Rhiannon Hendricks
Adding a sash to your wedding gown is a great way to emphasise your waistline and add a touch of glamour and colour to your bridal look. You can make your own wedding gown sash by following these simple steps. First, decide on the type of sash you want to make – a fitted sash with a fastening at the back or a bow-tying sash. Next, choose your materials, keeping in mind that the length of the fabric should be at least 2 metres, and the width should be between 1.5 and 3 inches. Popular fabrics for bridal sashes include satin, silk, charmeuse, and tulle, often in colours like rose gold, ivory, and white. You can then embellish your sash with rhinestones, beads, pearls, or a big bow. Finally, consider adding a few hand stitches to ensure that the applique stays adhered to the ribbon.
| Characteristics | Values |
|---|---|
| Sash type | Waist sash or ceremonial sash |
| Fabric | Satin, silk, silk charmeuse, duchess satin, tulle |
| Fabric colour | Rose gold, ivory, white |
| Width | 1.5–3 inches |
| Length | 80–160 inches |
| Style | Fitted or bow-tying |
| Fastening | Hook and eye, velcro, snaps, buttons |
| Embellishments | Rhinestones, crystals, beads, pearls, flowers |
Explore related products
What You'll Learn
Choosing the right fabric
The type of fabric you choose for your wedding gown sash is important, as it can add colour, sparkle and personality to your wedding ensemble. The right fabric will also ensure your sash has a good drape.
The most popular fabrics for bridal sashes are satin, silk and tulle. Satin ribbon is a common choice, but it needs to be of top quality to avoid puckering and looking bad. Satin and silk fabrics are more substantial options.
If you're looking for a colourful sash, consider a bold sash with colourful floral details. Or, for something more classic, a white floral sash adds a romantic vibe. For a non-traditional look, a sash featuring peacock feathers gives a classy, vintage feel and can be paired with other types of feathers.
For a simple sash, a plain ribbon in a shade that complements your colour scheme is a good option. If you want something more detailed, you could choose a sash with rosettes, feathers, rhinestones, beads, pearls, or crystals.
If you're looking to incorporate "something blue" into your wedding ensemble, you could choose a sash with small blue gemstones or beading, or one with delicate blue embroidery.
Creating a Wedding Slideshow: Free, Easy, Musical
You may want to see also
Explore related products
Selecting the right length
The length of your wedding gown sash is important to get right, as it will ensure your sash sits neatly and securely around your waist. The length of a sash can vary, but typically, they range from 80 inches to 160 inches.
To determine the right length for your sash, you should first measure your waist. For a fitted sash, add 1.5 inches to your waist measurement to get the length of fabric you need to cut. This extra length will ensure you have enough fabric to stitch the sash together and account for the seam allowance.
If you prefer a bow-tying sash, you will need a longer length of fabric, around 2.25 meters, to create a decent bow with tails. The longer the length, the more tails you will have after tying the bow.
It is also important to consider the width of your sash. Most sashes are between 1.5 and 3 inches wide, but you can opt for a wider sash depending on your personal preference and body shape.
Crafting a Wedding Event Proposal: A Guide to Success
You may want to see also
Explore related products
Using glue or hand-stitching
Making your own wedding gown sash is a fun and rewarding project that allows you to personalize your outfit. Here is a step-by-step guide on how to make a sash and attach it to your gown using glue or hand-stitching:
Step 1: Choose the Fabric and Measurements
Select the fabric for your sash, considering the colour, texture, and weight to complement your wedding gown. Popular choices include satin, silk, chiffon, or organza. Measure your waist or the desired length of the sash, adding a few extra inches for tying a bow. Determine the width of your sash, typically ranging from 1.5 to 3 inches, or wider depending on your preference.
Step 2: Cut and Prepare the Fabric
Using sharp fabric scissors, cut the fabric according to your desired measurements. If you want clean, finished edges, fold the fabric inwards about half an inch on all sides and secure the folds with pins.
Step 3: Embellish Your Sash (Optional)
Now is the time to attach any desired embellishments like rhinestones, crystals, beads, sequins, or lace. You can sew or glue these onto the sash to create a unique design. If you plan to add embellishments, it's a good idea to sketch out your design beforehand.
Step 4: Finish the Sash
Once the sewing and embellishing are complete, remove any remaining pins and press the sash with an iron to remove wrinkles.
Step 5: Attach the Sash to Your Gown
You can attach the sash to your wedding gown using either glue or hand-stitching:
Using Glue:
- Place a piece of wax paper under your ribbon to prevent it from sticking to the work surface.
- Apply a strong fabric glue, such as E600 Glue, to the back of your embellishments.
- Press the embellishments firmly onto the desired area of your wedding gown, holding them in place for a few seconds.
- Allow the glue to dry completely, following the instructions on the package.
Hand-Stitching:
- Thread a needle with a colour that matches your sash fabric.
- Knot the end of the thread and, starting from the back of your wedding gown, push the needle up through the fabric to the front.
- Place your sash where you want it on the gown and stitch through both the gown and sash fabric, following the desired pattern (e.g. running stitch, backstitch, or slipstitch).
- Secure the thread by stitching back through the same holes and knotting the thread at the back.
Your wedding gown sash is now complete and ready to be shown off at your special event!
Creating a Delicious Wedding Cake, Amma-Style
You may want to see also
Explore related products
Adding embellishments
There are many ways to add embellishments to a wedding gown sash. Here are some ideas:
Ready-made trims
This is the easiest option. Simply purchase a trim with rhinestones, crystals, beads, or other decorations from a sewing store and attach it to the middle of the sash with glue. Ensure that the bulk of the trim is only around the waist, leaving the tails plain so that you can tie a bow.
Fabric flowers
Fabric flowers can be made easily and add a unique touch to a plain sash. Cut three fabric circles in satin, chiffon, or tulle, with each circle smaller than the other. Use a candle or lighter to singe the edges of the circles, being careful not to burn them. Stack the circles on top of each other, add small beads in the centre, and stitch them in place. Stitch the flowers to the sides or centre of the sash, and add beads, sequins, or other trims for extra embellishment if desired.
Big bow
Decorate your sash with a big bow, either at the back of a fitted sash or the front of a ribbon sash. You can also add bead edging to the edges of the sash belt, ensuring that the beading does not extend beyond the waistline.
Lace
Cut out pieces of lace to the length of half your waist measurement and stitch them to the edges of the sash.
Rhinestones, sequins, or beads
Add some extra sparkle to your sash by gluing or sewing on rhinestones, sequins, or beads. If gluing, use waxed paper underneath your sash to prevent it from sticking to your work surface. If sewing, consider using small stitches such as blanket stitches to secure the embellishments.
Hand stitching
Add some extra detail to your sash with hand stitching. You can stitch on rhinestones, sequins, or beads, or try simple bead embroidery.
Crafting Simple Wedding Cards: A Step-by-Step Guide
You may want to see also
Explore related products
Attaching the sash to the gown
There are several ways to attach a sash to your wedding gown. Here are some options:
Hooks and Eyes
You can attach the sash to the gown using hooks and eyes. Place the hooks and eyes on the sash and under the collar at the back of the gown. This method is especially useful if your sash is an extension of the collar, like in the example of a gown with a draping bustle.
Fastening at the Back
You can also create a fitted sash with a fastening at the back, using hooks and eyes, velcro, snaps, or buttons. Measure your waist, add 1.5 inches to that measurement, and cut your fabric to that length. For a 3-inch wide sash, cut the fabric to a width of 6.5 inches; for a 1.5-inch sash, cut it to 3.5 inches wide. Fold the fabric with the right sides together, stitch the long edges, and turn it inside out. Bind the edges with fabric strips and attach your chosen fastening.
Sewing the Sash Directly to the Gown
If you want the sash to be a permanent part of the gown, you can sew it directly to the dress. This method is often used for sashes that are an extension of the collar or waistband. However, keep in mind that this will make the sash non-detachable.
Tying a Bow
Another option is to tie the sash into a bow at the back of the gown. This can be a simple knot or a more elaborate bow, depending on your preference. If you want the sash to be removable, you can tie it in a way that allows for easy untying.
Wedding Account Checks: Ensure Your Money Is Secure
You may want to see also
Frequently asked questions
You can make two types of sashes: one that is worn around the waist and another that is worn across the body from one shoulder to the hip. This tutorial is about how to make the first type of sash.
You can use either fabric or ribbon to make a sash. If you use fabric, you will need about 2 meters of neatly finished fabric. If you use ribbon, you will need about 2 meters of 1.5–3-inch-wide ribbon. You can use satin, silk, or tulle fabric, and popular colours include rose gold, ivory, and white.
First, measure around your waist and add 1.5 inches to get the length of the fabric you should cut. The width of the fabric should be 6.5 inches for a 3-inch-wide sash or 3.5 inches for a 1.5-inch-wide sash. Cut the fabric, fold it in half lengthwise with the right sides together, and stitch the long edges together to form a tube. Turn the tube inside out, finish the ends with bias binding strips, and attach hooks and eyes or another type of fastening.
Cut a piece of fabric that is about 2.25 meters long and 6 inches wide. Fold it in half horizontally, and then fold it in half again vertically. Stitch along the edges, leaving a small section unstitched, and turn the sash right side out through the unstitched section. Embellish your sash with rhinestones, beads, pearls, or other decorations.
Cut a piece of iron-on adhesive paper the same size as your applique. Trace the applique onto the paper, cut it out, and iron it onto the back of the applique. Peel off the backing, place the applique onto the ribbon, and use a pressing cloth to iron it in place. Hand stitch the applique to the ribbon to secure it in place.
