Attaching Rings To The Ring Bearer Pillow

Tying rings onto a ring bearer pillow is a simple process, but it's important to ensure the rings are firmly attached yet easily removed. The method for tying the rings will depend on the design of the pillow. Many pillows will have a ribbon in the middle, which can be used to secure the rings. To do this, create a loop with the ribbon and place the rings over it. Then, lift the end of the string and place it over the loop, before pulling it tight to secure the rings in place. Repeat this process on the other side of the pillow. When it's time to exchange the rings, they can be easily removed by pulling them towards you.

How to tie the rings to the ribbon

To tie the rings to the ribbon, you will need to create a loop with one end of the ribbon. Place the ring over this loop and then lift the same end of the ribbon over the loop. Next, place the end of the ribbon through the bottom of the loop and pull it tight to create a knot. Repeat this process for the second ring. Finally, place both rings in the centre of the pillow.

• Hold one end of the ribbon to form a loop.
• Place the ring inside the loop.
• With your other hand, hold the opposite end of the ribbon.
• Pull both ends of the ribbon to tighten the loop.
• Repeat the process on the other side of the pillow.
• Place the rings in the centre of the pillow.

How to make a ring pillow without sewing

Making a ring pillow without sewing is a simple process and a great way to add a unique touch to your special day. Here is a step-by-step guide on how to create a no-sew ring pillow:

Step 1: Cut and Prepare the Fabric

Start by selecting a fabric that complements your wedding theme. Cut two square pieces of fabric that are approximately 10 inches (25 cm) in size. If you prefer a different size, you can adjust the measurements accordingly. Remember to add a small allowance, about 1/4 inch (0.64 cm), to the length and width for the seams. Clip the corners of the fabric squares by about 1/4 inch (0.64 cm) to reduce bulk and help conceal the raw edges.

Step 2: Fold and Glue the Edges

Turn each fabric square so that the wrong side is facing you. Fold all the edges by about 1/4 inch (0.64 cm) towards the wrong side and press them with an iron to create neat hems. If you are using a fabric like burlap that holds folds easily, you may not need to use an iron. Unfold one edge and apply a thin line of hot glue or fabric glue along it, then press it back down. Repeat this gluing process for all the hems on both fabric squares.

Step 3: Assemble the Pillow

Place one fabric square with the wrong side facing up. Take the other square and place it on top, with the right side facing up. Carefully glue three of the edges together, allowing the glue to dry before proceeding. Remember to ensure that the entire width of each hem is coated with glue for a neat finish. Leave the fourth edge open for stuffing the pillow.

Step 4: Stuffing and Final Touches

Now, it's time to stuff your pillow! Polyester stuffing is a great option, but you can also use foam or a mini pillow insert. Make sure the stuffing is evenly distributed within the pillow. Once you're happy with the fullness, it's time to glue the final seam. Work in small sections, gluing and holding each part until it sets before moving on. You can use hot glue or fabric glue, depending on your preference.

Step 5: Adding the Ribbon and Rings

Choose a ribbon that complements your pillow, and cut a length of about 30 inches (76 cm). You can adjust the length to your liking. Create a slipknot by folding the string in half behind the ribbon and pulling the ends through the loop. Center the knot on the ribbon, then glue the bow to the middle of your pillow. Finally, thread the rings onto the string and tie a simple knot or a bow to secure them.

And there you have it! A beautiful, no-sew ring pillow ready to be used by your ring bearer. Feel free to add any additional decorations or embellishments that match your wedding theme.

How to decorate a ring pillow

There are many ways to decorate a ring pillow and give it a personalised touch. The ribbon used to tie the rings can be decorated with small flowers or charms. The pillow itself can be adorned with cutouts of different materials, adding contrasting textures, patterns, or colours. For a traditional look, chiffon or lace can be added to match the bridesmaids' theme. Trims and embroidery can also be used to decorate the pillow, as with other ornamental pillows.

For a playful look, use two printed fabrics or a striking floral print. A velvet pillow with ribbon embroidery is another option, modelled after woven-leather designer handbags. A vintage linen ring pillow is a beautiful way to present the "symbols of a new union" on a "something old". You can use an heirloom handkerchief or another vintage linen, with a few stitches to keep it in place, which can be snipped later. If you don't have a vintage piece, you can find one at a flea market.

For a unique look, a shell can be gilded with gold paint and attached to the pillow with a ribbon. A basic white cushion can be given a brilliant edge with sequins, making the rings stand out. A silk flower ring pillow adds elegance, with silk dupioni, shantung, or taffeta holding their shape well. For a romantic look, a sun-printed ring pillow can be made from Lumi Print Fabric With Light Kit and plain cotton, edged with matching cord.

How to attach the rings to the pillow

There are several ways to attach rings to a ring bearer pillow. The most common method involves using a ribbon and a string. Here is a step-by-step guide:

Step 1: Prepare the Ribbon and String

Choose a ribbon and string that complement the colour and style of your pillow. Cut the ribbon to your desired length, taking into account any trimming you may want to do later. Then, create a slipknot by folding the string in half and placing it behind the ribbon. Pull the ends of the string through the loop and tighten the knot. Centre the knot by sliding it across the ribbon.

Step 2: Form a Bow with the Ribbon

Take the left and right ends of the ribbon and fold them into loops. Cross the left loop over the right loop, and then thread it through the gap you've created. Pull on the loops to tighten the bow. Ensure that the strings remain outside of the bow.

Step 3: Secure the Bow to the Pillow

Place a dab of hot glue or fabric glue in the middle of the pillow, and press the bow into it. Allow the glue to dry completely. If you prefer, you can sew the bow onto the pillow using matching thread. Make sure that the strings hang below the loops.

Step 4: Attach the Rings

Thread both wedding bands onto one of the strings. Then, tie the two strings into a simple knot or a bow. You can also place the rings onto a loop formed by the string and then tighten the loop by pulling on both ends of the string.

Alternative Methods:

If you don't want to use a ribbon and string, there are other ways to secure the rings:

• Use a pincushion as your ring bearer pillow. Thread the ribbon through the rings and secure the ends to the cushion with a long decorative pin.
• Create a tufted effect by sewing a button in the centre of the pillow. Attach the rings by tying them to the button with a thin ribbon.
• Wrap a ribbon around the pillow and tie it in a knot or bow. Thread the rings onto the ribbon before tying it.
• Use a small box, such as an ice cream pint, covered in ribbon or fabric. Secure the rings to the ribbon with a knot or bow.

How to make a ring pillow with sewing

To make a ring pillow with sewing, start by selecting your fabric. Cut two 10-inch squares of fabric, or adjust the size to your preference. Stack the squares with the right sides together and secure the edges with pins. Sew three of the edges with a 1/4-inch seam allowance, using a sewing machine or sewing by hand.

Next, trim the corners to reduce bulk and achieve a nicer finish. Turn the pillow right side out, using a pencil or knitting needle to push out the corners. Stuff the pillow with polyester, foam, or a blank ring pillow. Close the open seam by folding and pinning the raw edges, then hand sew the opening shut.

For the next step, attach a string to a ribbon with a slip knot. Position the loop behind the ribbon and pull the ends of the string through the loop to create a knot. Tug the ends to tighten the knot and centre it on the ribbon. Form the ribbon into a bow by creating loops with the left and right ends, crossing them over, and threading the left loop through the gap. Pull on the loops to tighten the bow.

Secure the bow in the middle of the pillow by sewing or using hot glue. Trim and singe the ribbon and strings to your desired length, and then tie the rings to the strings. Thread both rings onto one string and tie a knot or bow.

Your ring pillow is now complete and ready for the rings to be attached.

Frequently asked questions