Guide To Making Wedding Chair Tie Backs

Wedding chair tie-backs can add a delightful and whimsical touch to your big day. There are several ways to tie a wedding chair bow or sash, and the right style for you will depend on the effect you want to create, as well as the material and colour of your sashes. This introduction will take you through five popular ways to tie a wedding chair bow or sash, including the classic bow, the flip tie, the side bow, the rosette, and the double wrap knot.

Classic bow tie: a convenient, easy-to-untie knot with loops

The classic bow tie is a convenient and easy-to-untie knot with loops that can add delight and whimsy to your wedding chairs and chair covers. Here is a step-by-step guide on how to create this timeless look:

Firstly, place the sash around the front of the backrest of the chair, ensuring that the centre of the sash is at the middle of the backrest and that the ends are even behind the chair.

Next, tie a half knot by crossing the two pieces of the sash and flipping one end under the other. Pull the ends in opposite directions to tighten the knot across the back of the backrest.

Now, you will create the second half of the knot by forming two loops. With one hand, form a loop, and do the same with the other hand.

Then, tie the loops together. Cross the two loops, and thread the front loop behind and under the back loop. Pull the front loop through the hole created by the crossing, and pull tight.

To help the bow hold its shape, you can flip the direction of the bows and pull the top and bottom edges of each loop away from each other.

Finally, if you wish, you can add a velcro bow cover for some extra sparkle.

And there you have it—a classic bow tie for your wedding chair, which is not only convenient but also easy to untie!

Flip tie: a modern twist on the classic bow, with a single loop

The flip tie is a modern take on the classic bow, with a single loop that gives your wedding chairs a stylish and elegant look. It is easy to create and works with any type of fabric and chair, making it a convenient choice for your special day. Here is a step-by-step guide to creating the perfect flip tie:

Firstly, start by placing the sash around the front of the chair's backrest, ensuring that the centre of the sash is at the middle of the backrest and the ends are even behind the chair. This forms the base for your flip tie.

Next, tie a half knot by crossing the two pieces of the sash and flipping one end under the other, pulling them tight in opposite directions. This will secure the sash to the chair and create a neat finish.

Now, instead of creating two loops for a classic bow, you will form a single loop with one hand. Take the long piece of sash in your other hand and wrap it in front and then around the loop. Pull the end through the hole created by the wrapped piece and tighten it. This creates the unique single loop of the flip tie.

Adjust the hanging sash ends so that the longer flap is in front. Then, pull both sash ends up and under the knot, bringing them over to hide the knot. This step ensures a neat and tidy finish to your design.

Finally, flip the ends up and over as many times as you desire to achieve your preferred length and style. You can play around with the number of flips to create different looks and add your own personal touch.

The flip tie is a quick and easy way to decorate your wedding chairs, taking less than 30 seconds per chair. It is a modern and elegant alternative to the classic bow, and with its single loop, it is also easy to break down after your event.

Side bow: a centred bow on the side of the backrest

The side bow is a variation of the classic bow tie, placed on the side of the backrest instead of the centre. This style suits modern wedding themes and can be dressed up with flowers or a velcro bow cover for extra sparkle.

To create this look, start by placing the centre of the sash on the side of the backrest, ensuring the ends are of even length in front of you. Then, follow the instructions for the classic bow tie.

Classic Bow Tie:

• Place the sash around the front of the backrest, ensuring it is centred and the ends are even behind the chair.
• Tie a half knot by crossing the two pieces of the sashes, flipping one under the other, and pulling in opposite directions to tighten across the back of the backrest.
• Create the second half of the knot by forming a loop with each hand and crossing the two loops.
• Thread the front loop behind and under the back loop, pulling it through the hole created by the crossing, and tighten.
• To help the bow hold its shape, flip the direction of the bows and pull the top and bottom edges of each loop away from each other.

You can also create a bow with shorter hanging ends by wrapping the sash around the backrest twice instead of once. This variation is perfect for a modern look and can be achieved in a few simple steps.

Rosette: a time-consuming knot with a two-strand twist effect

The rosette is a beautiful knot that will add a touch of sophistication to your wedding chair decorations. It is a time-consuming knot, so it is recommended for smaller weddings with fewer guests. Here is a step-by-step guide on how to create this elegant knot:

Firstly, place the sash over the front of the chair's backrest, ensuring that the ends are even at the back. Then, tie a half knot by crossing the two pieces of the sash and flipping one end under the other. Pull them tight. Repeat this process to form a second knot.

Now, take the two ends and cross them over each other, pulling tight. Repeat this process, forming a two-strand twist effect, continuing three-quarters down the length of the sash ends. Secure the twist with a knot.

Next, twist the two-strand twist counterclockwise until it begins to buckle and curl in on itself. As it does, follow the natural bends and begin to wrap the material around the knot on the backrest to form the rosette.

Finally, when you reach the end of the sash, tie it off and allow any remaining material to hang down gracefully. You can secure the rosette further by tucking the ends neatly behind the sash or using a small safety pin.

The rosette knot is a stunning choice for your wedding chair tie backs, adding a unique and elegant touch to your special day.

Double wrap knot: a variation of the classic bow with an extra sash wrap

The double wrap knot is a variation of the classic bow tie with an extra wrap around the backrest of the chair. It gives a more interesting look to the chair with the crossed sash in front and a larger swatch of colour. It is also a great option for satin bows as the reduced length of the ends helps the bow loops retain their shape.

To create this knot, start by placing the centre of the sash around the low back of the backrest, about 3 inches from the seat of the chair. Cross the sashes in front and pull them around to the back, forming diagonal crossed sashes. Instead of tying your knot over the low piece of the sash, tie it higher up on the backrest to create variation.

Now, tie your classic bow tie. First, make a half knot by crossing the two pieces of the sashes and flipping one under the other, pulling in opposite directions to tighten across the back of the backrest. Next, start to create the second half of the knot by forming a loop with one hand and another loop with the other. Tie these loops together by crossing them and threading the front loop behind and under the back loop, pulling it through the hole created by the crossing. Pull tight.

Finally, if you like, add a velcro bow cover for some extra sparkle.

Frequently asked questions