Keep Your Rings Together, Forever

There are several ways to keep your engagement and wedding rings together without soldering. One option is to use a ring guard, also known as an insert ring, which is a single ring with a band that splits into two halves, allowing you to slip your engagement ring in between. Another option is to use a ring adjuster, which can be band-style, spring-style, or clip-on, and helps to make the rings fit more snugly. You can also use a thin, flexible metal wire to wrap around the rings and hold them together. Alternatively, you can try connecting the rings with a small device attached to the inner side of the rings, joining them without altering the original rings. Finally, you can tie the rings together with a string that matches their colour.

Ring adjusters

You can buy ring adjusters online from sites such as Amazon and Walmart, and they are available in packs of various quantities. They are a low-cost solution, with prices ranging from $3.48 to $11.98.

To use a coil ring adjuster, wrap the coil around the base of your ring and cut off any excess. Clip-on adjusters simply snap into place. Both options are invisible when worn and comfortable, and they can even be used to connect multiple rings.

Ring guards

There are two main types of ring guards: single band and two connected bands. Single band ring guards, also known as "ring wraps", are similar to wedding bands but are designed to curve around your engagement ring for extra protection. They can be placed above or below your engagement ring and are often chosen as anniversary bands. Two connected bands, or "insert rings", combine two single bands into one piece, with the engagement ring inserted into the centre. These designs are often more extravagant, featuring clusters of diamonds or twisted infinity knot designs.

When choosing a ring guard, it's important to consider the size and shape of your solitaire, as well as the style of your engagement ring. You may also want to try on different sizes to ensure a perfect fit, as thicker bands may require sizing up. Additionally, consider the maintenance costs of the ring guard, especially if you are rough with your jewellery.

Ring wires

To use ring wires, you will need to find a wire that matches the colour of your rings. Then, fit your rings together, ensuring that the ends are perfectly aligned and smooth. There should be no excess wire that is visible or that could scratch your skin. If you notice that the rings pull apart after connecting them, you can use an extra wire to hold them more securely.

It is recommended to consult a professional jeweller when using ring wires, as they can help you choose the most comfortable option and ensure that the wire is wrapped securely. Additionally, different designs of wires are available, so selecting the right type is essential.

While ring wires are a convenient option, they may not work for all ring sizes. This method is suitable only if your rings are slightly bigger, allowing the connector wire to pass under and hold them together. If your rings are too tight, you may need to consider alternative solutions, such as ring adjusters or guards, which can be made of plastic or metal.

Overall, ring wires offer a simple and affordable way to keep your engagement and wedding bands together without the permanence of soldering.

Connectors

One option for keeping your engagement and wedding rings together without soldering is to use connectors. These are small devices that attach to the inner side of the rings, joining them without any alteration to the original rings. This method is temporary and reversible, allowing you the flexibility to wear the rings together or separately as desired.

One type of connector is a ring wire. Ring wires are thin, flexible metal wires that can be wrapped around the rings to hold them together securely. You can purchase these from your local jeweller, or online.

Another option is to use a ring guard, also known as an insert ring. This is one ring with a band that splits into two halves. You can slip your engagement ring between the two halves of the ring guard and wear the set as one piece. Ring guards are decorative and can function as wedding bands.

A third option is to use a ring adjuster. A band-style or spring-style ring adjuster slips inside an existing ring to narrow the ring diameter. A small, clip-on adjuster attaches to the bottom of a ring to add bulk and take up extra space. You can also use a clip-on adjuster to fasten the bottoms of two ring bands together. Monitor the fit of your rings and use a larger or smaller adjuster as necessary to ensure a perfect fit.

Resizing beads

It is important to note that ring sizing beads cannot be stuck to metals such as ceramic carbide, tungsten, or titanium as these metals do not react to the soldering process. Additionally, certain coloured coatings on bands are flammable and may change colour or react oddly to the soldering process.

Frequently asked questions