Creating A Curly Wedding Bun: A Step-By-Step Guide

how to make a curly wedding bun

Curly buns are a cute and chic hairstyle that can be worn by anyone, from the bride to a guest, at a wedding. They are easy to do at home and can be adapted to suit different hair types and styles. For example, a loose, low bun works well with curly hair, while straight hair suits a tighter, sleeker style. If you want to add some glamour to your curly bun, why not try adding some curls or waves to frame your face? Or, for a more bohemian look, you could add some flowers or other accessories to your hair.

Characteristics Values
Hair type Curly
Hair texture Wavy, thick, short, medium, long
Hair accessories Hair tie, bobby pins, hair gel, hairspray, hair clips, hair oil, curling iron, comb, headband, scarf, hairpins, hair elastic, hair clip, hairpins
Hair products Heat-protectant, hair oil, anti-frizz hairspray, light-hold hairspray
Steps Flip hair forward, gather hair into a ponytail, twist hair into a coil, secure with bobby pins, add a braid, curl hair with a curling iron, divide hair into sections, wrap hair around fingers, backcomb hair, add curls, twist sections around bun, etc.

shunbridal

Simple messy bun

A simple messy bun is a great hairstyle for a wedding, especially if you're looking for something that is both elegant and easy to do yourself at home. Here is a step-by-step guide on how to create a simple messy bun with curly hair:

Start by gathering your hair into a ponytail at the desired height. If you want a low bun, secure the ponytail at the centre of the nape of your neck. For a slightly higher bun, gather your hair just below the middle of your head. Remember to hold the ponytail in place with one hand and secure it with a hair tie using your other hand.

Next, gently twist the ponytail into a loose coil. Then, wrap this coil around the base of the ponytail to form your bun. It's important to keep this step loose to avoid damaging your curls and to achieve that effortless, messy look. Secure the bun in place with a few bobby pins that match your hair colour.

If you want to add some extra detail to your bun, you can create a 2-strand twist or a 3-strand braid instead of a single coil. Simply wrap this around the base of the ponytail and secure it with bobby pins. You can also pull out a few tendrils of hair to frame your face and make the style slightly less formal.

And there you have it – a simple messy bun that's perfect for a wedding! Finish off with a light mist of hairspray to keep any stray curls in place and add some shine.

shunbridal

Twisted messy bun

A twisted messy bun is a great wedding hairstyle option for curly-haired queens who want to show off the natural beauty and vibrant texture of their tresses. Here is a step-by-step guide on how to create a twisted messy bun:

Start with curly hair. If your hair is not naturally curly, you can use a curling iron to create curls. Before curling, ensure your hair is free of tangles and spray a heat-protectant product. Then, wrap each section of hair around the curling iron for 10-15 seconds.

Next, create a ponytail at the desired height. If you want a low bun, make the ponytail at the centre of the nape of your neck. For a slightly higher bun, place the ponytail a bit higher. Secure the ponytail with a hair tie.

Now, it's time to twist! Gently twist the ponytail into a loose coil, and then wrap the entire coil around the base of the ponytail. Secure it in place with a bobby pin, ensuring you keep the twist loose to avoid damaging your curls.

To finish the look, secure everything in place with a few more bobby pins. Slide them through the bun and its base to hold it firmly in place. If your hair is prone to frizzing, you can use an anti-frizz hairspray. Try to select bobby pins that match your hair colour so they blend in.

And there you have it! A twisted messy bun, perfect for a wedding or any other special occasion. Feel free to add some extra curls around your face to soften the style or leave some tendrils out for a messier, more relaxed look.

shunbridal

Curly hair into a bun

If you have curly hair and want to put it into a bun, there are a few different ways you can do this. Here are two methods, a simple messy bun and a twisted messy bun.

Simple Messy Bun

  • Start with dry hair and have everything you need to hand, including bobby pins and a hair tie. Try to use a hair tie that matches your hair colour.
  • Flip your hair forward, as if you are about to pick something up off the floor, so that your hair hangs straight down.
  • Gather your hair as if you are going to make a ponytail.
  • Slide the hair tie onto your hair and pull it halfway through so that the ends are caught, but the rest of your hair is sticking out in a loop.
  • Wrap the hair tie around your hair a couple more times at the base of the loop until it is holding your hair securely.
  • Tug on each side of the bun to make it fluffier and messier.
  • Tuck any loose ends in and pin them in place with bobby pins, or leave a few sticking out for a messier look.
  • To hide the hair tie, wrap a loose strand of hair around the base of the bun and pin it in place.

Twisted Messy Bun

  • Start with dry hair. If your hair is tangled, gently use a wide-toothed comb to remove the tangles.
  • Gather your hair into a high ponytail. If you want a smoother look, lean forward so that your hair hangs straight down first.
  • Wrap a hair tie around the base of the ponytail.
  • Wrap your hair around the base of the ponytail. If you have a lot of layers, twist your hair into a loose rope first.
  • Wrap another hair tie around the base of your bun.
  • Secure your bun with bobby pins if necessary, especially if your hair is heavy.
  • Tug on the bun to make it messier and pull out some strands of hair with a wide-tooth comb.
  • Spray a generous amount of hairspray to keep the bun in place.

shunbridal

Curly bun with straight hair

To create a curly bun with straight hair, follow these steps:

Firstly, curl your hair with a curling iron. Ensure your hair is free of tangles and spray a heat-protectant product on your tresses and comb it through. Preheat your curling iron, then wrap each section of hair around the curling iron for 10 to 15 seconds. Each hair section should be small enough so that you can wrap it around the wand without much hair overlapping.

Next, divide your hair into four sections: the right side, the left side, the top middle, and the bottom middle. Put a hair clip in each of your side sections and the top section to keep them out of the way. Leave the bottom section loose.

Now, wrap your hair to create a bouncy curl. Separate a strand about 2 inches (5.1 cm) wide from the bottom section. Hold two fingers close to its roots at the nape of your neck and wrap the strand around your fingers. Secure this new curl in place with two bobby pins. Repeat this process with a second strand of hair, but make the new curl sit slightly askew in relation to the first. Keep adding curls until all of the bottom section is pinned up.

Then, backcomb at your crown. Take a handful of hair at the back of your crown and gently backcomb or "tease" it. Hold the hair vertically and run a comb through it from the tips towards the roots. Make sure there is a layer of unteased hair in front. Teasing this section will add volume to naturally straight hair, which can often end up too flat when put into an updo.

Continue to make more pin curls with the hair from your top section, just as you did with the bottom section. However, instead of pinning these new curls at the roots, pin them on and around the bottom section's curls. As you layer, a clear bun should begin to form.

Finally, twist the side sections around the bun. Take your right section and twist it to the left, bringing it over and around your bun. Pin the ends to the roots. Repeat this with your left section, wrapping it towards the right. Leave one or two curly wisps loose in front of your ears.

And there you have it—a beautiful curly bun with straight hair!

shunbridal

Curly braided messy bun for weddings

What you'll need:

  • Bobby pins
  • Hair ties
  • Hairspray
  • Curling iron (optional)
  • Hair oil (optional)
  • Flowers or other hair accessories (optional)

Method:

Start by dividing your hair into two sections, one larger than the other. The larger section will be used to create the bun, while the smaller section will be braided.

If your hair is straight, curl it before proceeding to add texture and volume. You can also add hair oil to define your curls.

Take the larger section and gather it at the base of your neck to form a loose ponytail. Secure it with a hair tie. Gently twist the ponytail into a coil and wrap it around the base to form your bun. Pin it in place with bobby pins, leaving it slightly loose to avoid damaging your curls.

Now, take the smaller section and create a simple braid. Don't braid it too tightly, as you want it to be soft and flexible. Secure the end of the braid with a hair tie.

Drape the braid over your bun and wrap it around, tucking the end underneath. Secure it with bobby pins.

If desired, add some tendrils or flyaways around your face to soften the look and enhance that romantic, effortless vibe.

Finish with a light mist of hairspray to hold everything in place.

For an extra touch of glamour, you can add some flowers, hair accessories, or a sparkly hairpin to your bun.

Frequently asked questions

A simple way to make a curly wedding bun is to start with dry hair, flip your hair forward, and gather it into a ponytail. Secure the ponytail with a hair tie, and then wrap the hair around the base to form a bun. You can adjust the bun to your liking and use bobby pins to keep it in place.

To incorporate a braid into your curly wedding bun, first, section your hair into two parts. Put the right section into a bun as usual. Then, braid the left section and wrap it around the bun. Secure the braid with bobby pins.

To create a curly wedding bun with straight hair, start by curling your hair with a curling iron. Then, divide your hair into four sections and wrap each section around your finger to create curls, pinning them in place. Tease the hair at the crown for added volume, and then twist the side sections around the bun and pin them in place.

For a quick and easy messy curly wedding bun, start with dry hair and flip your hair forward. Gather your hair into a ponytail and secure it with a hair tie. Pull your hair halfway through the hair tie to create a loop, and then wrap the hair tie around the base a few more times. Adjust the bun to your liking and use bobby pins to secure any loose ends.

For short hair, gather your hair into a ponytail and secure it. Then, take small sections of hair, wrap them around your finger, and pin them in place to create a bun. You can adjust the bun to your liking and pull out some strands for a messier look.

Written by
Reviewed by
Share this post
Print
Did this article help you?

Leave a comment