Creating A Wedding Cake Stand: A Step-By-Step Guide

There are many ways to make a DIY cake stand for a wedding. You can use a variety of materials, such as wood, glass, metal, or even Lego! If you're feeling creative, you could try making a stand out of a log slice, a wire stand, or even a plate. For a more elegant look, consider using a combination of a wooden candle holder and a wooden plaque, with some chalk paint and wax to give it an antique finish. If you're looking for something simple and cheap, you could try super-gluing a plate to a candlestick, or even using a sturdy hat box.

Using a wooden log slice

A wooden log slice cake stand can add a rustic feel to your wedding. Here is a step-by-step guide to making one:

Firstly, source a suitable wood slice. You can cut your own, or you can buy pre-cut wood slices from craft and home goods stores. If you are cutting your own, ensure that the log you select is dry. Wood that is too damp can develop mould. You should also ensure that the slice is cut evenly, and that the top and bottom are parallel.

Next, prepare the wood slice. Sand the top of the wood slice until it is smooth. You can choose to sand away the bark, or leave it on. If you leave the bark on, be sure to scrub it thoroughly to remove any moss or other debris. Then, wipe the wood slice with a damp, soapy cloth and leave it to dry.

Once the wood slice is dry, you can condition it with mineral oil. Spread the oil over the top and sides of the wood slice, and quickly spread it with sandpaper. Repeat this process several times, allowing the oil to soak into the wood. Conditioning the wood slice will help it hold up to moisture.

Now it's time to assemble the cake stand. You can do this by attaching a small ramekin or ceramic bowl to the centre of the wood slice. First, clean the bowl and let it dry. Then, turn the wood slice over so that the conditioned side is facing down. Find the centre of the wood slice, and apply a strong adhesive, such as E-6000, to the bottom of the bowl. Adhere the bowl to the centre of the wood slice and let it cure according to the adhesive instructions.

Finally, turn the stand upright and check that the pieces are fully secured. If you wish, you can add a washer between the bowl and the wood slice to provide additional support.

You can decorate your cake stand by engraving a piece of leather with the happy couple's names and wedding date, and attaching it to the side of the wood slice with decorative tacks.

Your wooden log slice cake stand is now ready to use!

Creating a stand from plates and candlesticks

Firstly, source your plates and candlesticks. Thrift stores, flea markets, and local shops are great places to find unique and affordable pieces. You can also try online stores like Etsy, Goodwill, or Dollar Tree. Consider the size and weight of your cake when choosing your supplies. For a heavy, multi-tiered cake, you will need a sturdy plate, preferably with a large diameter, and a solid candlestick to support it.

Once you have your supplies, clean them thoroughly, removing any stickers and ensuring the inside of the candlestick is completely dry. This will prevent moisture from affecting the glue bond.

The next step is to assemble your stand. Place a small amount of strong glue on the top of the candlestick and press it gently into the centre of the upside-down plate. Remove any excess glue with your finger and then wipe your finger with a paper towel. You can spin the candlestick to ensure it is centred and firmly attached.

The final step is to let your stand dry completely. This may take several hours, depending on the type of glue used. Once dry, your cake stand is ready to be used or gifted!

You can decorate your stand further by painting it, adding glitter, or attaching a personalised plaque. Get creative and have fun with this project!

Making a stand from a wire hoop

A wire hoop cake stand is a great option for a wedding cake stand as it gives the effect of more space and is available in a variety of colours and heights. Here is a step-by-step guide on how to make a wire hoop cake stand for a wedding:

Materials:

• Wire hoop
• Pliers
• Floral wire
• Scissors
• Ribbon or twine
• Wooden base (optional)

Step 1:

Firstly, you will need to source a wire hoop. You can purchase one from a craft store or online, or you may be able to find one at a thrift store or flea market. The size of the hoop will depend on the size of your cake and the desired height.

Step 2:

Once you have your wire hoop, use pliers to bend and shape the wire to create a stand. You can form a simple stand by bending the wire at a 90-degree angle to the hoop, creating two straight legs that will serve as the base. You can also create a more intricate design by twisting and shaping the wire into curves or spirals.

Step 3:

If you want to add stability to the stand, especially if your cake is on the heavier side, you can attach a wooden base to the legs. Cut a piece of wood to size, sand it down, and paint or stain it to match your colour scheme. Then, use strong glue or a hot glue gun to attach the wooden base to the wire legs.

Step 4:

To add a decorative touch, you can wrap floral wire or ribbon around the hoop and stand. This will also help to cover any sharp edges or imperfections in the wire. Choose a colour or material that complements your wedding theme. You can also add embellishments like faux flowers, leaves, or beads to the wire for a more whimsical look.

Step 5:

Finally, place your cake on top of the wire hoop stand. Ensure that the cake is securely balanced and will not topple over. You may want to do a test run with a dummy cake or a lightweight object to ensure the stability of the stand.

And there you have it! A beautiful, DIY wire hoop cake stand for your wedding. This project allows for a lot of creativity and customisation, so feel free to experiment and make it your own.

For an added touch, you can also create a wire hoop backdrop for your cake display, adding a wow factor to your wedding cake presentation.

Using a bowl as a stand

Using a bowl as a cake stand is a great way to add height and drama to your wedding cake display. Here are some tips and ideas to create a stunning bowl cake stand for your special day:

Choosing the Right Bowl

Select a bowl that is wide and deep enough to comfortably fit your wedding cake. Consider the size of your cake and choose a bowl that is slightly larger to ensure that it doesn't look cramped. If you're having a multi-tiered cake, a large, shallow bowl can provide a stable base while creating a beautiful display.

Stabilising the Bowl

To ensure your cake stand is sturdy and secure, you can fill the bowl with a weighty material such as sand or rice. This will provide a solid base for your cake and prevent any accidental toppling. You can also use floral foam or styrofoam, which can be decorated or covered with fabric to match your wedding theme.

Decorating the Bowl

Decorating the bowl can add a personal touch and make it look more elegant. Consider wrapping the outside of the bowl with fabric, ribbon, or twine to match your wedding colours. You can also add decorations such as flowers, greenery, or even fairy lights to create a romantic and whimsical effect.

Combining with Other Elements

For a unique look, you can combine the bowl with other elements to create a one-of-a-kind cake stand. For example, you could place the bowl on top of a wooden slice, a stack of books, or a decorative tray. This will add height and visual interest to your display.

Using a Dipped Bowl

For a smaller cake, consider using a dipped bowl-like cake stand. This style of stand, where the bowl is tilted or "dipped" to one side, can be a unique and elegant way to display your cake. It adds a bit of whimsy and creates a dynamic visual effect.

Creating a DIY bowl cake stand for your wedding is a fun and creative way to showcase your cake. With a little imagination and some simple materials, you can make a stand that is not only functional but also adds to the beauty and charm of your special day.

Building a stand from Lego

Design and Planning:

Before you start building, it's important to have a clear idea of what you want your cake stand to look like. Consider the size and shape of the cake, as well as any colour schemes or themes you want to incorporate. You can find inspiration online or even design your own unique creation.

Gathering the Pieces:

The next step is to gather all the Lego pieces you'll need. You can purchase individual pieces or sets from Lego stores, their website, or third-party retailers. If you're looking for specific colours or rare pieces, consider using online marketplaces like BrickLink, which connect you with sellers from all over the world.

Building the Base:

The base of your cake stand should be sturdy and able to support the weight of the cake. Consider using a large grey baseplate as a foundation, and build upwards from there. You can use white Lego bricks to create a classic wedding cake look, or experiment with different colours to match your theme.

Adding Tiers:

To create a traditional wedding cake look, consider building multiple tiers. Each tier can be a separate layer of Lego bricks, stacked on top of each other and gradually decreasing in size. Ensure that each tier is securely attached to the one below it to prevent collapse.

Decorations and Details:

Add some personal touches and decorations to your cake stand. You can use flowers, hearts, or other Lego pieces to create a unique design. You can even incorporate Lego minifigures of the bride and groom, or use Lego letters to spell out your names or wedding date.

Final Touches:

Once your cake stand is built, it's time to add the finishing touches. Ensure that the stand is stable and can support the weight of the cake. You may want to test it with a dummy cake or a lightweight object to ensure it can bear the load.

Building a Lego cake stand can be a fun project for the happy couple or even a creative activity for wedding guests. It adds a unique and memorable element to your wedding day, and you can even send it home with the guests as a special souvenir.

Frequently asked questions