Crafting A Wedding Hair Piece: A Step-By-Step Guide

There are many ways to make a hairpiece for a wedding, and it is a great way to add a personal touch to your special day. You can use a variety of materials, such as flowers, lace, ribbon, silk, pearls, or even an old brooch or necklace to create a unique and beautiful hair accessory. Whether you are looking for something simple or a statement piece, making your own hairpiece can be a fun and creative project. You can find inspiration online and purchase materials from sites such as Etsy, or you can upcycle old jewellery or fabric to create something new.

DIY Bridal Head Piece

A DIY bridal headpiece is a fun project to undertake and can add a personal touch to your wedding day look. Here are some ideas to get you started:

Converting an Old Brooch

You can convert an old brooch or other small decorative pieces into a beautiful headpiece. This is a perfect way to add a unique and personal touch to your bridal look.

Silk & Lace Blossom Pin

A silk and lace blossom pin will add a delicate touch to an updo or bun. Its versatility means you can use it for other occasions too.

Feather Hair Comb

Create a vintage-style hair comb for under $10. All you need is a feather and a comb, and you can add a touch of vintage glamour to your bridal hairstyle.

Flower Comb

Adorning your hair with flowers gives a lovely feminine touch. You can make your own flower comb using lace, ribbon, silk, or fresh flowers. This is a perfect project for the bride and bridesmaids.

Flower Crown

Flower crowns are easy to make and highly customizable. You can pick the flowers and adjust the crown to fit your head perfectly. They also make great photo props!

Rhinestone Headband

This elegant and beautiful headband takes just minutes to create. It is a simple yet stunning accessory that can be worn by the entire bridal party.

Birdcage Veil

Add a vintage flair to your bridal attire with a birdcage veil. You can attach a silk or fresh flower to Russian netting for a unique and gorgeous look.

Bridal Headband

Create a charming headband with light blue and ivory tints for the bride to wear on her wedding day or at her bridal shower. It will give a vintage-inspired touch to any hairstyle.

When making your own bridal headpiece, the possibilities are endless! You can use a variety of materials and customize the design to fit your personal style and wedding theme. Happy crafting!

DIY Flower Comb

A floral hair comb is a whimsical and romantic addition to your wedding day look. It is also a simple DIY project that can be made in a few easy steps.

What You'll Need:

• Snips or wire cutters
• Card stock in a subtle colour
• A hair comb (available in various sizes at any general store)
• Hot glue gun
• Cold floral glue (for fresh flowers)
• Flowers of your choice

Step-by-Step Guide:

Step 1: Prepare the Flowers

If using fresh flowers, cut the stems off the flowers you will be using. You want to leave no stem at all so that the flowers can be stuck directly onto the comb with maximum surface area.

Step 2: Design Your Comb

Play around with the placement of the flowers on the comb before adding any glue. Choose a variety of flowers in different sizes and textures to create interest and dimension.

Step 3: Apply the Glue

Pour a small amount of floral glue onto a scrap of cardboard and let it get slightly tacky. Use the stem of a flower to dab the glue and carry it from the cardboard to the comb. Start with your largest flower and work your way down in size.

Step 4: Secure the Flowers

Tuck the stems of the flowers underneath the other flowers to create a natural look. Hold each flower gently in place for a few seconds while the glue dries to ensure it doesn't move.

Step 5: Storage

If you won't be using the flower comb for a few hours, place it in a fully sealed container in the fridge to keep it fresh.

Tips:

• If you're wearing your hair up, a backcomb is a great way to add flowers securely.
• Consider the colour and variety of flowers you choose. Select flowers that complement your (or the wearer's) outfit.
• Choose flowers that can tolerate being out of water for a few hours, such as roses, ranunculus, carnations, or baby's breath.
• For a cohesive look, match the flower comb to the bridal bouquet.

DIY Flower Crown

A flower crown is a whimsical hairpiece that can add a unique touch to your wedding look. Here is a step-by-step guide to creating your own DIY flower crown:

Materials:

First, gather your materials. You will need:

• Wire cutters or scissors
• Flowers such as rosemary, lavender, berries, small roses, or any blooms that hold up well out of water
• Raffia-covered wire or floral wire
• Floral tape in green or brown
• Ribbon (optional)

Step 1: Measure and Cut the Wire:

Measure the circumference of your head, then cut the wire to a length that is twice the measured size. This extra length will be used to wrap around the wire loop for stability.

Step 2: Create the Base:

Wrap one end of the wire with floral tape. Leave 1.5 inches at each end to form a loop. Move to the other end and decide whether you want to create another loop or leave it loose to resemble a hook. Many prefer a combination of a loop on one end and a hook on the other for adjustability.

Step 3: Add Flowers:

Start adding flowers just below the loop, with the blooms facing the loop. Repeat the mantra, "Bloom over stem," meaning the second bloom should cover the stem of the first. Continue this process, alternating placing blooms on top, on the side, and at the bottom of the wire. Work your way around the crown, trying to hide the mechanics of the wire as you go.

Step 4: Finish and Secure:

When you reach the end, get as close as possible to the hook or loop to disguise the mechanics. Depending on your chosen method, either hook the loose end into the loop or use a ribbon to thread through both loops for adjustability. If you feel confident about the size, you can simply tape the two ends together.

Tips:

• Test out the flowers beforehand to ensure they will last in the crown.
• Pay attention to staggering the flowers to cover the mechanics effectively.
• Use double-sided ribbon (velvet, satin, or silk) for a more luxurious finish.
• If using ribbon, clarify whether you prefer a ribbon tie or a complete closure.
• Prepare your flowers by cutting them down to size before adding them to the crown.
• Practice makes perfect! Don't be discouraged if your first attempt isn't flawless.

With these steps and tips, you can create a beautiful DIY flower crown to elevate your wedding hairstyle.

DIY Lace Wedding Veil

A wedding veil can be a beautiful addition to your bridal look, and making your own can be a fun and creative project. Here's a step-by-step guide to crafting a lace wedding veil with a personal touch.

Materials:

• Tulle: Look for a colour that complements your dress; you'll need enough to create your desired length and shape.
• Wide metal bridal comb
• Needle and white thread
• Rotary cutter and cutting board, or fabric scissors
• Lace trim: Choose a lace design that suits your style, and ensure you have enough to go around the edges of your veil.

Step 1: Choose Your Veil Style and Cut the Tulle

Decide on the style of your veil, such as the length, shape, and whether you want a single or double layer. Cut your tulle accordingly, allowing for some trial and error. Don't be afraid to cut and trim the tulle to achieve the perfect shape and drape.

Step 2: Pin and Sew the Lace

With your tulle laid out on a flat surface, pin the lace trim around the edges. You may need to cut slits or darts in the lace to curve it around corners. Then, using a needle and white thread, carefully sew the lace onto the tulle. You can use clear thread if you want your stitches to be less visible.

Step 3: Gather the Top of the Veil

Sew a strip of large straight stitches in the middle of the flat edge of the tulle to gather the fabric. The length of the gathered strip should equal the width of your comb. If you want a poofy veil, gather more fabric or cut a wider strip.

Step 4: Attach the Comb

Orient the veil so that the side with the lace edge is facing the inner curved side of the comb. Sew the comb onto the gathered edge, making sure to secure it firmly. You can do this by wrapping the thread around the comb multiple times.

Tips and Tricks:

• If you want a double-layered veil, cut a circle or oval shape and sew the comb in the centre.
• Refer to online tutorials for guidance on tulle measurements and sewing techniques.
• Don't worry about perfectly matching the colour of your dress; slight variations in white and ivory tones are usually unnoticeable.
• If you want a poofy veil, use more layers of tulle, gather more fabric, or edge it with ribbon or lighter-weight lace.

With these steps and tips, you can create a beautiful and unique lace wedding veil that will perfectly complement your bridal look. Enjoy crafting this special heirloom!

DIY Birdcage Veil

A birdcage veil is a great way to add a unique, handcrafted touch to your bridal look. It's also a wonderful way to save money, as veils can be very expensive. This DIY project is simple and easy to follow. Here is a step-by-step guide to creating your own birdcage veil:

Firstly, gather your materials. You will need a hair comb, either metal or plastic, 3 feet of tulle or netting with small holes, 3 feet of tulle or netting with larger holes, a needle and white thread, and any embellishments you desire, such as feathers or beads.

Now, to the construction. Cut a strip of the small-holed tulle that is 2 inches by 3 feet long. Tie this to one end of the hair comb and wrap it around the comb, in between each tooth, until you reach the end. Then, turn it around and wrap the tulle back down the comb, tying it off with a knot, and trim any excess material.

Next, take the larger piece of tulle and cut it to a size of one foot wide by three feet wide. Trim off the two top corners to create a specific shape.

It's time to get sewing! Thread your needle with a few feet of white thread and tie a knot at the end. Don't worry about being too perfect with this step. Thread the needle through the little cross pieces in the tulle, along the left, top, and right sides of the veil. Once completed, remove the needle and pull the tulle to gather it together. Tie a knot and trim off any excess thread.

Thread your needle again and place the gathered tulle on top of the hair comb. Sew the gathered piece onto the comb, covering the top of the comb with lace. Don't worry if you have to go back and forth to ensure all parts are securely attached.

The final steps! Heat up your glue gun and use it to secure the piece of lace over the top of the comb. You can add any other embellishments you like at this stage. Your DIY birdcage veil is now ready for your big day!

Frequently asked questions