Creating A Bling Wedding Cake Stand: A Step-By-Step Guide

If you're looking to add some glamour to your wedding, a bling cake stand is a great way to do it. You can buy these stands ready-made, or you can make your own. To make your own, you'll need a cake form, a mirror, and some rhinestone or diamond wrap. You can even add a lazy Susan to make it rotate. If you want to go the extra mile, add some rhinestones to the cake itself using edible glue.

Using a candlestick as a base

Materials:

• One unpainted wooden candlestick (4.5″ – 10″)
• Two small unpainted wooden plaques, one 4″ wood base, and one 5″ wood base
• One large round wood plaque for the top, 8″ – 12″, 8″ wood round
• One bag of 3/8″ wooden beads
• White paint or stain and paintbrush
• Wood glue
• Polycrylic protective finish

Instructions:

• Stack the pieces and use a ruler to draw circles on the bottom piece to help you line up the pieces.
• Glue the 5″ piece to the candlestick and then glue the 4″ piece on top of that.
• String wooden beads onto a wire and measure them to fit around the bottom edge of the candlestick.
• Once you have the correct number of beads, string one side of the wire through the next bead and pull tightly.
• Lift the round wooden beads and apply wood glue, then press and hold until adhered.
• Attach the base to the top piece with wood glue.
• Add beading around all edges for a total of three.
• Once the beads are dry, remove the wire and get ready to paint.
• Apply paint thinly to all areas of the cake stand. If it’s too thick, wipe off the excess.
• Once the paint is dry, cover the stand with a polycrylic protective finish.

Your bling wedding cake stand with a candlestick base is now ready to use! You can also add some extra bling by wrapping the candlestick with faux-rhinestone or premium rhinestone diamond wrap.

Gluing a mirror to the top

To make a bling wedding cake stand, you can glue a mirror to the top of the stand to add some sparkle and glamour to your wedding cake. Here is a step-by-step guide on how to do this:

Preparing the Materials:

First, gather your materials. You will need a strong adhesive such as mirror mastic, liquid nails, or a crystal-clear adhesive like Gorilla Grab Adhesive. Ensure the glue you choose is suitable for use with mirrors, as some adhesives can damage the silver backing. You will also need a mirror, preferably a shiny acrylic mirror, and your cake stand or base.

Preparing the Mirror:

Before gluing, remove any protective plastic film from the mirror, as this will ensure a better bond and a clearer reflection. If you want to add some extra bling, consider gluing rhinestones or a rhinestone ribbon around the edge of the mirror.

Gluing the Mirror:

Now, it's time to glue the mirror to the top of your cake stand. Apply the adhesive in a zig-zag pattern to the back of the mirror or directly onto the cake stand, depending on the type of glue you are using. Place the mirror onto the stand and press down firmly for about a minute to ensure a strong bond.

Drying and Curing:

Wipe away any excess glue with a clean, dry cloth. Then, leave the glued mirror undisturbed for at least 24 hours to allow the adhesive to fully cure and set.

Final Touches:

Once the glue has dried, your bling wedding cake stand with a mirrored top is ready for use! If needed, you can wipe the mirror with a damp cloth and dry it immediately. This will help to remove any dust or fingerprints before displaying your cake.

By following these steps, you will have a sparkling and elegant cake stand, perfect for showcasing your wedding cake and adding a touch of glamour to your celebration.

Wrapping a cake form with rhinestone diamond wrap

Step 1: Gather Your Materials

You will need a cake form, which can be made from materials like styrofoam or cardboard, and a rhinestone diamond wrap. The diamond wrap can be found online and usually comes in a roll that is easy to cut and measure.

Step 2: Prepare Your Cake Form

If your cake form needs to be assembled, do so before adding the diamond wrap. Ensure that the cake form is sturdy and stable enough to hold the weight of the cake.

Step 3: Measure and Cut the Diamond Wrap

Before attaching the diamond wrap to your cake form, measure the circumference of the form to determine how much wrap you will need. Cut the diamond wrap to the desired length using scissors. You may also want to measure the height of the cake form if you plan to cover it entirely, in which case you will need to cut the diamond wrap to fit.

Step 4: Attach the Diamond Wrap

Starting at the back of the cake form, begin attaching the diamond wrap. You can use a hot glue gun to secure the wrap to the form, working your way around the circumference. If your diamond wrap has a self-adhesive backing, simply peel off the backing and stick the wrap to the form. Ensure that the wrap is smooth and securely attached as you work your way around.

Step 5: Finishing Touches

Once you have completed the first layer of diamond wrap, you can choose to add additional layers for a fuller, more dimensional look. You can also use the diamond wrap to cover the top of the cake form if desired. Finally, give your bling wedding cake stand a final once-over to ensure that all rhinestones are securely in place and that there are no gaps or loose areas.

Your bling wedding cake stand is now ready to dazzle your guests and elevate your wedding cake display!

Making it rotate with a lazy Susan

To make a rotating wedding cake stand with a lazy Susan, you can follow these steps:

First, you will need to purchase or find a suitable lazy Susan that meets your size and style requirements. The lazy Susan will serve as the base of your rotating cake stand. It should be sturdy and stable to support the weight of the cake.

Next, you will need to decide on the material and design for the top of the cake stand, which will rotate on the lazy Susan base. You can choose from various options, such as metal, wood, marble, or slate. Or, you can create your own using materials like a marble cutting board and a bowl, as suggested by The Art of Doing Stuff.

If you opt for a custom design, you will need to attach the chosen material for the top to the lazy Susan base securely. This can be done using silicone or another strong adhesive that can bear weight. Ensure that the top is centred and levelled accurately before leaving it to dry for several hours.

Once the adhesive has dried, you can decorate the top of your rotating cake stand as desired. You may wish to add rhinestones, mesh, or other embellishments to give it a "bling" effect.

Your rotating wedding cake stand is now complete and ready to use! This DIY project allows you to customise your cake stand to match your wedding theme and preferences.

Remember to test the stability and smoothness of rotation before placing the cake on the stand. You can also add a non-slip mat between the cake and the stand for added security.

Adding rhinestones to the outer cake pan

Step 1: Gather Your Materials

You will need the following materials: a 12” cake pan, a wide diamond wrap made of faux-rhinestone or premium rhinestone, and a strong adhesive such as glue. You may also want to gather some marbles if you want to create a rotating cake stand.

Step 2: Prepare the Cake Pan

If you want to create a rotating cake stand, also known as a lazy-susan, you can place two cake pans of the same size inside each other. Add marbles inside the two pans for a faster spin. Glue the outer pan to the bottom of the cake form.

Step 3: Attach the Rhinestones

Using your chosen adhesive, carefully attach the rhinestones to the outer cake pan. You can wrap the diamond wrap around the pan and glue it in place.

Step 4: Let It Dry

Follow the instructions on your adhesive of choice and allow sufficient time for the glue to dry.

By following these steps, you will be able to add a touch of bling to your wedding cake stand, creating a beautiful and elegant display for your cake.

Frequently asked questions