Creating A Luxe Wedding Crown On A Budget

how to make a money crown for wedding

Money crowns are a fun and unique way to gift cash to the happy couple on their wedding day. In the Philippines, it is a wedding tradition for the principal sponsors and guests to pin money on the newlyweds during the first dance, wishing them luck and prosperity. Money crowns are a creative way to present money as a gift, and they can be made to fit both children and adults.

Characteristics Values
Items needed Cash (use new bills or iron older bills to make them crisp)
Number of bills 10-14 bills for adults, 10 for children
Bill denominations $1 bills for the points of the crown, larger bills for the base
Preparation Clear tape, iron (optional)

shunbridal

Use new, crisp bills

Using new, crisp bills is the best way to ensure that your money crown looks its best. Older bills can be used, but they should be ironed first to make them crisp.

For the points of the crown, use one-dollar bills, as George Washington's face is centred and framed, and it looks better. For the base of the crown, use larger bills, depending on the amount of money you want to give.

For a child's crown, you will need around ten bills, whereas an adult's crown will require 12-14 bills.

If you don't have enough new, crisp bills, you can always supplement with shiny gold sheets of paper. Cut these to the same size as your bills, and fold them like an accordion. This will add colour to your crown and reduce the number of bills you need.

shunbridal

Iron older bills

If you want to make a money crown for a wedding, you'll need to ensure the bills you use are crisp and flat. Older bills can be ironed to achieve this effect. Here's a detailed, step-by-step guide on how to iron older bills to make them crisp:

Firstly, place your bill on a flat surface. An ironing board is ideal, but a table can also work. If using a table, place a shirt or other linen on the surface to prevent any damage. Next, moisten the bill with a small amount of water. You can use a spray bottle, or the spray function on your iron, to achieve this. It's important to only moisten the bill, rather than soaking it.

Now, adjust the settings on your iron. Set it to the lowest heat possible to avoid damaging the bill. Start ironing the bill slowly, using straight movements from one direction and then the other. Repeat this process a few times until the bill appears flat. Be careful not to iron any folds into the bill. If you're struggling, try placing the bill inside a shirt while ironing to keep it weighed down flat.

Once you're done ironing, let the bill cool down for about a minute. It will be very hot! After it has cooled, flip the bill over and repeat the ironing process on the other side. You can reapply moisture to this side if there are still noticeable folds or wrinkles.

Finally, store your newly flattened bill in a safe place. Place it alongside other bills in your wallet or money clip to keep it from crumpling.

By following these steps, you can transform older bills into crisp, flat currency that's perfect for crafting a money crown for a wedding.

shunbridal

Use 10-14 bills

Making a money crown for a wedding is a thoughtful and creative way to gift cash to the happy couple. Here is a step-by-step guide on how to make a money crown using 10-14 bills:

Firstly, you will need to prepare the bills. It is recommended to use new, crisp bills for a neater finish. If you are using older bills, you can iron them to make them crisp. For an adult-sized crown, it is suggested that you use 12-14 bills, whereas 9-10 bills are suitable for a child.

Now, let's begin constructing the crown. Place one bill face down and fold both the top right and left corners towards the center to create a point. Flip the bill over so it is face up, and then tuck the two ends under the front to form a triangle. Repeat these steps to create a total of five triangles.

Next, you will create the base of the crown. Take another bill and place it face up, then fold it in half lengthwise so that the crease goes across the nose on the face of the bill. Repeat this step four more times to create a total of five rectangles.

Now it's time to assemble the crown. Take one triangle and place it above a rectangle, taping them together to create a unit. You should now have five units. Fold back the rectangle on each unit so that it sits behind the triangle.

To connect the units, take two units and slide one rectangle inside the other, taping them together. Continue attaching the remaining units in the same way. Once all the units are joined, connect the two ends with tape to form a circle or crown shape.

Your money crown is now ready to be gifted! You can add extra decorations or a ribbon to finish it off, or even incorporate some colourful paper, as mentioned in the source. This money crown is sure to be a memorable and unique gift for the happy couple.

shunbridal

Use one dollar bills for the points of the crown

To make a money crown for a wedding, you can use one dollar bills for the points of the crown. This is because George Washington's face is centred and framed on the note, and it looks better.

To make the crown, you will need 10-14 bills, depending on the size of the crown you want to make. You can use clear tape to stick the bills together and create a secure crown.

Firstly, place a dollar bill face down. Fold both the top right and left corners to the centre to create a point. Flip the bill back over so it is face up, and tuck the two ends under the front of the bill to create a triangle. Repeat this process four more times so that you have five triangles in total.

Next, take another bill and place it face up. Fold it in half lengthwise so that the crease goes across the nose on the face of the bill. Repeat this process four more times so that you have five rectangles in total.

Now, take one triangle and place it above a rectangle. Tape them together in the centre to create one unit. Repeat this process four more times so that you have five units in total. Fold back the rectangle on each unit so that the rectangle is behind the triangle.

Finally, attach the units together by sliding the rectangle of one unit inside the rectangle of another unit. Tape the triangles and the rectangles together securely. Repeat this process until all the units are attached.

Connect the two ends of the final unit with tape to create a crown shape.

shunbridal

Use larger bills for the base

Making a money crown for a wedding is a fun and thoughtful gift idea for the happy couple. This unique gift is a great way to give money memorably and will surely be appreciated by the recipients. Here are some tips and instructions for creating a money crown, specifically focusing on using larger bills for the base:

Firstly, decide on the amount of money you want to give and plan out the number of bills you will need. For an adult's crown, it is recommended to use 12-14 bills, but this can vary depending on the size of the recipient's head. If you don't know their exact hat size, you can estimate by using a fitted hat as a guide.

For the base of the crown, you will want to use larger denomination bills. This will allow you to give a more substantial amount of money while keeping the crown manageable in size. The number of large bills you use will depend on the total amount you wish to give and the specific currency you are using. For example, if you are using $100 bills, you may only need a few for the base, whereas if you are using $20 bills, you will need more to reach the desired amount.

When constructing the crown, it is important to use new, crisp bills or iron older bills to make them crisp. This will ensure that the crown looks neat and presentable. For the base, you will be folding the bills in half lengthwise, so it is important to have a straight, crisp edge to work with.

As you assemble the crown, alternate between the larger bills for the base and smaller bills for the points of the crown. The smaller bills, such as $1 bills, work well for the points because the face on the bill is centered and framed, creating a visually appealing design. You can adjust the number of units in the crown to fit the recipient's head size.

When attaching the units together, use clear tape to secure the bills together. Be mindful that the crown may be taken apart to be spent, so tape accordingly. You can also add decorations or other creative touches to the crown, such as ribbons or colourful paper, to enhance its visual appeal.

A money crown is a unique and thoughtful way to gift cash at a wedding, and by using larger bills for the base, you can give a substantial and memorable gift to the happy couple.

Frequently asked questions

You will need 10-14 bills for an adult-sized money crown. For a child's crown, 10 bills will be sufficient.

It is recommended to use new, crisp bills. If your bills are old, iron them to make them crisp. For the points of the crown, use one-dollar bills, as George Washington's face is centred and framed, making it look better.

First, fold the bills into triangles. Then, fold other bills in half lengthwise. Next, tape the triangles and rectangles together to form units. Finally, attach the units together by sliding and taping the rectangles together.

Clear tape is a must for securing the money crown.

A money crown is a creative way to give money as a gift. It is perfect for weddings, graduations, and birthdays.

Written by
Reviewed by
Share this post
Print
Did this article help you?

Leave a comment