George Boyle
There are many reasons why a wedding band may not fit as well as it should, from weight fluctuations to the weather. If your wedding band is feeling a little loose, there are several ways to make it fit tighter. You could try a temporary solution, such as a plastic ring adjuster, or a more permanent fix by taking it to a jeweller. A jeweller can resize your ring by cutting a chunk of the band and welding it back together, or they can add sizing beads or a spring insert to the inside of the band.
| Characteristics | Values |
|---|---|
| When to resize a ring | If the ring is too loose, it might fall off and get lost. If it's too tight, it can be uncomfortable and cut off circulation. |
| When not to resize a ring | If the ring is a family heirloom or has a special engraving, resizing may be risky or impossible. |
| Temporary solutions | Plastic ring adjusters, string or yarn wrapped around the base of the ring, tape, liquid guard, food-grade silicone, sizing beads, a spring insert, a fold-over device/sizing bar |
| Jeweler-applied solutions | Sizing beads, a spring insert, a fold-over device/sizing bar |
| Ring sizers to avoid | Tape, liquid guard, food-grade silicone |
| Factors that can affect ring fit | Time of day, diet, weather, weight fluctuations, pregnancy, arthritis, other health conditions |
Sizing beads
The process of soldering sizing beads to a ring band does not affect the exterior design, but it is not compatible with all types of metal. Sizing beads cannot be used on rings made of ceramic carbide, tungsten, or titanium, as these metals do not react to the soldering process. Additionally, certain colored coatings on bands may be flammable and may change color or react oddly to the soldering process. The process can also burn costume jewelry if the base metal is weak or if the stones are made of plastic or glass.
If you are considering sizing beads for your wedding band, it is important to consult with a professional jeweler to ensure that this method is suitable for your ring and to get an accurate quote for the cost and turnaround time.
Crafting a Wedding Ladder: A Step-by-Step Guide
You may want to see also
Fold-over device
A fold-over device is a last resort for those whose knuckles are significantly larger than their fingers, and stabilising balls are not enough to aid with ring slippage.
A fold-over device is a U-shaped bar that a jeweller solders across the bottom of the ring. It has a hinge on one side and a latch on the other. To use it, you simply open the latch to put the ring on and then swing it shut to hold the ring in place. This method can resize rings by several full ring sizes. It is also typically reported as comfortable.
A fold-over device is a good option if you don't like the idea of squeezing your finger through your ring to get it past your knuckle. It is also a good option if you want to avoid resizing your ring, as resizing can negatively affect the strength of the metal.
Before opting for a fold-over device, it's worth considering the circumstances under which your ring was first fitted. For example, if you were pregnant at the time, this could have caused your ring to fit more snugly. It's also worth considering whether temporary factors, such as cold weather or weight loss, could be causing your ring to fit more loosely.
Create Fragrant Pomander Balls for Your Wedding Day
You may want to see also
Ring snuggie
If you are looking for a more permanent solution to a loose-fitting ring, you may want to consider getting it resized by a professional jeweler. This typically involves cutting a chunk of the band and welding it back together to make the ring smaller.
Creating Edible Wedding Rings: Hard Tack Candy
You may want to see also
Spring insert
A spring insert is a great way to make your wedding band fit tighter without having to resize the ring itself. This is especially useful if you only need to make the ring slightly smaller, or if you don't want to permanently resize the ring.
A spring insert is a semi-permanent solution to making a ring fit tighter. It is a U-shaped or horseshoe-shaped thin, flexible bar that goes across the bottom 3/4 of the inside of the ring band. The insert is typically made of white gold, but can also be made of other metals. The insert springs open slightly to allow the ring to get past your knuckle, and then springs back to fit snugly at the base of your finger. This makes it a perfect solution for those with larger knuckles, as you can choose a ring size that fits over your knuckle, and the spring insert will ensure a tighter fit at the base of your finger.
If you need to remove a spring insert, simply return to your jeweller. They will be able to remove the insert and restore your ring to its original size.
Creating a Rustic Wooden Backdrop for Your Wedding Day
You may want to see also
Food-grade silicone
First, clean the inside of your ring with rubbing alcohol. This will ensure that the silicone adheres properly to the ring. Then, get a small applicator, such as a popsicle stick, to apply the silicone. Smear a thin layer of silicone adhesive on the inside of the ring, opposite the setting, and apply a small portion to the sides as well. Smooth the adhesive over the shank to make it even, and use a paper towel to gently wipe off any excess adhesive that may have gotten on the outer layer of the ring.
Leave the silicone to cure and dry completely. The curing time will usually be indicated on the product's packaging. Wait until the silicone is fully cured and transparent-looking before wearing the ring. If you start wearing the ring before it's fully cured, the silicone coating might come off after a few days. If the ring still doesn't fit as desired, you can always apply an extra coat of the adhesive.
Creating Sweet Trees for Weddings: A Step-by-Step Guide
You may want to see also
Frequently asked questions
There are a few options to make your wedding band fit tighter. You can get it resized by a professional jeweller, who will cut out a piece of the band and solder it back together. Alternatively, you can ask a jeweller to add sizing beads or "speed bumps" to the inside of your ring, which will help the ring stay in place. If you need a temporary solution, you can try a ring guard or use a piece of string or yarn wrapped around the base of the ring.
If your wedding band is too tight, you can get it resized by a professional jeweller. They will cut the band and add in an extra piece of metal to increase the size. If you only need to go up by half a size, the jeweller may be able to stretch the metal of the band instead.
The fit of your wedding band can change depending on the weather or other normal bodily fluctuations. For example, your fingers may be more swollen early in the morning or late at night, or after eating a high-salt meal. The width of the band will also affect the fit, with wider bands feeling tighter even if the inner diameter is the same.
