Creating Wedding Wand Streamers: A Step-By-Step Guide

Wedding wand streamers are a fun and unique way to add a pop of colour to your wedding festivities. They are a great alternative to sparklers, confetti, glitter, or birdseed, and create a whimsical effect for your grand exit. You can easily make these wand streamers at home with some simple supplies, or you can purchase them online from sites like Etsy and Amazon. Making these wand streamers can be time-consuming, but the end result will be a beautiful and joyful addition to your special day.

Choosing the right materials

Wedding wand streamers are a fun and whimsical addition to any wedding celebration. When choosing the materials for your wedding wand streamers, there are several key components to consider. Firstly, decide on the type of wood you would like to use for the dowels. A lightweight yet sturdy option, such as wooden dowels measuring 12 inches in length and 1/4 inch in thickness, would be ideal. This ensures that your guests can comfortably hold and wave the wands without worrying about breakage.

Next, select the bells you would like to attach to the dowels. Medium-sized jingle bells or small gold bells are popular choices, adding a cheerful sound to your celebration. You can opt for bells with a louder ring or those that produce a softer, more subtle sound.

The ribbon is another important component of your wedding wand streamers. Choose colours that complement your wedding theme or colour scheme. You will need approximately 12 inches of each colour ribbon for every wand you make. Consider using a mix of solid colours and patterns, such as lace or satin ribbons, to add visual interest and texture.

Additionally, you will need screw eye hooks and jump rings to connect the bells and ribbons to the dowels. The screw eye hooks should be proportional to the size of the dowels, such as 13/16 inch hooks for 1/4 inch thick dowels. The jump rings can be a standard size, such as 12mm, and are used to securely attach the bells to the screw eye hooks.

By carefully selecting high-quality materials, you can create beautiful and durable wedding wand streamers that will enhance your special day and provide your guests with a memorable send-off experience.

Attaching the bells

Once you have your bells, you will need to attach them to the end of your wooden dowel. You can use a variety of methods to secure the bells, such as jump rings, metal wire, or string. If using jump rings, simply open the ring, place the bell onto the dowel, and close the ring securely. For metal wire or string, wrap the wire or string around the bell and the dowel several times, ensuring that it is tight and secure.

You can choose to attach one or multiple bells to each wand, depending on your preference for noise and aesthetics. For a subtle sound, a single small bell will suffice. For a louder, more festive sound, you may want to attach two or more bells to each wand.

After the bells are securely attached, you can proceed to the next step of tying the ribbons to the hooks. Remember to allow enough ribbon length for your guests to be able to wave the wands with ease and create a beautiful, celebratory atmosphere at your wedding!

Cutting the ribbons

Now for the fun part: cutting the ribbons! You'll need 12 inches of each colour for each wand you plan to make, so multiply the number of wands by 12 to get the total amount of ribbon you'll require in each colour.

Before you start cutting, decide on the colours you want for your wands and how many of each colour you'll need. This will help you determine the length of ribbon you'll need to cut.

Once you're ready, start by measuring out 12-inch lengths of ribbon. You can use a ruler or a measuring tape to ensure accuracy. After measuring, use a pair of sharp scissors to cut the ribbon. Cut slowly and carefully to avoid any uneven edges or fraying. Repeat this process until you have the desired number of ribbons in each colour.

Now that you have all your ribbons cut to size, it's time to move on to the next step of assembling your wedding wand streamers!

Tying the ribbons

To attach the ribbons, simply tie them to the hooks. You can use a variety of knots, such as the classic knot, the bunny ears knot, or the double bunny ears knot. If you're feeling creative, you can even try a different type of knot for each wand, adding a unique touch to your streamers.

For a classic knot, follow these steps:

• Place the ribbon over the hook with equal lengths on each side.
• Take the right strand and bring it over and under the left strand, creating an "X".
• Pull the right strand under and through the loop created by the "X".
• Tighten the knot by pulling on both ends of the ribbon.

For a bunny ears knot, follow these steps:

• Create a loop with one strand of the ribbon, holding it with your thumb and index finger.
• Wrap the other strand around the first loop, then pass it through the loop.
• Pull both ends of the ribbon to tighten the knot.

The double bunny ears knot is similar, but you will create two loops with the ribbon instead of one. This creates a larger, more decorative knot.

Once you have tied all the ribbons, your wedding wand streamers are ready to be waved and enjoyed!

Adding extra decorations

Wedding wand streamers are a great way to add a whimsical and festive touch to your wedding celebrations. While they are relatively easy to make, they can be time-consuming, so it's important to plan ahead. Here are some ideas for adding extra decorations to your wedding wand streamers:

Ribbons and Bows:

Use a variety of ribbon colours and textures to create a unique and eye-catching display. Consider using satin, silk, or velvet ribbons in different widths and lengths. You can also add bows or tie the ribbons in bows around the wand. This will create a more voluminous and textured look.

Bells:

Attaching bells to the end of the wand is a great way to add a cheerful sound to your wedding wand streamers. You can find bells in different sizes and colours to match your wedding theme. If you're looking for a more subtle sound, opt for smaller bells. You can also paint the bells to match your colour scheme.

Lace and Fabric:

Incorporate lace or fabric into your wedding wand streamers by wrapping it around the wand or using it as an accent. This can add a vintage or rustic touch to your decorations. Consider using fabrics such as tulle or organza for a softer, more romantic look.

Fairy Lights:

For an evening wedding, consider adding fairy lights to your wedding wand streamers. You can wrap the lights around the wand or incorporate them into the ribbons. This will create a magical and sparkling effect. Just make sure the lights are safe to use and won't cause any hazards.

Personalised Tags:

Add a personalised touch to your wedding wand streamers by attaching tags with your names, wedding date, or a special message. These tags can be made from paper, cardboard, or even wood. You can also include a ribbon or string so your guests can easily wave the wands.

Flowers and Greenery:

Incorporate fresh or artificial flowers and greenery into your wedding wand streamers. You can attach small bouquets or individual flowers to the end of the wand, or wrap the stems with ribbon. This is a great way to tie in your wedding colours and theme.

Remember, when adding extra decorations, it's important to consider the overall weight and balance of the wand. You want to make sure it's still comfortable for your guests to hold and wave. Enjoy creating these magical wedding wand streamers!

Frequently asked questions