Lyla Dejesus
Getting a spray tan before your wedding can be a great way to achieve a flawless glow. However, it can also be a source of anxiety for brides, as there is a risk of the tan rubbing off on the wedding dress, leaving unwanted stains. While some brides have opted for a Versa Spa spray tan, which is known for its streak-free and non-staining formula, others have shared their experiences with spray tans transferring onto their dresses, particularly those made of raw silk. To avoid this issue, some brides recommend skipping the tan or opting for a hand-applied spray tan a few days before the wedding. Additionally, there are techniques to remove fake tan stains from wedding dresses, such as soaking the gown in hot water for an extended period and using dish soap or bleach for spot treatment.
Explore related products
What You'll Learn
Wash the dress in hot water and leave it to soak for 11 hours
If you're looking to get fake tan stains out of a wedding dress, one method you can try is washing the dress in hot water and leaving it to soak. In fact, one Australian woman managed to restore her gown to its original condition using this method, removing all traces of fake tan, makeup, and dirt stains from the bottom of the dress.
To achieve this, start by filling a bathtub with hot water and adding your chosen detergent. Then, submerge the wedding dress and let it soak for 11 hours. Remember to change the water every three hours or so to maintain the temperature.
After the 11 hours are up, carefully remove the dress from the tub and hang it up to dry naturally, making sure it's not exposed to direct sunlight. This method should help lift the fake tan stains from the fabric, leaving your wedding dress looking pristine and stain-free.
It is important to note that this method may not work for all fabrics, and some dresses may require professional cleaning. Always check the care instructions for your dress and consider consulting a specialist for valuable or delicate items.
Addressing Married Couples on Wedding Invites: Etiquette Guide
You may want to see also
Explore related products
$33.04 $49.99
Change the water every three hours
If you're worried about fake tan stains on your wedding dress, it's important to act fast. First, turn the dress inside out and run the underside (not the part that made contact with the tan) under cold water until it runs clear. Then, change the water every three hours, repeating the process.
If the stain is particularly stubborn, you can try a few other methods. One option is to use a clean rag with some dishwashing soap, lightly rubbing it over the affected area. You can then wash the dress on a warm cycle with a white-specific stain remover and repeat if necessary.
Another approach is to soak the dress in hot water for an extended period, around 11 hours. The water should be changed every three hours or so, as it starts to cool down. This method was shared by a woman in an Australian Facebook group, who successfully removed fake tan stains from her wedding gown. She washed the gown in her bathtub three times, changing the water each time it cooled, and achieved impressive results.
If you're concerned about the risk of staining, it may be best to avoid getting a spray tan close to your wedding day. Some brides have shared their experiences of spray tans rubbing off on their dresses, especially with certain fabrics like raw silk. To be safe, consider getting a spray tan at least a few days before your wedding or opting for a different tanning method altogether.
In any case, it's always a good idea to test out your tanning and dress choices ahead of time to ensure you don't encounter any unpleasant surprises on your special day.
The Value of Vintage: Wedding Dresses
You may want to see also
Explore related products
$43.98 $46.98
$59.99 $64.99
Avoid mystic spray tans
If you're looking to achieve a bronzed bridal glow, it's best to avoid mystic spray tans. Mystic spray tans are automated booth spray tans that can leave you with missed areas and streaks.
Mystic spray tans are known to cause streaking and missed areas, which is the last thing you want on your wedding day. While they may be quick and convenient, taking just 3 minutes, the risk of an uneven tan is not worth it for your wedding.
The key to a flawless tan is in the preparation, so it's important to take the time to properly prep your skin. This includes shaving or waxing at least 24 hours beforehand and exfoliating with a dry brush, scrub, or acid to ensure an even surface for the tan.
For a safe and even tan, consider a hand-applied spray tan or a professional airbrush tan. These options allow for more control and precision, reducing the risk of missed areas or streaking. Additionally, a professional spray tan artist can guide you in choosing the right shade and formula to ensure your tan looks natural and complements your dress.
If you do decide to go with a mystic spray tan, it's recommended to have a trial run first to test the color and ensure it doesn't rub off on your dress. However, for your wedding day, it's best to avoid any potential disasters by opting for a different tanning method.
Allison Webb Wedding Dresses: How Much Do They Cost?
You may want to see also
Explore related products
$33.99 $39.99
Try a hand-applied spray tan
If you're worried about the potential mess and hassle of a spray tan, you might want to consider a hand-applied spray tan. This method can ensure a more even application and reduce the risk of missed areas, which could be a concern on your wedding day.
One user on Weddingbee.com recommends hand-applied spray tans over machine-applied tans, as the latter can result in missed areas. They suggest Isle of Paradise's tanning mister, which retails for £8.21 and can be used at any angle to reach all the hard-to-tan areas.
However, it's important to remember that even hand-applied spray tans require proper preparation and aftercare. Exfoliation and moisturization are crucial steps to achieving an even tan that fades naturally. Shaving or waxing should be done at least 24 hours before the tan application to ensure your skin has time to recover and provide a more comfortable experience.
Additionally, you should allow your tan sufficient time to settle. Ideally, you should get your spray tan a few days before your wedding dress fitting to ensure the colour has settled and potentially faded a bit. This will give you an accurate idea of how the tan complements your dress and whether any adjustments are needed.
Remember, it's always a good idea to do a trial run with your chosen spray tan method and colour before your wedding. This will allow you to make any necessary adjustments and ensure a flawless glow on your special day.
Toilet Paper Wedding Dress Game: How Many Rolls?
You may want to see also
Explore related products
$29.99 $32.99
$29.99 $38.99
Use a tanning mitt to blend over hands and feet
To get a perfect faux glow on your wedding day, it is important to pay attention to the tricky areas of your hands and feet. Here is a step-by-step guide to achieving a flawless and natural-looking tan on your hands and feet using a tanning mitt:
Step 1: Prepare Your Skin
Before applying any tanning product, it is crucial to prepare your skin. Exfoliate your hands and feet thoroughly 24 hours before tanning. This will ensure an even surface for the tan to be applied, resulting in a natural-looking finish. Additionally, consider applying a clear coat of nail polish to your nails to prevent discolouration.
Step 2: Moisturise Dry Areas
Apply a small amount of moisturiser to your hands and feet, focusing on dry areas such as your knuckles, heels, and cuticles. This step will ensure perfect blending and prevent the tan from over-developing in these areas.
Step 3: Apply Tan with a Tanning Mitt
Using a tanning mitt, stretch your fingers into a claw shape and apply a small amount of tanning mousse to your hand. Blend the product down from your wrist, carefully navigating around your fingers and avoiding your knuckles. Repeat this process for your other hand, ensuring you hold each hand in a claw shape to access all areas.
Step 4: Buff and Blend
Once you have applied the tan to your hands, use a cloth or the back of your hand to buff and blend any excess product from your knuckles and wrists. You can also use a small amount of normal lotion and blot it into your knuckles, wrists, and between your fingers to soften the tan and prevent any harsh lines.
Step 5: Clean Up
Finally, use a makeup wipe or a wet wipe to remove any unwanted tan from your palms, nails, cuticles, and the sides of your fingers. Ensure you also clean up the indents of your knuckles and your wrists.
By following these steps and using a tanning mitt to blend over your hands and feet, you can achieve a natural and flawless tan that complements your wedding dress.
Wedding Paper Divas: Envelope Address Printing Service?
You may want to see also
Frequently asked questions
If the fake tan stain is recent, flip the dress and run the underside under cold water until it runs clear. Next, put dishwashing soap onto a clean rag and rub it lightly over the affected area. Then, wash the dress on a warm cycle with an added white-specific stain remover. Repeat if necessary. If this doesn't work, you can treat the discoloured area with bleach, but only if the fabric is white.
To prevent fake tan stains on your wedding dress, it's recommended to get a spray tan at least two days before the wedding. This will allow enough time for the tan to settle and for you to shower and wash off any excess.
To avoid staining your wedding dress, opt for a clear spray tan solution that doesn't contain cosmetic bronzer. While this option won't give you an instant tan, it will develop over 12 hours and reduce the risk of staining.
If the fake tan stain persists, consider taking your wedding dress to a professional dry cleaner. They have specialised stain removal techniques and will be able to assess and treat the stain effectively.
