Crafting A Wedding Ring Box From Lego Bricks

There are many ways to add unique touches to your wedding day, and one way to do this is by using Lego bricks. Lego elements can be used in a variety of ways to elevate your wedding, from decor and flowers to music and cake. One idea is to create a custom Lego ring box to carry the wedding bands on the big day. This can be a fun activity for both the happy couple to do together. There are various designs for Lego ring boxes available, including one that replicates the famous Tiffany & Co blue box.

Customise your box with colours of your choice

Customise Your Lego Ring Box

The fun part about making your own Lego ring box is that you can customise it to your liking. You can choose the colours that match your wedding theme, or simply your favourite colours.

If you're looking for a simple design, you can follow the instructions in the Lego Ideas proposal, which uses only 71 pieces to create a ring box. This design highlights the special ring you'll place inside and can be kept as a memento for years to come.

For a more intricate design, you can purchase instructions from Etsy to create a Lego ring box with a ribbon wrapping around it and a heart on the lid. The colours can be switched out to suit your preferences. The external dimensions of the box are 4.8cm x 4.8cm x 4.2 cm, and the internal compartment size is 3.2cm x 3.2cm x 2.5cm.

If you're feeling adventurous, you can design your own unique Lego ring box from scratch. A video posted on the Lego South Africa account demonstrates how to use spare bricks to build a ring box. The main colours used in the video are green and yellow, but you can customise it with different colours and pieces. You can also add your own personal touches, such as a tiny plastic ring, to make it even more special.

Make a tiny plastic ring to ensure the real one fits

To make a tiny plastic ring to ensure the real one fits, you can follow these steps:

First, source a cheap plastic ring that is roughly the right size. You can find these online or at thrift stores. Remove any paint or decorations that you don't want with a tool like a Dremel, taking care not to apply too much pressure and ruin the shape of the ring. You can also use a sanding tool to smooth out the surface.

Next, you will need to gather the right paints and tools. For painting, you will need a palette, glaze, water, and gouache paint in your chosen colours. You will also need some form of adhesive, such as modge podge or white glue, to prevent the paint colours from mixing.

Now, you can begin painting. Using your reference image, sketch a rough outline of your design onto the ring with paint. You will likely need at least two layers of paint for an opaque finish, and remember to allow sufficient drying time between coats. Once you are happy with the coverage, apply a layer of your chosen adhesive, and then a final layer of glaze to finish.

Finally, if the ring is not the correct size, you can use a Dremel tool to carefully grind away the ring attachment and replace it with a loop of elastic, or a blank ring pad/tray, which can be purchased from craft stores.

This process allows you to create a custom tiny plastic ring, ensuring the real ring will fit when you propose with your Lego ring box!

Create a ribbon-wrapped design with a heart on the lid

To create a ribbon-wrapped Lego wedding ring box with a heart on the lid, you can follow these steps:

First, decide on the colour of your Lego bricks and the ribbon. The ribbon can be easily switched out to suit your personal taste and the theme of your wedding. You will also need Lego bricks, a Lego baseplate, and a ring insert or cushion for the inside of the box.

Next, build a square or rectangular box with a lid using the Lego bricks. The size of the box will depend on the size of your ring and the thickness of your ribbon. Ensure the lid is secure and fits snugly on the box.

Now, cut a length of ribbon that is long enough to wrap around the box with some excess. Drape the ribbon horizontally across the top of the box, leaving about 4-8 inches (10-20 cm) hanging off the side for the bow tail. Pull the rest of the ribbon under the box and back to the front, crossing it with the shorter end so both ends are vertical.

Then, pull the longer end of the ribbon under the box and back up, wrapping it around the box horizontally to create a plus sign. Cross the ribbons again to make a second plus sign, wrapping the ribbon vertically. You can secure the ribbon with a small piece of double-sided tape if needed.

Now, create a bow by folding both ends of the ribbon into loops and crossing them to form a basic knot. Pull on the loops to tighten the knot and adjust the bow. You can trim the excess ribbon to clean up the bow, cutting the ends at an angle for a fancier touch.

Finally, build a Lego heart using red or pink bricks and attach it to the centre of the lid. You can also add other decorations, such as a tassel or foliage, to give it a personal touch.

Your Lego wedding ring box with a ribbon-wrapped design and a heart on the lid is now complete!

Use a hinge to allow the box to open and reveal the ring

To make a Lego wedding ring box with a hinge, you'll need to gather the necessary Lego pieces in your chosen colours. You can either purchase a specific set or use your spare bricks. Consider the size of your ring and the internal compartment size of your box. The box should be able to securely hold the ring without it falling out, even when shaken.

When constructing the box, you'll need to incorporate a hinge mechanism that allows the box to open and reveal the ring inside. This can be achieved by using flexible Technic axle connectors or other similar Lego pieces. The hinge should be placed at the back of the box, replicating the look of a traditional ring box.

In addition to the hinge, you may also want to include a clasp or button mechanism to securely close the box. This adds an extra layer of security and creates a more interactive experience when opening the box.

The internal mechanism to hold the ring in place is crucial. You can use flexible Technic axle connectors or other Lego pieces to create a snug fit for the ring. Ensure that the ring doesn't move around too much but is still easy to remove.

Once you've assembled the box, you can customise it further by adding a Lego heart or other decorative elements to the lid. You can also wrap a ribbon around the box or incorporate other personal touches that reflect your style and the occasion.

Use the Pick a Brick service to find all the pieces you need

To make a Lego wedding ring box, you can use the Pick a Brick service from Lego to find all the pieces you need. The Pick a Brick service allows you to choose from a wide range of Lego bricks and pieces to create your own unique designs.

On the Pick a Brick website, you can browse through various categories, such as bestsellers, standard parts, and different Lego themes, to find the pieces that fit your needs. There are also filters to help you narrow down your search, such as price range, colour, and type of piece.

For your wedding ring box, you might want to consider using a combination of different-sized bricks, plates, and tiles to create a box with a lid. You can also add decorative elements, such as a ribbon or a heart, to make it more elegant and suitable for a wedding.

When selecting the pieces, pay attention to the size and dimensions of the bricks to ensure they fit together properly. You can also mix and match colours to create a unique design that reflects your personal style.

The Pick a Brick service offers a convenient way to gather all the necessary pieces for your Lego wedding ring box project. By taking advantage of the search filters and carefully considering the design and colour scheme, you can efficiently create a special box for your wedding day.

Frequently asked questions