Wedding Pew Bow Dimensions: A Guide To Sizing And Style

Wedding pew bows are a popular choice for couples looking to add a touch of elegance to their ceremony. These bows come in a variety of sizes, with some large bows measuring 16 inches wide and 30 inches long, while others are as small as 8 inches wide. They are often made from materials like tulle, satin, and organza, and can be decorated with flowers, ribbons, or brooches. Couples can choose to make their own bows or purchase them from sites like Etsy and Amazon, where they can find a wide range of options to suit their wedding theme and colour palette.

How to hang wedding pew bows

Wedding pew bows are a beautiful way to decorate the aisle and seats of your wedding venue. They can be hung in a few different ways, depending on the materials you have available and the rules of your venue.

Using Pew Clips

Pew clips are the most common way to attach bows to pews. They are small hooks that attach to the bows and hang over the ends of the pews. You can buy pew clips from a wedding or craft supply store—they come in metal or plastic and a variety of colours. To use them, slide the lower hook of the clip through one of the knots on the back of the bow, then tie a small bow around the lower hook to hide it. Finally, hang the larger hook over the armrest or side of the pew and fluff the bow to conceal the upper hook.

Using Ribbon or Rubber Bands

If you are unable to use pew clips, you can also attach pew bows using ribbon or rubber bands. Take a yard and a half of satin ribbon and tie it around the entire end of the pew, securing it with a tight knot. Then, wire or tie the bow onto the ribbon. Alternatively, you can use a large rubber band in the same way.

Using Elastic Bands

If you are concerned about the pews being scratched by pew clips, you can build elastic bands into the back of the bows. This method also helps to hide how the bows are hung.

Wedding pew bow size

Wedding pew bows are a great way to add colour and style to your ceremony. They are usually made from wired organza or satin ribbon and can be decorated with flowers or artificial flowers. The size of the bow will depend on a few factors, including the size of the pew and the desired look.

Most pew bows are made with ribbon that is around 6 inches wide and have loops that are between 8 and 10 inches wide. The loops are created by folding the ribbon and securing it with wire or by tying it in a knot. The tails of the bow can be left long, often reaching the floor, or they can be cut at an angle to give a more finished look. The length of the tails will also depend on the desired look and feel of the bow.

Some bows are more voluminous than others, with some having up to 8 loops. These bows will be larger and more dramatic, and so may be more suitable for larger venues or for creating a more extravagant look. The size of the bow can also be adjusted by trimming the ribbon to the desired length.

When planning the size of your wedding pew bows, it is important to consider the number of pews at your venue and the method of attachment. Visiting the venue and measuring the area where the bows will be attached is a good way to ensure that your bows are the correct size.

Wedding pew bow materials

Wedding pew bows are a great way to add a creative touch to your ceremony and reception. You can make these bows yourself or buy them ready-made. Here are some materials you'll need to create beautiful wedding pew bows:

Ribbon:

The type of ribbon you choose is important. Wired ribbons, such as satin, organza, or tulle, are ideal for creating voluminous bows without complicated tying. You can find these ribbons in various colours and widths to match your wedding theme. Consider using ribbons that are 6 inches wide for a more substantial look.

Flowers:

Adding flowers to your pew bows can create a gorgeous, elegant touch. You can use a single rose or other large bloom, along with baby's breath or other filler flowers and greenery. This combination will add colour and style to your ceremony décor.

Floral Tape and Wire:

Floral tape and wire are essential for creating secure connections between the flowers and ribbons. The floral tape helps to bind the flower stems together, while the wire can be used to attach the flowers to the ribbon knot.

Pew Clips:

Pew clips or holders are necessary for attaching the bows to the pews. These can be made of clear plastic or heavy-duty rubber bands. When using clips, be sure to check the protocol of the church to ensure you are using the appropriate attachment method.

Other Embellishments:

You can also add other embellishments to your pew bows, such as brooches or diamantes. These extra details can enhance the overall look of your wedding décor.

With these materials and a bit of creativity, you can design beautiful wedding pew bows that will impress your guests and create lasting memories.

Wedding pew bow styles

Wedding pew bows are a great way to add colour and style to your ceremony. They can be made from a variety of materials, including tulle, organza, satin, and chiffon, and can be decorated with flowers, ribbons, and brooches. Here are some style ideas for wedding pew bows:

Simple Tulle Bow

A simple yet elegant option is to use a large tulle bow. Tulle is a soft, lightweight fabric that can be easily shaped and manipulated. You can find pre-made tulle bows in various colours and sizes, or you can make your own. These bows can be attached to the pews using ribbon, wire, or elastic bands.

Wired Organza Ribbon Bow with Flowers

For a more intricate look, you can create a bow using wired organza ribbon. This type of ribbon allows you to create a voluminous bow without complicated tying. Start by gathering your materials: 2.5 yards of six-inch-wide wired organza ribbon, a large bloom such as a rose, baby's breath or other filler flowers or greenery, and floral tape and wire. Cut the flower stems to about six inches and arrange them together using floral tape. Fold the ribbon in half and create a loop that is slightly larger than what you need to attach it to the pew. Tie a simple knot and place the flowers at the knot, securing them with floral wire. Create loops with the remaining ribbon, adjust their length, and cut the ends at an angle for a finished look.

Pre-made Pull Bows

If you're short on time or prefer a simpler option, you can opt for pre-made pull bows. These bows come in various colours and sizes, and some even have tulle tails for added elegance. They are easy to attach to the pews and can be found on sites like Amazon and Etsy.

Bow with Artificial Flowers and Greenery

For a natural and romantic look, combine your pew bows with artificial flowers and greenery. You can find sets of artificial flowers and eucalyptus leaves that are designed to be attached to the pews along with the bows. This style adds a delicate and whimsical touch to your ceremony.

Bow with Brooch

If you want to add a touch of sparkle or a personal touch to your pew bows, consider decorating them with a brooch. You can find brooches in various styles and colours to match your wedding theme. The brooch can be pinned to the centre of the bow, adding a unique and elegant detail to your ceremony decor.

Wedding pew bow alternatives

Wedding pew bows are a popular way to decorate a church for a wedding. They are often made of tulle, satin, or organza ribbon and can be quite large, measuring about 16 inches wide and 30 inches long. They are typically used to decorate the ends of pews or chairs, and can also be used to decorate wedding cars.

• Flowers: Fresh or artificial flowers can be used to decorate pew ends or chairs. You can choose flowers that match your wedding colours or theme.
• Fabric drapes: Instead of bows, you could use fabric drapes to decorate the pews or chairs. These can be made of tulle, chiffon, or other lightweight fabrics and can be left plain or decorated with flowers, ribbons, or other embellishments.
• Reserved signs: For a more practical approach, you could use reserved signs to decorate the pews or chairs. These can be simple and elegant, or decorated with flowers, ribbons, or other details to match your wedding theme.
• Lanterns: Hanging lanterns or fairy lights can add a romantic touch to your wedding decor. You can choose lanterns that match your colour scheme and decorate them with flowers or greenery.
• Garlands: Flower or greenery garlands can be draped over the ends of pews or chairs for a natural, rustic look.
• Ribbons: Streamers or ribbons can be used to create a festive and colourful atmosphere. You can choose ribbons in your wedding colours and hang them from the ends of the pews or chairs, or use them to create a backdrop.

Frequently asked questions