Adjusting Your Wedding Ring: Finding The Perfect Fit

A wedding ring is often the first piece of jewellery we wear daily, so it's no surprise that finding the right fit is challenging. A ring that fits well should slide over your knuckle with some friction and sit snugly on your finger without feeling too tight. But what happens when your ring is too loose? There are several ways to address this issue, from simple at-home fixes to professional resizing. This guide will explore how to make a loose wedding ring fit better, ensuring it stays securely on your finger.

Using tape or dental floss

Using Tape

You can use almost any type of tape, but natural cotton tape is preferred. The width of the tape should not be more than 3/8 of an inch. If it is wider, cut it in half. Cut the tape into 3/4 pieces, each about one inch in length. Wrap the tape around the inside of the ring, adding layers at the bottom part of the ring as needed to achieve the desired fit. Make sure that you wrap the tape tightly.

Using Dental Floss

For rings that twist and turn on your finger, a bit of non-adhesive dental wax can help secure a comfortable fit. Simply warm a small ball of wax between your fingers until it is pliable. Then, press the wax along the inner band of the ring, moulding it into place. The wax creates just enough friction to keep your ring from sliding without permanently altering the size.

Plastic ring adjusters

If your wedding ring is feeling a little loose, you may want to try a plastic ring adjuster. These are a great, affordable, and effective way to make your ring fit tighter without causing any damage. They are also a good option if you only need a temporary fix or are not ready to commit to permanently resizing your ring.

To use a plastic ring adjuster, simply choose the correct size for your ring and clip it onto the band. Then, put your ring on as usual, and the adjuster will ensure a perfect fit. It's a good idea to clean the adjuster regularly and remove it from the ring for cleaning.

You can buy plastic ring adjusters from a variety of online retailers, including Amazon and Etsy. They are a cheap and convenient solution to a loose ring, so you don't need to worry about it slipping off!

Squeezing the prongs

If you are uncomfortable with this method, it is best to take your jewellery to a professional jeweller for adjustments. They should be able to help you out quickly and safely.

Cutting and soldering

The process involves first measuring the ring in its current size and then calculating the difference between that and the desired size. The jeweller will then use a fine-toothed saw to carefully cut the ring band. The amount of metal removed will depend on the desired size reduction. Once the band is cut, the jeweller will use pliers to secure the two pieces together, ensuring they fit snugly.

The next step is to solder the two ends together. This is done using a soldering iron and solder wire, which creates a strong bond between the two pieces of metal. After soldering, the ring is polished to restore its original appearance.

It is important to note that cutting and soldering may not be suitable for all ring designs or materials. For example, rings with intricate detailing or certain types of metal may be difficult to resize using this method. Additionally, the area where the ring is soldered may be weaker than the rest of the band, and it is possible for the solder to break if too much pressure is applied.

Overall, cutting and soldering is a reliable method for resizing a ring and maintaining its structural integrity. However, it is important to consult a professional jeweller to determine the best approach for resizing your ring.

Knotting the band

If you need to make a ring smaller, one approach is to knot the band. This method works for a variety of ring types and can be done using either thread or fishing line, depending on the band's material.

To knot the band, start by sliding one end of your chosen material inside the band. Then, tie a knot around itself and tighten the ends. Finally, secure the knot with nail glue or superglue. This method should reduce the size of your ring by about one-quarter to one-half inch, but be sure to test it first as some bands may not handle much tension before breaking. For added security and a tighter fit, you can also try tying more than one knot in the band.

It is important to note that this method may not work for all ring types and materials. If you are uncomfortable with this method, it is recommended to consult a professional jeweller for adjustments.

Frequently asked questions