Rhiannon Hendricks
For women with a large bust, finding a wedding dress that is both supportive and stylish can be challenging. While some opt for a strapless dress with a built-in corset, others may prefer the freedom of a backless design. However, going backless presents its own set of challenges, especially in the bra department. From booby tape to sewn-in cups and custom-built bras, there are several solutions for brides-to-be who want to rock a backless dress with confidence and support.
Explore related products
$21.99
What You'll Learn
Sew cups into the dress
Sewing cups into a backless wedding dress is a common solution for brides with a big bust who want to avoid wearing a bra. However, this method has been described as a "mistake" by some sources, who argue that sewing in cups does not change the sizing of a dress and does not provide enough structure or support for larger busted women.
Despite this, some brides may still prefer to sew cups into their dress for added coverage or shaping. If you plan to do this, it is crucial to position the cups correctly on the inside of the dress. You can use safety pins to temporarily secure the cups in place and then try on the dress to ensure that the cups line up correctly. Once you are happy with the placement, you can begin sewing.
The easiest way to sew in the cups is by using a whipstitch. It is important not to make the stitches too tight, as this can cause the fabric to pucker or give the cup an odd shape. Make sure that you are only stitching through the lining and the cup, being careful not to sew through to the outside of the fabric.
For larger busted women, sewing cups into the dress may not provide enough support on its own. In these cases, it is recommended to take measurements of the rib cage at its smallest point and sew a non-stretch ribbon to each piece of boning, so that it hooks securely behind the zipper. This provides additional support and helps to prevent the bust from slithering down.
Steaming Your Own Wedding Dress: Is It Possible?
You may want to see also
Explore related products
$38.99
Wear a strapless bra
If you're planning to wear a backless wedding dress and have a big bust, one option is to wear a strapless bra. While some people suggest adding cups to your dress with alterations, this might not be supportive enough for bigger busts.
If you want to wear a strapless bra with your backless dress, there are a few options. You could try a backless, strapless bra, which can provide enough support for bigger busts. You could also try a longline strapless bra, which has been described as providing good support.
If you can't find a backless bra in your size, you could ask a seamstress to sew a strapless bra into your dress. This could provide the support you need, and the bra won't be visible.
Another option is to wear a strapless dress with a built-in corset, which will provide support and allow you to wear a strapless bra.
Finding Your Dream Wedding Dress: A Guide
You may want to see also
Explore related products
$38.7 $42.99
Use booby tape
Boob tape is a great option to provide support and shape when wearing a backless wedding dress. It can be customised to fit any body shape and size and can be used to lift the breasts and hold them in place, giving a perky look. Here is a step-by-step guide on how to use booby tape for your backless wedding dress:
Prepare your skin:
Firstly, prepare your skin by cleaning and drying it. Use a mild cleanser to remove any dirt or oils from your skin and then pat your skin dry. Avoid applying any lotions or sunscreens as this can make the tape less likely to stick.
Protect your nipples:
Before applying the boob tape, it is recommended to use nipple covers or pasties. This protective barrier will prevent pain and irritation when removing the tape and will also help create a flawless appearance by smoothing out any curves under the tape.
Measure and cut the tape:
Consider the style of your dress and your breast size to determine the needed tape length. Cut strips of tape that are slightly longer than the width of your chest. If you have a larger bust, opt for tape that is at least four inches wide to get better coverage and support.
Apply the tape:
Stand in front of a mirror and hold your breast as high as you would like it to sit in the dress. Start by attaching the tape to the side of one breast, pulling it across to the side of the other breast. You can push and lift your breasts together to enhance the cleavage. Repeat this step with two or more strips of tape, adding more tape underneath or across the top for extra support and lift.
Adjust and secure:
Adjust the tape placement according to the style of your dress. For example, use vertical strips for plunge necklines and horizontal strips for non-plunging necklines. Check that the tape is not visible from behind or under your arms. For extra security, use double-sided tape to hold the dress in place, especially if the neckline is low.
Removal:
When removing the tape, apply coconut oil or your favourite body oil to the edges and slowly peel it off to avoid irritation. Finally, use aloe or a soothing moisturiser on your bust area to maintain skin health and comfort.
It is recommended to practice this technique before your wedding, especially if you want to feel confident and comfortable on your special day.
Your Dream Wedding Dress: Playbuzz Quiz
You may want to see also
Explore related products
Wear a backless, strapless bra
If you have a large bust and want to wear a backless wedding dress, you may be concerned about finding a bra that provides support and is invisible. One option is to wear a backless, strapless bra.
A standard strapless bra may work if the back of your dress only falls halfway down. However, if the back is lower, you can wear a strapless bra with clear wings on the side instead of a complete band, which will be invisible. You can also try going down a size for a better fit.
If you want more support, a strapless bodice, or longline bra, may be a good option. These feature traditional cups with extra support along your rib cage. You can also find convertible bras with clear straps, which are great for large busts as they provide more support than a strapless bra.
If you want to wear a halter-style backless dress, you can use a convertible bra by removing one strap and pulling the other strap behind your neck to the opposite side.
Another option is to customise a bra you already own by cutting off the side bands and gluing or sewing the cups into your dress. However, keep in mind that sewing the cups in will make the stitching visible on the front of the dress.
Bustling Your Wedding Dress: To Do or Not to Do?
You may want to see also
Explore related products
$19.99
$14.99
Choose a dress with a built-in bra
If you have a big bust and want to wear a backless wedding dress, one option is to choose a dress with a built-in bra. This can provide more support and coverage than a backless bra or adhesive cups.
Some dresses come with a built-in corset that offers support and allows you to wear a strapless bra if desired. You can also find dresses with boning or thick elastic in the bodice for additional support. Bridal salons often carry dresses with more "back" coverage to accommodate larger busts.
If you find a dress you love that doesn't have a built-in bra, you can ask about adding one during alterations. This may involve sewing cups into the dress or attaching a separate bustier underneath. However, keep in mind that simply sewing in cups may not provide enough support for larger busts.
When trying on dresses, be sure to consider your comfort and support needs. You want to feel confident and secure on your wedding day, without constantly adjusting your dress. A well-fitted dress with a built-in bra can help you achieve this.
In summary, choosing a dress with a built-in bra or corset can be a great option for those with a big bust who want to wear a backless wedding dress. It provides more coverage and support than adhesive solutions and ensures you feel comfortable and confident on your special day.
Affordable Wedding Dresses: Spending Less Than $1000
You may want to see also
Frequently asked questions
This is a common issue, and there are several solutions you can try. You could use booby tape, sew cups into the dress, wear a strapless bra, or opt for a dress with a built-in corset.
Booby tape is a type of adhesive tape that can be used to support your bust and lasts all day. It can be used in combination with an old bra, with one longer piece going from the underbust over the nipple towards the shoulder, and a few shorter pieces on the sides of the bust.
If you are unable to go braless, there are a few options for bras that can be worn with backless dresses. You could try a low back strapless bra, or a backless strapless longline bra.
If you can't find a bra that fits, you could try having cups sewn into the dress. However, this may not provide enough support for larger busted women. In this case, you may need to look for a dress with boning or a built-in bra.
Yes, there are several other dress styles that can accommodate a large bust. You could try a strapless dress, a wrap dress, or a dress with a high neck. These styles can provide more support and coverage than a backless dress.
