Creating Church Pew Wedding Flowers: A Step-By-Step Guide

Wedding flowers for church pews are an easy and beautiful DIY project that can add a pop of colour to your wedding ceremony. You can make your own using fabric tulle, flowers of your choice, and white ribbon, or you can buy pre-made options online. If you're making your own, first cut the tulle into multiple pieces that measure 7 1/2 ft long, then cut the flowers from their bunches. Next, wrap the bottom of the flowers with ribbon, before grabbing your cut tulle and completely opening it up while ruffling. Fold the tulle in half, leaving an open space at the top to thread ribbon through for hanging. Set the flowers about 1 inch above this space, then tie a 5 ft ribbon around the back of the tulle, bringing it towards the front. Finish with a bow or a knot, then thread a shorter piece of ribbon through the top space and make a knot. If you'd rather buy pre-made options, you can find a range of floral arrangements and decorations online, including silk flowers, artificial floral arrangements, and flower holders.

Choosing flowers and colours

Flower Types

When selecting flowers for your church pew decorations, it's essential to consider the availability and seasonality of the blooms. If you have a favourite flower in mind, check if it is in season around your wedding date. Using seasonal flowers can often be more cost-effective and environmentally friendly. Some popular flower choices for wedding pews include:

• Roses: Classic and elegant, roses come in a wide range of colours and can be easily combined with other flowers or used on their own.
• Peonies: These lush, romantic blooms have a short season in late spring to early summer but make a stunning addition to wedding florals.
• Baby's Breath: Also known as gypsophila, baby's breath has small, delicate white flowers that can be used to create airy, whimsical arrangements.
• Tulle: While not a flower, tulle fabric is often used in wedding pew decorations to create bows, draping, or as a base for floral arrangements.

Colour Schemes

The colour scheme you choose for your wedding flowers will depend on your personal preference and wedding theme. Here are some tips to consider:

• Monochromatic: Using varying shades, tints, and tones of a single colour can create a cohesive and elegant look. For example, a blush and ivory combination, as seen in the Ling's Moment set of eight wedding aisle marker pew flowers.
• Complementary Colours: Using colours opposite each other on the colour wheel can create a vibrant and eye-catching contrast. For instance, pairing burgundy with blush or green with white, as suggested in some Etsy listings.
• Analogous Colours: Choosing colours that are next to each other on the colour wheel can create a harmonious and soothing effect. For a subtle and elegant look, you could opt for analogous colours like white and green or blush and peach.

When choosing your flowers and colours, it's important to consider the overall aesthetic of your wedding and the availability of certain blooms during your wedding season. You can opt for fresh flowers or high-quality artificial flowers, depending on your budget and preference. Remember to have fun and get creative with your choices!

Selecting the right fabric

When selecting the right fabric for your wedding flowers for church pews, there are a few things to consider. The type of fabric you choose will depend on the overall look you are going for, as well as your budget and the amount of time you have to dedicate to this project.

One popular option is tulle fabric, which can be used to create beautiful, elegant bows that will adorn your church pews. Tulle is a lightweight, delicate fabric that is easy to work with and can be purchased in a variety of colours to match your wedding theme. It is also relatively inexpensive, making it a budget-friendly option. To make tulle pew bows, you will need a significant amount of fabric, approximately 120 feet, as well as additional decorations such as flowers and ribbons.

Another option is to use chiffon fabric, which is a lightweight and sheer material that adds a touch of elegance to your wedding décor. Chiffon is often used as chair sashes or drapes, and it can be paired with artificial flowers and ribbons to create a stunning display. This fabric is also available in a wide range of colours, allowing you to match your wedding colour scheme.

If you're looking for something more unique, you can even find pre-made pew flower decorations made with silk-like ribbons and artificial flowers. These can be purchased online and simply hung on the chairs or pews, saving you time and effort.

When selecting your fabric, consider the overall theme and colour scheme of your wedding, as well as the level of formality. If you're having a rustic or boho-themed wedding, for example, you might want to opt for more natural-looking fabrics and colours, such as burlap or natural-toned ribbons. For a more formal or elegant affair, satin or silk fabrics in classic colours like ivory or blush might be more suitable.

In addition to the type of fabric, you will also need to consider the amount of fabric required. Measure your church pews beforehand to ensure you purchase enough material. It is always better to have a little extra fabric than not enough, as you can always get creative and use any leftovers for additional decorations.

Cutting the flowers and fabric

To make wedding flowers for church pews, you will need fabric tulle, flowers of your choice, and white ribbon. The first step is to cut the tulle into multiple pieces that measure 7 1/2 ft long. You will then need to cut the flowers from their bunches. Next, cut the ribbon into two different sizes: 14 pieces of ribbon should be 5 ft long, and 14 should be 1 1/3 ft long. Wrap the bottom of the flowers with the ribbon, and cut off the stems if you wish.

Now, take the cut tulle and completely open it up, ruffling it as you go. Fold the tulle in half, leaving an open space at the top where you will later tie the ribbon to hang your decoration. Place the flowers about 1 inch above this open space. Take one of the 5 ft pieces of ribbon and tie it around the back of the tulle, bringing it towards the front. You can either create a nice bow at the front or simply make a knot. Finally, grab one of the shorter pieces of ribbon and loop it through the top space, making a knot towards the top. And there you have it—a beautiful floral pew decoration!

Arranging the flowers and fabric

Firstly, you will need to cut your chosen fabric into multiple pieces that measure 7 1/2 ft in length. For this example, we will use tulle, but you can choose any fabric that suits your theme. Next, take your flowers and cut them from their bunches. You will need to wrap the stems with ribbon, or you can cut the stems off completely. If you opt to keep the stems, use a longer piece of ribbon to wrap around the stems, then bring it towards the front of the flower, creating a bow or a knot.

Now, take your cut fabric and open it up fully, ruffling it as you go. Fold it in half, leaving a small open space at the top—this is where you will attach the ribbon to hang your decoration. Place your flowers about 1 inch above the open space.

Take a 5-foot length of ribbon and tie it around the back of the fabric, bringing it towards the flowers. You can create a bow or a simple knot. Finally, take a shorter length of ribbon (around 1 foot) and loop it through the top open space, tying a knot at the top.

You can hang these decorations on the pews using a clear plastic clip, or a custom brooch.

Attaching the flowers to the pews

Firstly, you will need to gather your materials. For this method, you will need fabric tulle, flowers of your choice, and white ribbon in two different lengths. The ribbon should be cut into two sizes: 5 feet and 1.3 feet. You will need 14 of each size.

Next, prepare your flowers by cutting them from their bunch and wrapping the bottom of each flower with ribbon. You may also choose to cut off the stems completely. Then, cut your tulle into multiple pieces, each measuring 7.5 feet in length.

Now, take a piece of tulle and completely open it up, ruffling it as you go. Fold the tulle in half, leaving an open space at the top. This opening is where you will eventually tie the ribbon to hang your decoration, so be sure to leave enough space.

Place your flowers about 1 inch above the open space. Take one of the 5-foot ribbons and tie it around the back of the tulle, bringing it towards the front where the flowers are. You can create a bow or simply knot the ribbon.

Finally, take the shorter ribbon (1.3 feet) and loop it through the top opening. Make a knot towards the top of the ribbon, and your decoration is ready to be hung!

Another method for attaching flowers to pews is by using clips. You can purchase heavy-duty plastic clips designed specifically for this purpose. These clips can be used to secure bows, flowers, signs, garlands, or other decorations to the pews.

If you are looking for a more elegant solution, consider using flower holders with pew clips. These can be attached to the pews, and the flowers can be placed in the holders. This is a more secure option and is ideal if you want to display fresh flowers in vases.

Attaching flowers to church pews can be a simple and fun DIY project. By following these steps, you will be able to create beautiful and elegant decorations for your wedding ceremony.

Frequently asked questions