Creating A Wedding Cake Pedestal From Bottles

A wedding cake pedestal made out of bottles is a fun and creative way to display cakes and treats at a wedding. To make a bottle cake pedestal, you will need a few supplies, including a flower pot, a decorative plate, and a strong adhesive such as Amazing Goop or E6000 industrial-strength adhesive. Turn the flower pot upside down and apply a line of adhesive along the edges of the bottom. Place the plate on top and let it dry and cure. You can also spray paint the bottle and plate before assembling, but be sure to use a paper doily if placing food directly on a painted surface. This project is a unique and economical way to add height and interest to a wedding dessert table.

Using a glass candlestick and a glass plate

Step 1: Gather Your Materials

You will need a glass candlestick, a glass plate, and strong glue. For the glue, options include E6000 industrial strength adhesive or Gorilla Glue. You can find these glues at local craft stores or online.

Step 2: Prepare the Plate and Candlestick

Clean both the plate and candlestick thoroughly to ensure proper adhesion. If you're using a second-hand candlestick, ensure the inside is completely dry.

Step 3: Apply the Glue

Turn the plate upside down on a flat surface and locate the centre. Apply a generous amount of glue to the top of the candlestick, ensuring it covers the entire contact surface with the plate.

Step 4: Attach the Plate and Candlestick

Firmly press the glued area of the candlestick onto the centre of the plate's underside. Some glue might ooze out from the sides; wipe away the excess with a paper towel.

Step 5: Allow to Dry and Cure

Let the glued assembly dry and cure completely. Refer to the glue's instructions for specific curing times. This typically takes longer than 10 minutes, so be sure to give it ample time before using your new cake stand.

Tips and Variations:

• You can use mismatched coloured plates and candlesticks and spray paint them to create a decorative stand. However, do not use spray-painted stands for food.
• For a unique, sentimental touch, consider using a plate from a family member for your stand.
• You can find glass candlesticks and plates at thrift stores, or you may already have some at home that you can repurpose.
• If you want to create a taller stand, you can use a smaller plate as a base, gluing the candlestick to its centre, and then attaching a larger plate on top.

With these simple steps and your chosen materials, you can create a beautiful and elegant wedding cake pedestal.

Using a flower pot and a plate

Materials:

• A flower pot (preferably a wooden one)
• A plate (glass or ceramic)
• Strong adhesive (such as E6000 industrial-strength adhesive)
• Paint (optional)

Instructions:

• Prepare your materials by cleaning the plate and flower pot thoroughly. Ensure that the flower pot is completely dry, especially if it's made of wood.
• Decide on the design of your cake stand. You can paint the flower pot and plate to match your wedding theme or leave them as they are.
• If you choose to paint, apply a thin coat of paint to all surfaces and allow it to dry completely. You may need to apply multiple thin coats for full coverage.
• Once the paint is dry, it's time to assemble the stand. Turn the plate upside down on a flat surface and find the centre.
• Apply a generous amount of adhesive to the top of the flower pot, ensuring it's centred and will make contact with the plate.
• Carefully place the glued area of the flower pot onto the centre of the plate's base.
• Remove any excess glue with your finger, and then wipe your finger with a paper towel.
• Allow the adhesive to dry and cure completely. Refer to the instructions on the glue label for the specified drying time.

And that's it! You now have a unique and personalised wedding cake stand. This DIY project is not only simple but also inexpensive, and it adds a special touch to your wedding celebration.

Feel free to decorate your stand further or even create multiple stands of varying heights for a more dynamic display. Enjoy crafting your one-of-a-kind wedding cake pedestal!

Using a ceramic plate and a vintage milk glass compote

Creating a wedding cake pedestal using a ceramic plate and a vintage milk glass compote is a simple and cost-effective DIY project. Here is a step-by-step guide to help you get started:

Materials:

• Vintage etched glass plates (ensure the centre is flat for better adhesion)
• Vintage etched glass vases (ensure they have a flat rim at the top)
• Industrial-strength adhesive, such as E6000, suitable for bonding glass
• White spray paint formulated to stick to glass (a glossier finish will give a more authentic milk glass look)
• Sandpaper
• Protective mask and safety goggles
• Doily or protective covering for the final product

Method:

• Source your materials from local thrift stores or charity shops. Etched glass plates and vases should be available for a few dollars each.
• Thoroughly clean and dry all glass pieces. Pay extra attention to this step as cut glass usually has many nooks and crannies.
• Flip the glass pieces over and protect the tops of the plates, as spray paint should not come into contact with any food surfaces.
• In a well-ventilated area, wearing protective gear, apply several thin coats of spray paint to the glass pieces, allowing ample drying time between coats.
• Let the paint dry completely for at least 24 hours.
• Lightly sand the flat rim of the vase to create a better surface for adhesion.
• Apply the adhesive to the sanded rim of the vase.
• Carefully place the painted side of the plate onto the glued area of the vase.
• Allow the glue to cure completely before use. Refer to the adhesive's instructions for specific curing times.
• Once cured, your wedding cake pedestal is ready for use! Just be sure to hand wash and avoid getting any vinegar or water mixture on the painted portions to prevent peeling. It is recommended to use a doily or protective covering when placing food on the stand.

Using a plastic charger and an old basket

If you're looking to make a wedding cake pedestal out of a plastic charger and an old basket, here's a creative and easy way to do it! First, find a plastic charger that can serve as the base of your pedestal. You can often find these at thrift stores or craft shops. Then, get an old basket that is preferably whimsical in colour and spray paint it to match your wedding theme.

Once you have your materials, it's simple to assemble. Start by turning your basket upside down and placing it on top of the charger. You can use a strong adhesive like Amazing Goop to secure the two pieces together. Let it dry, and you'll have a unique and whimsical wedding cake pedestal! You can also decorate it further with ribbons, flowers, or other embellishments that match your wedding theme.

This type of pedestal is a great way to add height and interest to your wedding cake display. It's also a fun and inexpensive DIY project that can be tailored to your specific style and colour palette. You can even make a few in different sizes and stack them to create a tiered effect. Just remember to put a paper doily on the pedestal before placing any food on it, as spray paint may not be food-safe.

Using glass bowls, short glasses, and candle holders

You can make a wedding cake stand using glass bowls, short glasses, and candle holders. Here's a step-by-step guide:

Materials:

• Glass bowls (varying sizes)
• Short glasses or candle holders (ensure they are wide enough to provide stability)
• Industrial-strength adhesive (e.g., e6000 or Beacon 3-in-1 glue)
• Disposable gloves
• Disposable storage container
• Bamboo skewers
• Parchment paper
• Cookie sheet
• Foil

Instructions:

• Start by gathering all your supplies and covering your work surface with parchment paper to protect it from stains.
• Place your glass items on a cookie sheet covered with foil. Elevate the items slightly off the bottom of the cookie sheet using small disposable items like paper cups or coffee pods.
• In a disposable storage container, mix 16 oz. of Gloss Lustre Mod Podge with a few drops of gel food coloring to achieve your desired color. Stir slowly and carefully to prevent bubbles.
• Add about two teaspoons of water to the mixture to thin it out. Continue stirring slowly and carefully.
• Pour the mixture over your glass items, ensuring all surfaces are covered.
• Let the items dry overnight, or until the mixture is completely dry.
• Preheat your oven to 200 degrees Fahrenheit. Place a new sheet of parchment paper on the baking sheet and put the glass items inside. Bake for about two hours.
• Allow the glassware to cool for about 30 minutes before handling.
• Now, it's time to assemble your cake stand. Decide on the order of your glassware, with the largest piece at the bottom and the smallest at the top.
• Apply a generous amount of industrial-strength adhesive to the rim of the first piece of glassware.
• Carefully place the second piece of glassware on top, centering it as best as possible.
• Repeat this process until all your glassware pieces are stacked and secured.
• Allow the adhesive to dry completely before using your new wedding cake stand.

Feel free to decorate your stand with additional items like ribbons, flowers, or paint to match your wedding theme.

Frequently asked questions