Creating A Wedding Car Statement Bow

If you're looking to add a decorative touch to a wedding car, a big bow is a great way to do it. You can make your own bow using florist ribbon, wired ribbon, paper, or floral ribbon. The process is simple and only requires a few basic supplies like scissors, a ruler, and glue. You can also purchase ready-made bows online, which often come with convenient features like suction cups or magnets for easy attachment to the car. With a bit of creativity and some ribbon, you can create a beautiful and festive touch to the wedding car.

How to make a large cluster bow for a wedding car

Making a large cluster bow for a wedding car is a fun and simple task. You can use florist ribbon or wired ribbon to create a beautiful bow to decorate the car. Here is a step-by-step guide to help you get started:

Materials:

• Florist ribbon or wired ribbon in your choice of colour
• Scissors
• Ruler (optional)
• Pipe cleaner (optional)

Step 1: Cut the Ribbon

Start by cutting your chosen ribbon to the desired length. If you're using florist ribbon, cut a piece between 15 and 20 inches long. For wired ribbon, take a long piece, at least 2 yards, and create a loop. Remember, the longer the ribbon, the bigger the bow.

Step 2: Create the First Loop

For florist ribbon, make a "bunny-eared" loop and twist the longer end twice to create a rope-like effect. Make sure the shiny side of the ribbon is facing up.

For wired ribbon, wrap the ribbon in a continuous circle around the loop you created.

Step 3: Create the Second Loop

Create another "bunny ear" with your ribbon, adjusting the loops to your desired size. Ensure that the tails are fairly even.

Step 4: Form the Centre

For florist ribbon, fold the left loop over the right loop and bring it around and back through the centre hole, similar to tying a shoe. Pull tight to create a knot.

For wired ribbon, pinch the centre of the loop and wrap a matching pipe cleaner around it to secure it. Twist, tighten, trim, and discard any excess pipe cleaner.

Step 5: Create the Tails

For florist ribbon, simply trim the ends of the tails to your desired length.

For wired ribbon, cut vertically through the centre of the bow's tail to create two separate tails. Use these tails to tie a standard knot around the centre of the folded ribbon, covering up the pipe cleaner.

Step 6: Adjust and Fluff

Finally, fan out the loops of your bow to achieve the desired shape and fullness. You can trim the tails if needed.

And there you have it! A beautiful, large cluster bow for a wedding car. Feel free to add any extra decorations or charms to personalise your bow further.

Using florist ribbon to make a wedding car bow

Using florist ribbon is a great way to make a wedding car bow and decorate the happy couple's transport. Here is a step-by-step guide to creating a florist ribbon bow for a wedding car:

Firstly, decide on the colour palette for the ribbon. It is a good idea to use the wedding colour scheme or theme for inspiration. For example, if the wedding is taking place in a forest, you might use complementary colours like green, maroon and brown.

Next, you will need to decide on the type of ribbon. For a classic bow, double satin ribbon is a popular choice. The standard amount of ribbon for a wedding car is around 6 metres, but you can adjust this depending on the size of your bow and car. You could also opt for wired ribbon, which will allow you to create a more dramatic shape. If you want to add a floral touch, sheer organza ribbon is a good option as it is easy to twist and fold.

Now it's time to start creating your bow. Cut a piece of ribbon between 15 and 20 inches long. If your ribbon is thicker, you may want to cut a longer piece. Create a bunny-eared loop and twist the longer end twice so it becomes rope-like, ensuring the same side of the ribbon is still facing up. Make a second bunny ear and adjust the loops to your desired size.

Then, fold the left loop over the right and bring it back through the centre, just like tying a shoelace. Pull it tight to create a knot and adjust the loops and tails until you are happy with the shape. You can trim the ends if you wish.

To attach the bow to the car, you can use magnetic tape, which won't damage the paintwork. Secure the bow to the hood of the car, or stick it onto the back near the latch of the trunk. You could also place the bow at the front of the hood if you have V-shaped ribbons across the car, to cover any messy ends.

Finally, you can add some extra flourishes to your wedding car. Try adding some streamers or ribbons to the windows or bumper, or tying bows to the rearview mirrors. You could even add some plastic soda bottles or heart-shaped balloons to the ribbons for a fun, festive touch.

Making a bow out of wired ribbon

Firstly, you will need to source your ribbon. Wired ribbon is a great choice as it is easy to manipulate and shape, allowing you to create a full and elegant bow. You can choose any colour or pattern you wish, perhaps matching a wedding colour scheme or theme.

Once you have your ribbon, cut a length that is long enough to go around the width of the car, with some extra to create the bow. You can always cut it down later if needed. Now you are ready to start creating the bow.

Take your ribbon and create a small loop at one end, then twist the ribbon and create another loop, this time slightly larger. Continue to create loops, gradually increasing the size of each loop as you go. You should end up with a set of loops that form a circle, with the smallest loop in the centre and the largest on the outside. Secure the loops together by twisting and wrapping the remaining ribbon around the centre. You can then fluff and adjust the loops to create a full and even bow.

Finally, attach the bow to the car, securing it with the remaining ribbon, or with wire or string if needed. You can add extra ribbon tails or other decorations to finish it off.

Making a bow with a floral ribbon

Materials:

• Floral ribbon
• Wired ribbon (optional)
• Thin-gauge wire
• Scissors
• Tape or glue (optional)

Step 1: Cut Your Ribbon

The first step to making a bow with a floral ribbon is to cut your ribbon. You will need two pieces of ribbon, one short (about 12 inches) and one long (up to two yards, depending on the size of your desired bow).

Step 2: Create Loops

Next, you will create loops with your ribbon. Take the long end of the ribbon and make a small loop, then twist the ribbon where the loop ends. Continue making loops, alternating sides, until you have made three to five loops on each side. You should still have some hanging ribbon, which will become one of your tails.

Step 3: Secure the Bow

Now, use the shorter piece of ribbon to tie the loops together in the middle of the bow. Double knot the ribbon, leaving one end loose, which will become the other tail.

Step 4: Cut and Fluff the Tails

Cut the tails to your desired length, making sure they are symmetrical. Fluff out the loops to give your bow a full and rounded appearance.

Tips:

• It is better to have longer tails that you can cut shorter than to have tails that are too short.
• If you are using glue on your ribbon, test it on an inconspicuous area first and let it dry. Some types of glue may show through the ribbon.
• If you want to add a hair elastic to your bow, you can tie it around the wire in the centre when wrapping and concealing it.

Buying a big bow for a wedding car online

There are many options for buying a big bow for a wedding car online. Etsy, for example, offers over 5,000 products related to "wedding car bows". These include personalised wooden card boxes, acrylic card boxes, and vinyl decals, among other items.

Amazon also offers a wide range of large car bows, including 16" and 18" bows in various colours such as white, blue, and hot pink. These bows are advertised as fully assembled and easy to attach to cars, with features such as suction cups and magnets for secure placement.

Another option is the Car Bow Store, which offers a variety of bow sizes, colours, and attachment methods. Their bows are manufactured in the United States using deluxe materials, including vinyl, coated magnets, and deluxe suction cups.

With so many options available, you can easily find the perfect big bow to decorate a wedding car and make the occasion even more special and memorable.

Frequently asked questions