Creating Wedding Mesh Bows: A Step-By-Step Guide

Wedding decorations can be expensive, but you can save money by making your own mesh bows to add a creative and personal touch to your special day. Mesh bows are easy to make and can be used to decorate a variety of items, including wreaths, gifts, and even wedding chairs and pews. All you need is some mesh ribbon, scissors, and wire or string to tie off the bow. You can also add flowers or other decorations to make your bow more elegant and festive. Making your own wedding decorations is not only a fun project but also a great way to save money and create a unique atmosphere that you and your guests will always remember.

How to make mesh bows for wedding chairs

Materials:

• Mesh ribbon
• Scissors
• Lighter
• Hot glue gun (optional)
• Other decorations (optional)

Step 1: Measure and Cut the Mesh Ribbon

First, you will need to measure the size of the chairs to determine the length of mesh ribbon required. Call your rental company to obtain the measurements, or measure the chairs yourself. Decide whether you want to create a bow or a knot and calculate how much ribbon you will need. Cut the mesh ribbon to the desired length, allowing for some extra length for tying the bow.

Step 2: Seal the Ribbon Ends

Use a lighter to carefully seal the ends of the mesh ribbon to prevent fraying. This will ensure that your bows look neat and tidy.

Step 3: Create the Bow

Take the cut ribbon and wrap it around the chair at the desired height. If you are creating a bow, tie a single knot and then form two loops with the ribbon. Cross the right loop around the left loop in a clockwise direction and then bring it through the back to create the bow. Adjust the size of the bow to fit the chair back, ensuring it is centred.

Step 4: Secure the Bow (optional)

If you wish to secure the bow further, you can use a hot glue gun to glue the centre of the bow to the chair. Alternatively, you can use other decorative elements such as faux flowers, brooches, or crystals to hide the centre of the bow and add a unique touch.

Step 5: Trim the Ribbon Ends (optional)

Depending on the desired look, you can trim the ribbon ends that hang down the chair to your preferred length.

Tips:

• Keep an eye out for sales on mesh ribbon at craft stores to save money.
• Prepare the bows ahead of time and transport them to your venue in clearly labelled boxes to reduce setup stress on the day of the wedding.
• If you have a large number of guests, consider only putting bows on a select number of chairs, such as those down the centre aisle, to save on costs.

Using mesh bows to decorate wedding pews

Making your own wedding decorations is a fun and creative way to add a personal touch to your big day. Mesh bows are a great option as they are easy to make, inexpensive, and can be customised to fit your wedding colour scheme.

Materials

To make mesh bows for your wedding pews, you will need:

• Mesh ribbon in your chosen colour(s)
• Complimentary ribbon
• Scissors or a rotary cutter
• Floral wire
• Flowers or other decorations (optional)

Step-by-Step Guide

Step One: Cut Your Mesh Ribbon

First, cut your mesh ribbon into strips. For a medium-sized bow, cut 3-5 strips of 8-inch mesh ribbon. If you want a bigger bow, cut longer strips or use more strips of mesh ribbon.

Step Two: Cut Your Coordinating Ribbon

Cut a piece of coordinating ribbon slightly shorter than your mesh ribbon strips. This ribbon will be used to secure the centre of the bow.

Step Three: Roll the Mesh Ribbon

Roll each strip of mesh ribbon into a roll. The mesh will naturally want to roll up, so this step should be easy!

Step Four: Layer the Bow

Pinch each strip in the middle and criss-cross the mesh ribbon back and forth in layers until you have used all the rolls. Keep the centre of the rolls tight between your thumb and hand.

Step Five: Secure the Bow

Place the coordinating ribbon strip on top of the bundle you are pinching and use a zip tie or floral wire to secure the centre of the bow.

Step Six: Fluff the Bow

Fluff out each piece of mesh ribbon to create a full and fluffy bow.

Step Seven: Attach to the Pew

Finally, attach the bow to the pew. Most pews have a place to loop the ribbon, so simply loop your coordinating ribbon through this space and adjust the bow as needed.

Customisation

You can customise your mesh bows by adding flowers, baby's breath, or other decorations. Simply secure these to the centre of the bow with floral wire. You can also experiment with different types and sizes of ribbon to create unique and beautiful decorations for your wedding pews.

Making mesh bows for wedding favours

Making bows is a great way to add a personal touch to your wedding favours. Using mesh ribbon is not only easy but also inexpensive. You can make the bows in different sizes and colours to decorate your wedding favours. Here is a simple guide to making mesh bows for wedding favours.

Materials

You will need the following materials:

• Mesh ribbon (6" or 10" deco mesh rolls)
• Complimentary ribbon
• Scissors
• Floral wire

Step-by-Step Guide

Step 1: Cut the Mesh Ribbon

First, cut your mesh ribbon into strips. Each strip should be around 8" long. You will need 3 to 5 strips for each bow.

Step 2: Cut the Coordinating Ribbon

Cut a slightly shorter piece of coordinating ribbon. It should be about half an inch shorter than the mesh ribbon.

Step 3: Roll the Mesh Ribbon

Roll the mesh ribbon strips into rolls. The mesh will naturally want to roll up, so this step should be easy.

Step 4: Layer the Bow

Pinch each strip in the middle and criss-cross the mesh ribbon back and forth in layers until you have used all the rolls. Keep the centre of the rolls tight between your thumb and hand.

Step 5: Secure the Bow

Place the coordinating ribbon strip on top of the bundle you are pinching in your hand. Then, use a zip tie or floral wire to secure the pinched bundle of ribbons in the centre.

Step 6: Fluff the Bow

If you are using a zip tie, simply fluff out the mesh ribbon to form the bow. If you are using floral wire, twist the wire tightly and fluff out the mesh ribbon to create a full, fluffy bow.

Your mesh bow is now ready to be attached to your wedding favours! You can also add a bit of ribbon or string to the back of the bow to make it easier to attach.

Creating mesh bows for wedding wreaths

Making a bow is a great way to add a finishing touch to your wedding wreaths. Using mesh ribbon is super easy and inexpensive! You can make bows for wreaths, gifts, or even as decorations on your Christmas tree. Here is a step-by-step guide to creating mesh bows for wedding wreaths:

Step 1: Gather your supplies

You will need mesh ribbon in your desired colour, scissors or a rotary cutter, and a complementary ribbon. You can find these supplies at craft stores or online.

Step 2: Cut your mesh ribbon

Cut your mesh ribbon into strips. For a fuller bow, cut 5 strips, each about 8 inches long. You can adjust the size of your bow by cutting longer or shorter strips.

Step 3: Cut your complementary ribbon

Cut a slightly shorter piece of complementary ribbon. This ribbon will be used to secure the centre of your bow. Cut it about half an inch shorter than your mesh ribbon strips.

Step 4: Roll the mesh ribbon

Roll each strip of mesh ribbon into a roll. The mesh will naturally want to roll up, so this step should be easy!

Step 5: Layer the bow

Pinch each strip in the middle and criss-cross them back and forth in layers until you have used all the rolls. Keep the centre of the rolls tight between your thumb and hand.

Step 6: Secure the centre

Place the complementary ribbon strip on top of the bundle you are pinching and secure it with a zip tie or floral wire. You can also use string or wire if you prefer.

Step 7: Fluff the bow

Fluff each piece of mesh until you have a nicely formed bow. You can attach this bow to a wreath, gift bag, or present. Get creative with how you use your pretty bow!

Tips:

• You can adjust the size of your bow by using longer or shorter strips of mesh and changing the number of strips you cut.
• Try using different colours or patterns of mesh ribbon to create unique and personalised bows.
• Practice makes perfect! Don't be discouraged if your first bow doesn't turn out exactly how you wanted. Keep trying, and you'll be able to make perfect bows in no time!

How to make mesh bows for wedding veils

Wedding veils can be expensive, so making your own is a great way to save money and add a personal touch to your big day. Here's a step-by-step guide to making a mesh bow for a wedding veil:

Step 1: Gather Your Materials

You will need:

• Tulle (also known as netting) in the colour and width of your choice. Tulle is available in fabric stores in 72" and 108" widths. For a fuller veil, use 108" wide tulle.
• A needle and thread
• A comb or barrette to attach the veil to your hair
• Any trim, beads, or other decorative elements you want to add (optional)

Step 2: Cut the Tulle to the Desired Length

Lay the tulle out on a large table or clean floor, keeping it folded in half lengthwise. Put the folded edge nearest to you. You will now have two layers of tulle. Fold the tulle in half again, crosswise, so that you have four layers of tulle. Measure the desired length of your veil (from the top of your head down) and cut the tulle to that length, keeping it folded.

Step 3: Round Out the Corners of the Tulle

Now, round off the top left edge of the fabric by pinning it to mark the curve, then cut along the curve in a smooth motion. You can use a large serving platter or another round object as a guide. You should be left with a quarter-circle shape.

Step 4: Refold the Tulle into Veil Layers

Unfold the tulle completely so that you have one layer of tulle. Now, fold the tulle crosswise from right to left, but you don't have to bring it all the way over. You can match the ends up for a single-length veil or leave a few inches between the edges for a layered look. If you keep a shorter layer, it can be used as a blusher. Turn the veil 90 degrees counter-clockwise so that the folded edge is at the top, farthest away from you, and the open rounded edges are closest to you.

Step 5: Gather the Center of the Tulle

Decide whether you want the side edges of your veil's layers to come all the way up to the top or not. If you gather only the center portion of the tulle, the top of your veil will be less full and puffy. Gather the tulle with a needle and strong thread, weaving in and out with small stitches. Pull the thread to gather the tulle so that it is about 2 inches wide, then knot the thread securely.

Step 6: Attach the Veil to a Clip or Comb

To wear the veil, you need to attach it to something like a simple French comb, a barrette, or a headpiece. Take the gathered portion of tulle at the top center and sew it securely to your clip or comb. If you plan to wear a tiara and want to be able to remove the veil for the reception, sew the veil to a simple French comb so you can wear both pieces at once and then easily remove the veil later.

Step 7: Add Optional Ribbon Trim to Your Veil

Your veil is now ready to wear, but you may want to decorate it further. A popular option is to sew a thin satin ribbon along the edges of the veil. You can do this easily with a sewing machine and some white thread. When sewing, don't worry about getting the ribbon right up against the end of the tulle — just leave some extra ribbon and trim it later. Go back with scissors and trim the excess tulle right next to the ribbon.

Step 8: Add Optional Decorative Elements to Your Veil

You may also choose to sew or glue tiny sparkling beads or gemstones randomly onto your veil. You can also add a decorative clip at the top of your veil. Get creative and make your veil unique!

Step 9: Make Adjustments as Needed

If you are not happy with the fullness or length of your veil, you can always cut the tulle shorter or gather more or less of it to adjust the fullness. Tulle is inexpensive, so if you don't like how your first attempt comes out, you can always start over.

Frequently asked questions