How To Resize Your Patterned Wedding Ring

can a patterned wedding ring be made bigger

Wedding rings can be made bigger, but the process depends on the material and design of the ring. For example, if the ring is made of a soft metal like gold or silver, a jeweler may use a ring stretcher tool to expand the metal. If the ring is made of a more durable metal like platinum or titanium, the jeweler may suggest replacing the entire band. In some cases, the ring may need to be cut and soldered to add extra metal. This process can be more complicated and expensive if the ring has an intricate pattern or design. It's important to consult a professional jeweler to determine the best method for resizing and to ensure that the ring's integrity is not compromised.

Characteristics Values
Can a patterned wedding ring be made bigger? Yes
Maximum number of sizes a ring can be modified 2 sizes
Cost of resizing $20 for a simple resizing or more than $100 for a difficult job
Metals that can be resized Silver, gold, platinum
Metals that cannot be resized Tungsten, titanium, stainless steel
Other materials that cannot be resized Wood, glass, quartz
Types of rings that cannot be resized Eternity bands
Other options to make a ring bigger Ring stretching, adding sizing beads or a ring guard, replacing the shank, adding a ring sizer

shunbridal

Ring stretching

  • Slide the hollow bottom of the ring stretcher into its base.
  • Place the ring around the hollow mandrel and insert the pin.
  • Use a rawhide hammer to gently hammer the top of the stretcher.
  • Try on the ring to check if the size is correct. If not, hammer the ring again.

It is important to note that ring stretching should only be done on rings made of softer metals such as gold or silver. Stretching a ring will weaken the metal, so it is important not to overstretch the ring, as this could cause it to break. Rings should only be stretched up to half a size bigger, as anything more will require a professional jeweller to cut the ring and add metal.

shunbridal

Sizing beads

If your ring is too tight, the sizing beads can be removed to make the ring larger.

shunbridal

Ring guard

A ring guard is a small, thin piece of metal that is placed around the inside of a ring band to create a tighter fit, making the ring effectively smaller. They are best suited for rings with thin bands. If a ring is too tight, the ring guard can be removed to make the ring larger again. Ring guards are available in a variety of sizes and materials, including plastic, silicone, and metal. They can be purchased online and at jewelry stores.

While ring guards are a convenient way to adjust the size of a ring, they should only be used temporarily as prolonged use can damage the band. As such, it is recommended that you consult a professional jeweler for a permanent resizing.

shunbridal

Ring shank replacement

If your wedding ring is made of a durable metal such as platinum or titanium, a jeweller may recommend replacing the entire shank (or band) of the ring to make it bigger. This process involves removing the original shank and replacing it with a new, larger one. This method is typically more expensive than other ring resizing methods but is necessary for more complex ring designs.

The cost of a ring shank replacement will depend on several factors, including the type of metal, the thickness of the shank, and the complexity of the work involved. For example, stainless steel and platinum will typically be more expensive due to the complexity of working with these metals.

When replacing a ring shank, it is important to find a replacement shank made from the same type of metal and colour to ensure a seamless repair. Master Bench Jewellers will use state-of-the-art tools and techniques to ensure the restoration quality is exceptional.

shunbridal

Ring sizer

A ring sizer is a small piece of metal placed inside the ring band to create a tighter fit on the finger. A jeweller can add or remove the sizer to adjust the size of the ring as needed. This method is best for rings with a wider band.

There are several types of ring sizers:

  • Inserts: horseshoe-shaped inserts that make the ring up to a ring size smaller
  • Ring sizing beads: keep the ring upright when it’s slightly loose
  • Fold-over device: a latch that opens when you put on the ring and closes to secure the ring
  • Plastic ring sizers: these can be used without the help of a jeweller

The most accurate way to measure ring size is by using a ring-measurement tool. Ring-sizing tools fall into two categories: a thin measuring tape or a keyring lined with a gradient of ring sizes.

Frequently asked questions

Yes, a patterned wedding ring can be made bigger, but the process and cost will depend on the material and design of the ring.

There are several methods to make a wedding ring bigger, including ring stretching, adding sizing beads or a ring guard, replacing the ring shank, or adding a ring sizer. The best method will depend on the specific ring.

Yes, jewelers can typically resize a ring by a maximum of two sizes up or down without causing too much stress on the metal.

The cost of making a wedding ring bigger will depend on the method used, the complexity of the ring design, and the type of metal used. Simple resizing can start at around $20, while more complex jobs can cost over $100.

If your wedding ring no longer fits comfortably, you can consider getting it resized by a professional jeweler. Additionally, taking care of your hands, removing the ring when necessary, and storing it properly can help ensure a comfortable fit over time.

Written by
Reviewed by
Share this post
Print
Did this article help you?

Leave a comment