam in different sizes. Go for Styrofoam rounds or blocks, which can be found in craft stores or the cake department of some stores. You can also get creative and cut your own shapes from a large block of Styrofoam.
• Streamers: Choose streamers in colours that match your wedding theme. You can opt for simple, solid colours or go for patterned or glittery streamers for added glamour.
• Other essentials: You will also need a hot glue gun, scissors, and a sharp knife or a dowel cutter for cutting the Styrofoam.

Instructions:

• Plan your design: Before you start, decide on the overall design and layout of your cake pop stand. Consider the number of tiers you want, the height, and the placement of the streamers.
• Cut and assemble the Styrofoam: Cut the Styrofoam into the desired shapes and sizes for the tiers of your stand. You can have a simple one-tier design or go for a more elaborate multi-tiered stand. Use a hot glue gun to attach the tiers securely.
• Decorate with streamers: Cut the streamers into desired lengths, depending on how you want them to drape or hang from the stand. Use the hot glue gun to attach the streamers to the edges of the Styrofoam tiers. You can also wrap the streamers around the tiers for a different look.
• Add cake pops: Once your stand is assembled and decorated, it's time to add the cake pops! Place the cake pops onto the tiers, making sure they are secure and won't topple over.

Feel free to add your own creative touches to this project. You can paint the Styrofoam, add ribbons, or use other decorative elements to make your wedding cake pop stand truly unique.

Enjoy creating this fun and budget-friendly wedding cake pop stand!

Upcycling old items

Using Coordinating Plates, Bowls, and Cups:

• Visit your local thrift store or flea market to find coordinating plates, bowls, and cups in various sizes. Look for pieces that can be stacked and glued together to create tiers.
• Start by choosing a wide bowl as the base and place a plate upside down on top of it. Check that the plate is stable and doesn't wobble.
• Slowly build your tiers by stacking and gluing the pieces together. You can use hot glue for temporary bonds or gorilla glue for permanent bonds.
• Before gluing, check your setup and ensure that the tiers are stable and balanced.
• Repeat this process until you've created the desired number of tiers for your stand.
• You can also leave some tiers removable so that you can customise the look for different events.

Upcycling Glassware:

• For this project, you will need a large glass plate, a small glass plate, and two glasses of the same diameter.
• Clean and dry your glassware before starting. Protect your work surface with old newspapers in case of any glue spillages.
• Turn one of the glasses upside down and apply a drop of strong, light-activated glue to the base. Then, place the large glass plate on top.
• Leave the glue to dry for up to 24 hours to ensure a full cure.
• To create a multi-layer stand, repeat the process with the second glass and the small plate. Then, attach the two stands by gluing the rim of the small glass to the centre of the large plate.
• This method will give you a beautiful DIY tiered cake stand that is sure to be a conversation starter at your wedding.

Using Household Items:

• If you're looking for a quick and easy option, you can use household items like an upside-down colander, an egg carton, or a wide-mouth jar filled with candies or coffee beans.
• Simply slide the cake pop sticks through the holes of the colander, or pierce holes in an upside-down egg carton and prop the sticks in the holes.
• For a more decorative option, fill a jar with candies or coffee beans that complement your wedding colours or theme, and then insert the cake pop sticks into the jar.

Frequently asked questions