Personalizing Your Wedding Cake Knife And Server

If you're looking to save money on your wedding, you might consider decorating your own wedding cake knife and server. A decorated set can cost over $30, but a plain set can be purchased for as little as $8-$10, and with a few simple materials, you can easily add your own personal touch. This is a quick and easy DIY project that can be completed in just a few minutes, and it will give your wedding that extra special touch.

Using satin and organza ribbon

Materials:

• 12 inches of 2" satin ribbon
• 12 inches of 7/8" satin and organza ribbon
• 1/8" satin ribbon
• A flower embellishment

Steps:

• Begin with the 2" satin ribbon as the base for your decoration. Fold it around the handle of the server, allowing the ends to slightly overlap at the back. Secure this in place by tying it with a 12-inch piece of the 1/8" satin ribbon, leaving the excess ribbon hanging down.
• With the 7/8" satin and organza ribbon, create a bow that's slightly smaller than the base ribbon. You can use a variety of colours and widths available to match your wedding theme. Tie this smaller bow with another 12-inch piece of the 1/8" satin ribbon.
• Combine the two bows by tying them together, allowing the thin strands to hang down gracefully. This combination of satin and organza ribbons will add a unique, elegant texture to your decoration.
• Attach the bows to the handle of the server using another 12-inch strand of the 1/8" satin ribbon. This will serve as the finishing touch to secure your ribbon decoration in place.
• As a final flourish, add a flower embellishment to the centre of the bows. Choose a flower that is as flat as possible to avoid bulkiness. This flower can be in a colour that complements your ribbon choices and wedding palette.
• For a polished look, cut all the thin satin ribbons at one length, slightly longer than the organza and satin bow. This will give your decoration a graceful, flowing appearance.

By following these steps and using satin and organza ribbons, you can create a beautifully decorated wedding cake knife and server that reflects your personal style and adds a touch of elegance to your special day.

Adding a flower

Purchase or source a plain cake knife and server set, which can be found at a reasonable price. You can opt for a simple set made from materials like stainless steel or sterling silver.

Next, gather your decorative materials. You will need some ribbon in the colour and fabric of your choice. Consider using a wider ribbon for the base and then a ribbon that is half the size for the second layer. You can play around with different textures and colours to match your wedding theme. For instance, you could use satin and organza ribbons, adding an elegant and luxurious touch.

Now, it's time to start assembling. Take your wider ribbon and fold it around the handle of the server, securing it with a thin piece of ribbon at the back. You can use hot glue to ensure that the ribbon stays in place. Then, create a bow with the smaller ribbon, securing it with a thin piece of ribbon as well. Layer this smaller bow on top of the wider ribbon, creating a textured and dimensional look.

Finally, it's time to add the flower. Choose a fabric flower that complements your ribbon choice and wedding colour palette. Try to find a flower that is relatively flat, so it doesn't overpower the design. Secure the flower on top of the bows, using hot glue or a thin piece of ribbon. You can also add some rhinestones or other embellishments to the centre of the flower for added sparkle.

By following these steps, you can create a beautiful and personalised wedding cake knife and server set, adding a special touch to your big day without spending a fortune.

Using hot glue

Hot glue is a great way to decorate a wedding cake knife and server without spending a fortune. You can purchase a plain cake knife and server for a low price and then decorate it yourself. Here is a step-by-step guide on how to use hot glue to create a beautiful and personalised wedding cake knife and server:

Firstly, gather your materials. You will need a plain cake knife and server, hot glue, ribbons of your choice, and any additional decorations you want to add, such as flowers, rhinestones, or crystals. Consider using ribbons in your wedding colours or a combination of satin and organza ribbons for a luxurious look.

Now, it's time to start assembling! Cut your chosen ribbons to the desired length, usually around 12 inches. You can use multiple ribbons of different widths and textures to create a layered and interesting design. Fold the widest ribbon with the ends slightly overlapping at the back of the handle and secure it with a thin strand of ribbon or hot glue.

Create bows with the remaining ribbons, securing them with thin strands of ribbon. Layer the bows on top of each other, allowing the thin strands to hang down gracefully. Use hot glue to attach the bows to the handle of the knife or server, positioning them neatly above or below the wider ribbon.

Embellish your design further by adding flowers, rhinestones, or crystals using hot glue. If you want to include a personal touch, consider engraving your names and wedding date on the knife. You can also ask your wedding florist to create a matching boutonniere to incorporate into your design.

Finally, let your creativity flow and experiment with different ribbon colours, textures, and embellishments to make your wedding cake knife and server truly unique. This DIY project is a wonderful way to add a personal and memorable touch to your special day without breaking the bank!

Rhinestones and other gems

One way to do this is to use hot glue to attach a ribbon around the handle of the knife and server. You can then glue rhinestones and other gems on top of the ribbon. You could also add a fabric flower, or other embellishments, to the handle. This is a simple DIY project that can be completed in a short amount of time and will add a special touch to your wedding.

Another option is to purchase a set that already has rhinestones or gems on the handles. For example, the Silver Rhinestone Cake Server & Knife from Hobby Lobby features handles with octagon, diamond-cut acrylic rhinestones. This set is also available at a low cost, so it's a great option if you don't want to spend a lot of money but still want to add some sparkle to your wedding cake-cutting ceremony.

Etching designs

Etching is a popular way to decorate a wedding cake knife and server. Aaron's Etching offers a range of personalised designs, including a military air force-themed set and a flaming motorcycle biker-themed set. Both sets feature stainless steel blades, ornate acrylic crystal handles, and custom etching. You can add names, dates, and other details to create a cherished memento.

The military air force-themed set is perfect for a couple who appreciate the elegance of etched designs and want a subtle way to incorporate their interests into their wedding day. The design features an etched Air Force theme that matches Aaron's Etching's topper, flutes, and plates. This set is an excellent choice for those seeking a unique and thoughtful touch without being too flashy.

On the other hand, the flaming motorcycle biker-themed set is ideal for couples who want to showcase their passion for motorcycles. The blades are expertly etched with custom biker designs, and you can include the couple's names and wedding date for a truly personal touch. This set is sure to impress and will be a cherished keepsake for the newlyweds.

When it comes to etching designs, you can also consider incorporating other wedding themes or motifs that are special to the couple. For example, if the couple loves nature, you could etch designs of flowers, leaves, or trees. If they are fans of a particular sports team, you could incorporate their logo or colours into the etching. The possibilities are endless, and etching is a wonderful way to add a unique and personalised touch to the wedding cake knife and server.

Frequently asked questions