George Boyle
Wrist loops are a romantic way to carry the train of a wedding dress. They can be especially useful when manoeuvring a dress without assistance, such as when getting into a car or taking photographs. However, some sources suggest that they are not suitable for dancing as the train can get heavy quickly. Wrist loops can be purchased online, or made at home by sewing a silk cord or satin ribbon to the underside of the train.
| Characteristics | Values |
|---|---|
| Materials | Double-sided satin ribbon, silk cord |
| Width of ribbon | 1/2" wide |
| Sewing technique | Sewn to the center back seam on the underside of the train about 1/3 of the way from the hem to the waist |
| Wrist loops vs. bustles | Wrist loops are considered more romantic than bustles, but trains can get heavy quickly, especially when dancing |
| Placement of wrist loop | Typically on the right wrist for the first dance, then moved to the left wrist |
| Attaching to a lace dress | Sew the wrist loop about an inch back on the underlay, being careful not to pierce the top layer of fabric |
Explore related products
$19.99
$16.19 $18.99
What You'll Learn
- Wrist loops are a romantic way to carry the train of your wedding dress
- You can buy a wrist loop train bracelet for your wedding dress on Etsy
- To make your own, use double-sided satin ribbon and sew it to the centre back seam
- Make a small opening in the seam for the loop to slip through to the outside
- Wrist loops are handy for getting into cars and taking photos, but not for dancing
Wrist loops are a romantic way to carry the train of your wedding dress
Wrist loops can be especially helpful if you are eloping and will not have assistance with your dress. They can also be a good alternative to a bustle, which some brides find unattractive. One bride on WeddingBee noted that her wrist loop was a nice addition to her dress and saved her money. She also noted that the wrist loop was able to hold the weight of her heavy skirt and did not rip.
If you are handy with a needle and thread, you can even add a wrist loop to your dress yourself. One way to do this is to use a nice piece of silk cord or double-sided satin ribbon and hand sew it onto the underside of your dress. Just be careful not to pierce through the top layer of fabric. You can also attach a wrist loop by stitching on buttons and loops, hooks and eyes, or ribbon ties.
However, some brides have noted that trains can get heavy over the course of the night, so you may want to consider a bustle as well, so you don't have to hold the train for the entire time.
Finding Your Dream Wedding Dress at J. Crew
You may want to see also
Explore related products
You can buy a wrist loop train bracelet for your wedding dress on Etsy
If you're looking to add a wrist loop to your wedding dress, you can buy a wrist loop train bracelet on Etsy. This is a convenient option if you'd prefer not to take your dress to a seamstress. Etsy seller StylishBrideAtelier offers a wrist loop train bracelet that can be sewn onto your dress. The product is listed as a bracelet for SBA dresses, train bustle, ring for train, long train hand bustle, or train loop.
The production time for custom products is 4-5 weeks, and for simpler products such as skirts, it is 3-4 weeks. If you have an urgent order, you can add the "Rush My Order" option to your cart to have your order fulfilled as soon as possible.
The wrist loop train bracelet is an elegant solution for managing your wedding dress train, especially if you plan to dance at your wedding. It can be sewn onto the underside of the train, about one-third of the way from the hem to the waist. You can then make a small opening in the seam for the loop to slip through to the outer side of the train, so you can place it on your wrist.
The wrist loop bracelet is a convenient way to carry your train, and it can also be a romantic addition to your wedding ensemble. It is a popular choice, with many Etsy shoppers favouring the product.
Chiffon Sweetheart Ruching: The Perfect Short Wedding Dress
You may want to see also
Explore related products
To make your own, use double-sided satin ribbon and sew it to the centre back seam
Wrist loops are a romantic way to carry the train of a wedding dress. They can be particularly useful for elopements or small weddings where there won't be anyone to help the wearer manoeuvre their dress.
To make your own wrist loop, you can use double-sided satin ribbon. First, cut a length of ribbon that is wide enough to easily slip onto your wrist. Sew this length of ribbon to the centre back seam on the underside of the train, about one-third of the way up from the hem to the waist. Then, make a small opening in the seam and slip the loop through to the outer side of the train. This will usually be worn on the right wrist for the first dance and can be moved to the left wrist as the right arm tires.
It is important to note that wrist loops can get heavy, especially for longer trains, and some people may find them uncomfortable to dance with. As such, it may be a good idea to also have a bustle or another method of carrying the train.
Heather Rae Young's Wedding Dress: The Cost and Design
You may want to see also
Explore related products
Make a small opening in the seam for the loop to slip through to the outside
To add a wrist loop to a wedding dress, you will need to make a small opening in the seam for the loop to slip through to the outside. This can be done by first deciding on the placement of the loop and then carefully cutting a small opening in the seam. Here is a step-by-step guide:
- Decide on the placement of the wrist loop: The loop can be attached to the underside of the train about one-third of the way from the hem to the waist. Alternatively, you can set the wrist loop lower on the centre back seam or attach it at the very back of the train.
- Prepare the loop: Cut a piece of fabric, such as a nice 1/2" wide section of double-sided satin ribbon, long enough to slip easily onto your wrist. You can also use a nice piece of silk cord or something similar.
- Sew the loop: Before sewing, be careful not to pierce through the top layer of fabric. Sew the loop onto the underside of the train, making sure it is secure.
- Create the opening: Make a small cut or opening in the seam, close to where the loop is attached. This opening should be just large enough for the loop to slip through.
- Slip the loop through: Gently slip the loop through the opening to the outside of the train. Check that the loop is not twisted and that it can move freely.
- Adjust and finish: Adjust the length of the loop to ensure a comfortable fit on your wrist. You can also add a button or other fastening to secure the loop around your wrist. Finally, check that the knot and any stitches are hidden and secure.
By following these steps, you can add a wrist loop to your wedding dress, allowing you to manoeuvre and dance with ease while still enjoying the romantic look of the train.
Creating the Perfect Wedding Dress: Hemming and Bustling
You may want to see also
Explore related products
Wrist loops are handy for getting into cars and taking photos, but not for dancing
Wrist loops are a great way to manage your wedding dress, especially if you're looking to elope or have a small wedding with just the two of you. They can be a romantic way to carry the train of your dress and are handy for getting into cars and taking photos. However, they may not be the best option for dancing.
Wrist loops can be easily added to your wedding dress by using a nice 1/2" wide section of double-sided satin ribbon. This ribbon should be long enough to slip onto your wrist easily and can be sewn to the centre back seam on the underside of the train about 1/3 of the way up from the hem. You can also use silk cord or something similar and hand sew it underneath, being careful not to pierce the top layer of fabric. This way, when you pick up your dress by the wrist loop, you'll be carrying the underlayer, and the lace will be picked up with it.
While wrist loops are great for convenience and photos, they may not be the most practical for an entire day of activities. The weight of the train on your arm can get heavy very fast, and you might find it more comfortable to switch to a bustle for the reception and dancing. This is especially true if you have a long and heavy dress.
If you're set on having a wrist loop for your wedding dress, you can always try it out by pinning a loop to the base of the centre back seam near the hem and seeing if you like the effect. You can also ask your photographer for their input, as they may have experience with what works best for photos and dancing.
Ultimately, the decision to add a wrist loop to your wedding dress depends on your personal preference and the style of your dress. While they can be handy for certain activities, they may not be suitable for all-day wear, especially if you plan on dancing the night away.
Royal Wedding Dresses: How Much Did They Cost?
You may want to see also
Frequently asked questions
A wrist loop is a romantic way to carry the train of a wedding dress. It is a strap that goes around the wrist to hold up the train of the dress, especially when dancing.
You can use a 1/2" wide piece of double-sided satin ribbon that is long enough to slip onto your wrist easily. Sew this ribbon to the centre back seam on the underside of the train about 1/3 of the way up from the hem. Then, make a small opening in the seam for the loop to slip through to the outside so you can place your wrist through it.
A wrist loop is not the only way to carry your wedding dress train. You can also use a bustle, which is a set of buttons at the back of the dress that can be used to hitch up the train.
You can buy a wrist loop for your wedding dress online from sites like Etsy.
